SUNMON K669 Foam Mic Windscreen (K669B)
Bottom line: The SUNMON K669 Foam Mic Windscreen ($5.59 on Amazon as of 2026-11-21 23:23 UTC): Sized for Fifine K669, T669 and K669B USB condenser mics; main trade-off: only one cover per pack, no spare included.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Sized for Fifine K669, T669 and K669B USB condenser mics
- ✓ Softens plosive P and B pops on close-miked voiceovers
- ✓ Cuts breath and light air noise for podcasts and streams
- ✓ Slip-on foam fit with no tools or mounting hardware needed
- ✓ Helps shield the mic grille from dust and breath moisture
Cons
- ✗ Only one cover per pack, no spare included
- ✗ Made for the Fifine K669 family; other mics may not fit
- ✗ Foam will not block room noise like keyboards or fans
- ✗ Seller lists no dimensions or foam density
Manufacturer description
The SUNMON K669 Foam Mic Windscreen is a replacement pop filter and wind cover made for the Fifine K669, T669 and K669B USB condenser microphones. If you record podcasts, stream, or cut YouTube voiceovers on one of these Fifine mics, this foam cover slips over the capsule. It softens the plosive bursts from hard P and B sounds and cuts down breath noise before it reaches your recording. It is sized for the Fifine K669 family, not sold as a generic one-size cover, so it fits that mic body instead of hanging loose and sliding off mid-session. SUNMON pitches it for quick videos, interviews and…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for SUNMON K669 Foam Mic Windscreen, so this read rests on the manufacturer's listed specs and the current price in the streaming gear category (how we evaluate). Compare with similarly-priced alternatives in the streaming gear category before committing. On the listing's own facts, the case for it is "Sized for Fifine K669, T669 and K669B USB condenser mics"; the main trade-off is "Only one cover per pack, no spare included". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- As the perfect mic pop filter, wind screen foam cover compatible with Fifine USB-powered podcast audio microphone for streaming broadcast and YouTube videos.
- K669 669B mic pop filter helps to reduce surrounding sounds, ensuring that your mic is isolated from background noise.
- The foam makes the microphone for recording audio sound 100% better and clearer. This windshield is a really handy tool for protecting audio.
- The wind shield has been great for quick videos, interviews, and voiceovers (for radio/TV).
- Package included 1 x Foam Windscreen Cover.
Full Specifications
| UPC | 793740658593 |
|---|---|
| ASIN | B07YC7GBYP |
| Brand | SUNMON |
| Color | FiFine K669B Mic Foam Cover |
| Impedance | 300 Ohms |
| Model Name | K669 or T669 or K669B |
| Item Weight | 0.01 Pounds |
| Manufacturer | KarmaDirect |
| Model Number | K669 or T669 or K669B |
| Power Source | Corded Electric |
| Audible Noise | 78 Decibels |
| Polar Pattern | Unidirectional |
| Built-In Media | Foam Windscreen Cover |
| Connector Type | USB |
| Frequency Range | 20 hz 20 khz |
| Mfr Part Number | K669 or T669 or K669B |
| Special Feature | USB |
| Antenna Location | Streaming, Video Recording, Voice Recording |
| Hardware Platform | Television |
| Compatible Devices | Personal Computer |
| Full listing title | SUNMON K669 Foam Mic Windscreen, Pop Filter Wind Cover Compatible with Fifine USB Condenser Recording Microphone K669, T669, K669B |
Ready to buy?
SUNMON K669 Foam Mic Windscreen, Pop Filter Wind Cover Compatible with Fifine USB Condenser Recording Microphone K669, T669, K669B is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Streaming Gear
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- What Rig Runs an AI Agent Locally? Building for the Agent Era
- Best SSD for a PS4 Pro Upgrade in 2026: 870 EVO vs BX500
- Intelligence Index v4.1: The Agentic-Benchmark Shift and Your Local Rig
- Best Budget 4K Monitor for an RTX 3060 Build in 2026: SANSUI vs KOORUI vs ASUS TUF
- Best Game Controllers for PC in 2026
- Sound Blaster Audigy FX in a Period-Correct WinXP Build: 2026 Install and Tuning Guide
- Best Streaming Gear for Twitch Beginners in 2026
- Best Gaming CPU for 1440p Builds in 2026
- Period-Correct Win98 Build in 2026: CompactFlash, Drivers, Glide
- Best Budget GPU for Local LLMs in 2026: The 12GB RTX 3060 Case
- Kimi K3 Sold Out the Cloud — Can You Run It Locally?
- Ryzen CPU Deals 2026: 5600X, 5800X3D and 9800X3D Price Lines
- ROG Ally X vs Steam Deck OLED: 2026 Buying Guide
- The Budget Streaming Starter Kit: Mic, Light, and Webcam Under $250
- 3dfx Voodoo5 5500 PCI Boots in a Modern ASUS Z77 Board
- Intel Panther Lake on Linux: First Core Ultra X7 Numbers Land
- AVX-512 Speeds Up Linux Software RAID by Up to 41% on AMD Ryzen
- Best Retro-PC Storage & Drive-Imaging Kit in 2026: 5 Picks
- ComfyUI on an RTX 3060 12GB: Real Image-Gen Throughput in 2026
- Best PC Gaming Peripherals Under $50 in 2026
- Ryzen 7 5800X vs Ryzen 7 5700X for 1440p Gaming: Is the Premium Worth It?
- RTX 4080M Desktop Build: 100W Gaming vs. RX 9070 GRE
- GPU-Accelerated Autorouter Handles Monstrous PCB Designs
- FIDECO vs Unitek vs Vantec: The Best IDE-to-USB Adapter for Rescuing Retro Drives in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090