Skip to main content
PCIe SATA Controller Card 10 Port with 10 SATA Cables and Low Profile Bracket - 6Gbps 3.0 PCIe Card,Support 10 Port 3.0 Devices
MZHOU

MZHOU PCIe SATA Controller Card 10 Port with 10 SATA Cables and Low Profile Bracket

Bottom line: The MZHOU PCIe SATA Controller Card 10 Port ($48.99 on Amazon as of 2026-10-06): Ten SATA 3.0 ports at 6 Gbps from a single PCIe slot; main trade-off: no hardware RAID; Intel RAID can't use these ports.

$48.99

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.

Pros & Cons

Pros

  • ✓ Ten SATA 3.0 ports at 6 Gbps from a single PCIe slot
  • ✓ All 10 SATA cables included, so no extra purchase to wire every port
  • ✓ Low profile bracket in the box for slim and SFF cases
  • ✓ No driver install needed on most supported systems
  • ✓ Listed support for Windows XP/8/10, Mac, NAS and Ubuntu

Cons

  • ✗ No hardware RAID; Intel RAID can't use these ports
  • ✗ Windows 7 not recommended, since the system may hang
  • ✗ Ports share bandwidth through the JMB575 multiplier under heavy parallel load
  • ✗ Listing doesn't state the card's PCIe lane width

Manufacturer description

The MZHOU PCIe SATA Controller Card turns one expansion slot into ten SATA 3.0 ports, each rated for 6 Gbps. If your motherboard ran out of SATA headers before your drive bay did, this card lets you connect up to 10 hard drives or SSDs at the same time. That makes it a good fit for NAS builds, media servers, Plex boxes and home-lab storage arrays. MZHOU puts ten SATA cables in the box, so you can wire up every port right away without buying extra leads. A low profile bracket is also included for slim and small-form-factor cases. The card uses a 1166 controller paired with a JMB575 chip…

SpecPicks Verdict

SpecPicks scored MZHOU PCIe SATA Controller Card 10 Port using a rating × review-volume × price-fit model applied to published specs and reviews across the expansion cards category. MZHOU's expansion cards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for expansion cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

How many drives can I connect to the MZHOU 10-port PCIe SATA card?

Up to 10 SATA devices at the same time. Each port supports SATA 3.0 at 6 Gbps, and ten SATA cables come in the box.

Do I need to install a driver for this SATA expansion card?

Usually not. The manufacturer says no driver is needed for normal use. If your system does need one, you have to contact the seller for it.

Does this card support RAID?

No. The 10-port card doesn't support RAID, and Intel's onboard RAID only works with the motherboard's native SATA ports. For redundancy, use software RAID in your OS or NAS platform.

Will it work with Windows 7, Mac, or a NAS?

It's listed as compatible with Windows XP, 8 and 10, Mac, NAS systems and Ubuntu. Windows 7 is not recommended because the system may hang.

Will the card fit a slim or small form factor case?

A low profile bracket is included for slim cases. Check your case's slot clearance, and remember you'll need to route up to ten SATA cables.

Key Features

  • With this PCIe SATA card, you can add 10 SATA 3.0 6 Gbps devices to your computer (No need to install a driver and contact the seller if need the driver).
  • The PCIe SATA card contains ten SATA cables to simplify the connection!
  • Use the 1166+JMB575 chip to improve card stability and compatibility.
  • Connect 10 mass storage devices at the same time. With Windows XP/8/10 / MAC / NAS / Ubuntu(Not recommended to use win 7, it may be stuck).
  • Note: The 10-port does not support RAID. The RAID in INTEL is only for original SATA. It is an expansion card that cannot support third-party chips.

Full Specifications

NoteThe 10-port does not support RAID. The RAID in INTEL is only for original SATA. It is an expansion card that cannot support third-party chips.
BrandMZHOU
StyleClassic
Style NameClassic
Unit Count1.00 Count
Model Number10SATA
CompatibilityMac
Mfr Part NumberPCIE 10SATA
Compatible DevicesPersonal Computer, Server
Hardware InterfacePCIE x 4
Warranty Description1 year
Full listing titlePCIe SATA Controller Card 10 Port with 10 SATA Cables and Low Profile Bracket - 6Gbps 3.0 PCIe Card,Support 10 Port 3.0 Devices

Ready to buy?

PCIe SATA Controller Card 10 Port with 10 SATA Cables and Low Profile Bracket - 6Gbps 3.0 PCIe Card,Support 10 Port 3.0 Devices is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $48.99

*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.

Related Expansion Cards

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →