Timetec 256GB SSD NVMe PCIe Gen3x4 8Gb/s M.2 2280 3D NAND High Performance SLC Cache Read/Write Speed Up to 2,000/1,600 MB/s Internal Solid State Drive for PC Laptop and Desktop
Bottom line: The Timetec 256GB SSD NVMe PCIe Gen3x4 8Gb/s M.2 2280 3D NAND High: Up to 2,000MB/s read and 1,600MB/s write over PCIe Gen3x4; main trade-off: 256GB fills fast if you store games or video.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Up to 2,000MB/s read and 1,600MB/s write over PCIe Gen3x4
- ✓ Five-year limited warranty with free tech support
- ✓ 1,500,000-hour MTBF rating from Timetec
- ✓ SLC cache absorbs burst writes and extends NAND lifespan
Cons
- ✗ 256GB fills fast if you store games or video
- ✗ No mounting screw, bracket, or cables in the box
- ✗ Gen3 ceiling leaves Gen4 and Gen5 slot bandwidth unused
- ✗ No DRAM cache stated, so sustained large writes may slow
Manufacturer description
The Timetec 256GB NVMe SSD is a PCIe Gen3x4 M.2 2280 drive built for the moment an aging laptop or budget desktop needs a boot-drive transplant without a platform upgrade. Sequential reads reach up to 2,000MB/s and writes up to 1,600MB/s, with SLC cache technology absorbing bursts so short file transfers land at the top of that range instead of trailing off. Timetec rates the drive at 1,500,000 hours MTBF and backs it with a five-year limited warranty plus free technical support, which is unusually long coverage at this capacity tier. The controller stack handles S.M.A.R.T. reporting, TRIM…
SpecPicks Verdict
SpecPicks scored Timetec 256GB SSD NVMe PCIe Gen3x4 8Gb/s M.2 2280 3D NAND High… using a rating × review-volume × price-fit model applied to published specs and reviews across the ssds & storage category. Timetec's ssds & storage lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for ssds & storage of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this SSD fit my laptop?
It fits any desktop or laptop with an M.2 2280 slot wired for NVMe PCIe Gen3x4. Measure the slot length (2280 means 22mm x 80mm) and confirm the slot is NVMe, not SATA-only M.2, before ordering.
How fast is the Timetec 256GB NVMe SSD?
Timetec rates it at up to 2,000MB/s sequential read and 1,600MB/s sequential write. SLC cache technology helps sustain those peaks on shorter transfers.
Does it work in a PCIe Gen4 or older Gen2 motherboard?
Yes. The drive is backward compatible with PCIe Gen 2 and Gen 1 and supports NVMe 1.3, including next-generation Intel and AMD platforms. In a Gen4 slot it runs at its Gen3 ceiling.
What operating systems are supported?
Windows 11, 10, 8.1, 8 and 7, plus Linux kernel 2.6.33 or later. S.M.A.R.T., TRIM, and garbage collection are supported so modern OS maintenance tools work normally.
What warranty comes with this drive?
Timetec includes a five-year limited warranty with free technical support, and rates the drive at 1,500,000 hours MTBF. Check the product listing for current warranty terms in your region.
Key Features
- NVMe PCIe Gen3x4 3D NAND Breakthrough Read and Write Speeds: Sequential Read Speed up to 2,000MB/s and Write Speed up to 1,600MB/s, the advanced SLC Cache Technology allows performance boost and longer lifespan
- An industry-leading 1,500,000 hours mean time before failure (MTBF)
- Compatible with Operating Systems Windows 11 / Windows 10 / Windows 8.1 / Windows 8 / Windows 7, Linux 2.6.33 or later; Compatible with desktops and laptops that accept M.2 2280 NVMe PCIe Gen3x4 SSD, Backwards Compatible with backward compatible to PCIe Gen 2 and Gen 1; Support latest NVMe 1.3 protocol, Support the next-generation platforms of Intel and AMD.
- Support S.M.A.R.T. technology, TRIM command functions, Garbage Collection technology, Wear-Leveling technology, Power Management Support for APST / ASPM, RAID, ECC (Error Correction Code), LDPC (Low-Density Parity Check) , ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface to provide the optimized performance.
- Included Contents: M.2 2280 NVMe PCIe3x4 SSD (All Other Cables, Screws, Brackets Not Included); Five years limited warranty with free technical support service
Full Specifications
| Brand | Timetec |
|---|---|
| Color | Black |
| Model Name | 35TTFP6PCIE-256G |
| Read Speed | 1600 megabytes_per_second |
| Form Factor | M2 |
| Media Speed | 1000 megabytes_per_second |
| Model Number | 35TTFP6PCIE-256G |
| Compatibility | PC, Linux |
| Built-In Media | SSD |
| Hard-Drive Size | 256 GB |
| Number of Items | 1 |
| Special Feature | SSD |
| Hardware Platform | PC, laptop |
| Included Contents | M.2 2280 NVMe PCIe3x4 SSD (All Other Cables, Screws, Brackets Not Included); Five years limited warranty with free technical support service |
| Installation Type | Internal Hard Drive |
| Compatible Devices | Desktop, Gaming Console |
| Data Transfer Rate | 2000 megabytes_per_second |
| Enclosure Material | 3D Nand |
| Additional Features | SSD |
| Hard Disk Interface | Raid |
Ready to buy?
Timetec 256GB SSD NVMe PCIe Gen3x4 8Gb/s M.2 2280 3D NAND High Performance SLC Cache Read/Write Speed Up to 2,000/1,600 MB/s Internal Solid State Drive for PC Laptop and Desktop is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related SSDs & Storage
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Raspberry Pi Zero W vs Pi 4 for a 2026 Cyberdeck: Which Board Fits?
- What a $15 Raspberry Pi Zero W Can Still Do in 2026
- N100 Mini PC vs Raspberry Pi 4 for Home Assistant in 2026
- Kimi K3 Lands #5 on Coding Agents: What You Can Actually Run Local
- Best Sim Racing Wheel and Shifter for Beginners in 2026
- Intel Optane DIMMs Run 1-Trillion-Parameter LLM on One Workstation
- Best SSD for a 1TB+ Steam Library in 2026: SATA vs NVMe Showdown
- How to run Llama 3.1 8B on Apple M4 Max
- AMD Instinct MI300X vs Radeon RX 7600 XT: Datacenter vs Desk
- Best Sim Racing Wheel for PC and Console in 2026
- Is the KOORUI 27-inch 4K Mini-LED a Real Upgrade for Console Gaming?
- Best Steam Deck Docked Setup for a 4K Desk in 2026: Dock, Monitor, Storage
- Best PCI Serial and IDE Adapters for Retro PCs in 2026
- llama.cpp MTP support landed - Qwen3.6 27B at 2.44× on a Strix Halo, 2.17× on a RTX 3090 rig
- pxpipe Hides Prompts in PNGs to Cut Claude Code Tokens 70% — Or Just Run Local on an RTX 3060
- Optimizing LTX-2.3 Inference Speed on an RTX 3080 Ti
- Voodoo3 3000 Period-Correct Build Log: Quake 3 + UT99 LAN Rig for 1999
- Best SSD for PS4 Pro Upgrade in 2026: SATA Picks That Actually Cut Load Times
- Throw a Modern Retro LAN Party in 2026: The Hardware Checklist
- How to run Qwen 3 14B on Arc B580
- GPU VRAM Guide: Running a 5GB TTS Model Locally
- Best Budget SSDs for Homelab and Proxmox Boot Drives in 2026
- Best Mechanical Keyboard for Office and Gaming Crossover (2026)
- Local LLM vs Claude in 2026: When On-Device Beats the API
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090