Inateck

Inateck USB 3.0 to IDE/SATA External Hard Drive Reader Applicable to 2.5"/3.5" HDD/SSD, with 12V/2A Power Supply, SA03001

Name: Inateck USB 3.0 to IDE/SATA External Hard Drive Reader Applicable to 2.5"/3.5" HDD/SSD, with 12V/2A Power Supply, SA03001
Brand: Inateck
SKU: B08BNPXSJ9
Price: 35.99 USD
Availability: InStock

By Mike Perry, Hardware Editor · Verified 2026-09-15

Mike Perry has researched PC hardware since 2014, tracking 80+ GPU generations, 50+ retro handheld platforms, and 30+ vintage PC configurations. He synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides. View full credentials →

$35.99

As an Amazon Associate, SpecPicks earns from qualifying purchases.

View Current Price on Amazon → Compare to similar external storage

*Price sourced from Amazon.com. Last updated 2026-08-22. Price and availability subject to change.

Bottom line: The Inateck USB 3.0 to IDE/SATA External Hard Drive Reader Applicable to 2.5"/3.5" HDD/SSD, with 12V/2A Power Supply, SA03001 is a specs-and-price decision rather than a crowd-consensus one in the external storage category, priced around $35.99. Check the specification table above against one or two close alternatives — on price and spec fit, not on star ratings.

The Inateck SA03001 is a USB 3.0 to IDE/SATA adapter built for the exact job retro PC builders and drive-recovery hobbyists keep running into: reading a stack of legacy disks without mounting them in a machine. It carries three connectors on one board - a SATA III port plus separate 2.5" and 3.5" IDE headers - so you can pull data off a 2.5" or 3.5" SATA HDD, a SATA SSD, or an old IDE drive, and run one IDE and one SATA disk at the same time. Transfer runs at up to 5Gbps over USB 3.0, with backward compatibility down to USB 2.0 and 1.1 if you are plugging into older hardware. The bundled…

SpecPicks Verdict

SpecPicks scored Inateck USB 3.0 to IDE/SATA External Hard Drive Reader Applicable to… using a rating × review-volume × price-fit model applied to our editorial and benchmark analysis across the external storage category. Inateck's external storage lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for external storage of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the Amazon listing before purchase. Prices, stock, and Prime eligibility update directly from Amazon's catalog and may have moved since this page was last verified.

Frequently Asked Questions

Can this read both IDE and SATA drives at the same time?

Yes. The adapter has one SATA III connector and two IDE connectors (2.5" and 3.5"), and Inateck states you can operate two drives simultaneously - one IDE and one SATA.

Do I need a separate power supply for a 3.5" hard drive?

No, a 12V/2A power supply is included. Note that a 3.5" IDE disk additionally needs a 4-pin power cable, or it may not be recognized.

Does it work on a Mac?

Inateck lists Mac OS 10.x support, along with Windows 11, 10, 8, 7, Vista, and XP in 32-bit and 64-bit. It is plug and play with no driver install described.

How fast is the transfer speed?

Up to 5Gbps over USB 3.0. It is backward compatible with USB 2.0 and 1.1, so older ports will work but at their own lower ceiling.

Can I use it to rip discs from an old optical drive?

Yes, it supports SATA DVD-ROM, CD-RW, DVD-RW, and DVD+RW optical drives in addition to 2.5"/3.5" SATA and IDE hard drives and SSDs.

Pros & Cons

Pros

✓ Backed by Inateck's warranty and support channels
✓ Ships via Amazon with Prime eligibility and the standard returns policy

Cons

✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
✗ Price, stock, and Prime eligibility update from Amazon and may have changed since this page was last verified

Key Features

Universal USB to SATA/IDE Adapter: Supports 2.5"/3.5" SATA HDD and SSD, 2.5"/3.5" IDE HDD, SATA DVD-ROM, CD-RW, DVD-RW, DVD+RW Optical Drive,two IDE connector Plus one SATA III connector. Tip: The 3.5" IDE hard disk needs to be used with a 4-pin power cable, otherwise it may not be recognized
Works with up to 3 HDDs: This USB 3.0 to IDE and SATA adapter is equipped with a SATA III connector and 2 IDE connectors (one 2.5" and one 3.5"). It allows users to operate 2 HDDs (One IDE and One SATA ) simultaneously. It’s compatible with 2.5"/3.5" IDE/SATA hard drives
High Speed Transfer: Data transfer speed reaches up to 5Gbps. Backward compatible with USB 2.0/1.1
Support Systems: Windows 11/XP/Vista/7/8/10(32bit and 64bit); Mac OS 10. X. Tip: Windows XP only supports hard disks with a capacity of no more than 2TB
Additional Functions: Plug and play; support hot swap; on/off switch for HDD protection. Led light shows power and activity status

Full Specifications

Brand	Inateck
Color	black
Unit Count	1 Count
Connectivity	USB
Model Number	SA03001
Compatibility	Switch, Mac
Built-In Media	1 * SA03001, 1 * power adapter
Mfr Part Number	SA03001-BK
Number of Items	1
Support Systems	Windows 11/XP/Vista/7/8/10(32bit and 64bit); Mac OS 10. X. Tip: Windows XP only supports hard disks with a capacity of no more than 2TB
Hardware Platform	PC
Compatible Devices	Laptop
Data Transfer Rate	5 gigabits_per_second
Enclosure Material	Plastic
Hardware Interface	IDE, SATA 3.0 Gb/s
High Speed Transfer	Data transfer speed reaches up to 5Gbps. Backward compatible with USB 2.0/1.1
Additional Functions	Plug and play; support hot swap; on/off switch for HDD protection. Led light shows power and activity status
Warranty Description	1 Year
Hard Disk Form Factor	3.5 inches
Memory Storage Capacity	10 TB

Ready to buy?

Inateck USB 3.0 to IDE/SATA External Hard Drive Reader Applicable to 2.5"/3.5" HDD/SSD, with 12V/2A Power Supply, SA03001 is available on Amazon with Prime shipping and the full Amazon returns policy. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

View Current Price on Amazon →

*Price sourced from Amazon.com. Last updated 2026-08-22. Price and availability subject to change.