Cablecc PCI Express PCI-E 3.0 & Dual SATA to NGFF NVME MSATA M-Key B/M-Key SSD Card Adapter 3in1
Bottom line: The Cablecc PCI Express PCI-E 3.0 & Dual SATA to NGFF NVME MSATA M-Key: Runs NVMe, B/M-key and mSATA SSDs at the same time from one PCIe 3.0 slot; main trade-off: mSATA and B-key drives still need their own SATA cables run to the motherboard.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Runs NVMe, B/M-key and mSATA SSDs at the same time from one PCIe 3.0 slot
- ✓ No driver install - the three drives hand straight off to the operating system
- ✓ Powered entirely from the PCIe port, so no extra power lead is needed
- ✓ Accepts 2230, 2242, 2260 and 2280 M.2 sticks plus full-size mSATA
- ✓ Mixes PCIe NVMe and SATA-protocol drives on one card, so odd SSD stock still fits
Cons
- ✗ mSATA and B-key drives still need their own SATA cables run to the motherboard
- ✗ Only the M-key NVMe slot uses PCIe bandwidth; the other two are capped at SATA speed
- ✗ Z97 or newer chipset required, so older retro boards are out
- ✗ Vendor lists Windows 10 or later as the system requirement
Manufacturer description
PCI Express PCI-E 3.0 & Dual SATA to NGFF NVME MSATA M-Key B/M-key SSD Card Adapter 3in1The three SSD Can work at same time.Transfer to the operating system and does not require any software drivers.For MSATA SSD, You need to connect the SATA cable to Motherboard SATA Port.For NGFF B/M-key or B-Key SSD, You need to connect the SATA cable to Motherboard SATA Port.For NGFF M-key NVME SSD, You need to connect the PCI-E to Motherboard.Powered from PCI-E port for three SSDs. no need extral power.Support Type 2230/2242/2260/2280 type M.2 SSD and MSATA SSD.System requirement:Motherboard: Z97 or…
SpecPicks Verdict
SpecPicks scored Cablecc PCI Express PCI-E 3.0 & Dual SATA to NGFF NVME MSATA M-Key… using a rating × review-volume × price-fit model applied to published specs and reviews across the expansion cards category. cablecc's expansion cards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for expansion cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- The three SSD Can work at same time.Transfer to the operating system and does not require any software drivers.
- For MSATA SSD, You need to connect the SATA cable to Motherboard SATA Port.
- For NGFF B/M-key or B-Key SSD, You need to connect the SATA cable to Motherboard SATA Port. For NGFF M-key NVME SSD, You need to connect the PCI-E to Motherboard.
- Powered from PCI-E port for three SSDs. no need extral power.
- Support Type 2230/2242/2260/2280 type M.2 SSD and MSATA SSD. System requirement:Motherboard: Z97 or later and Windows 10 or later.
Full Specifications
| Brand | cablecc |
|---|---|
| Style | PCI-E 16X PORT |
| Style Name | PCI-E 16X PORT |
| Unit Count | 3 Count |
| Model Number | SA-028 |
| Mfr Part Number | SA-028 |
| Compatible Devices | Personal Computer, Laptop |
| Hardware Interface | PCI |
Ready to buy?
Cablecc PCI Express PCI-E 3.0 & Dual SATA to NGFF NVME MSATA M-Key B/M-Key SSD Card Adapter 3in1 is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Expansion Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Open-WebUI + Ollama on RTX 3060 12 GB: A 2026 Self-Hosted Stack
- CompactFlash to IDE 50-Pin Adapters: A Retro Storage Buyer's Guide for 2026
- Claude Sonnet 5 Costs ~$2.29/Task: When an RTX 3060 Rig Breaks Even
- Raspberry Pi 5 16GB for Local LLMs: What Models Actually Fit?
- Why NVIDIA's New AI Servers Use Hot-Tub Coolant
- Secluso: Private DIY Home Security on a Raspberry Pi 4
- SATA/IDE to USB Adapters in 2026: FIDECO vs Unitek vs Vantec for Retro PC Data Recovery
- Hailo-8 vs Hailo-8L vs Coral TPU: Which AI Accelerator Wins on Raspberry Pi 5?
- Best GPU for an AI rig in 2026 — the shortlist
- Best Mini PC for Local LLM Inference in 2026
- 2026 Homelab Stack: OPNsense + Proxmox + TrueNAS + 10GbE
- Best Plug-and-Play Retro Gaming Consoles to Buy in 2026
- Build a Raspberry Pi Retro Handheld in 2026: Parts and Setup
- Sega Genesis Mini vs Raspberry Pi Emulation in 2026: Which to Buy?
- Does Dual-Channel RAM Matter for Local LLM Inference?
- OpenAI Says 'Chat Is Dead': Building a Local Agent Rig in 2026
- Zero-CPU-Overhead OV7725 Camera Streaming on RP2350
- 4K Gaming PC Build 2026: Cost, Parts, FPS
- Running Qwen3.6 35B A3B at 80 tok/s on a 12GB GPU: The MTP Setup Guide
- LattePanda Sigma vs Raspberry Pi 4 8GB: x86 Windows SBC vs ARM Linux for Edge AI Workloads in 2026
- Building a Local AI-Agent Eval Rig After AISI's Benchmark Warning
- UT99 OldUnreal 469 Patch in 2026: Migrate Configs, Rejoin Modern Servers, and Tune Mouse Precision
- AMD Ryzen 7 7700X3D Lands as a Newegg Exclusive at $329
- Best Budget Upgrades to Revive an Old Gaming PC in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090