Skip to main content
XRDS-RF 100W PL259 UHF Male Plug RF Dummy Load, 50 Ohm
XRDS -RF

XRDS-RF 100W PL259 UHF Male Plug RF Dummy Load, 50 Ohm

Bottom line: The XRDS-RF 100W PL259 UHF Male Plug RF Dummy Load ($45.49 on Amazon as of 2026-11-20 19:15 UTC): Flat VSWR of 1.2 or lower across the full DC-520 MHz range; main trade-off: single PL259 male connector only; N-type or BNC rigs need an adapter.

$45.49 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ Flat VSWR of 1.2 or lower across the full DC-520 MHz range
  • ✓ 100W rating covers most HF and VHF transceiver tune-up sessions
  • ✓ PL259 UHF male plug mates directly with SO239 radio jacks, no adapter
  • ✓ Nickel-plated copper shell with silver-plated center pin
  • ✓ Rated -55 to +125 C, so garage and field use stay in spec

Cons

  • ✗ Single PL259 male connector only; N-type or BNC rigs need an adapter
  • ✗ 100W ceiling rules out amplifier testing above that level
  • ✗ 520 MHz upper limit excludes 900 MHz and 1.2 GHz bands
  • ✗ No published duty-cycle rating, so long key-down runs are guesswork

Manufacturer description

Description:XRDS-RF 50 ohm 100W PL259 UHF male plug rf dummy load for your need.Product Specification:Impedance: 50ohmVSWR:≤ 1.2Frequency Range: DC~520 MHzRF Connector Type: PL259 UHF MaleWorking Temp:-55 ~ +125 ℃Package Include:1 x 100W PL259 UHF male plug rf dummy load1 x Plastic dust capThe construction of XRDS-RF PL259 UHF male dummy load is solid, it’s compact, and it does what it’s supposed to do.

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for XRDS-RF 100W PL259 UHF Male Plug RF Dummy Load, so this read rests on the manufacturer's listed specs and the current price in the power supplies & cables category (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. On the listing's own facts, the case for it is "Flat VSWR of 1.2 or lower across the full DC-520 MHz range"; the main trade-off is "Single PL259 male connector only; N-type or BNC rigs need an adapter". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • 100W PL259 UHF Male Plug DC-520 MHz dummy load
  • Frequency Range: DC to 520MHz. VSWR:≤ 1.2
  • Connector Type: PL259 Male. Impedance: 50ohm
  • Adapter Material: The outer shell is nickel plated copper, and the inner needle is silver plated copper
  • Working Temp:-55 ~ +125 ℃

Full Specifications

BrandXRDS -RF
Connector TypePL259 Male. Impedance: 50ohm
Frequency RangeDC to 520MHz. VSWR:≤ 1.2
Adapter MaterialThe outer shell is nickel plated copper, and the inner needle is silver plated copper
Package Dimensions9.61 x 5.2 x 1.77 inches

Ready to buy?

XRDS-RF 100W PL259 UHF Male Plug RF Dummy Load, 50 Ohm is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $45.49

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Power Supplies & Cables

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →