Jienk 20PCS 9×9×5mm Aluminum Heatsink with Thermal Conductive Adhesive Tape
Bottom line: The 20PCS 9×9×5mm Aluminum Heatsink with Thermal Conductive Adhesive Tape: Pre-applied blue thermal adhesive tape, peel and stick, no cutting needed; main trade-off: tiny 9mm size limits heat capacity versus larger finned coolers.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Pre-applied blue thermal adhesive tape, peel and stick, no cutting needed
- ✓ 9x9x5mm anodized aluminum fits tight VRM, MOSFET and regulator spots
- ✓ Works on GPU, motherboard, stepper drivers, BeagleBone and Pi regulators
Cons
- ✗ Tiny 9mm size limits heat capacity versus larger finned coolers
- ✗ Adhesive tape bond is weaker than screw or clip mounting under vibration
- ✗ No cutting flexibility, fixed square footprint may not fit odd chips
- ✗ Passive-only cooling, needs airflow to shed heat in enclosed cases
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for 20PCS 9×9×5mm Aluminum Heatsink with Thermal Conductive Adhesive Tape, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. On the listing's own facts, the case for it is "Pre-applied blue thermal adhesive tape, peel and stick, no cutting needed"; the main trade-off is "Tiny 9mm size limits heat capacity versus larger finned coolers". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 9mm anodized aluminum heatsink; Dimension: 0.35 x 0.35 x 0.20 inch / 9 x 9 x 5mm (L*W*H)
- Pre-applied blue thermal conductive adhesive tape backing, easy attach to the application with no cutting to do.
- 【Application】Can be applied for cooling VRM GPU Motherboard MOSFET Voltage Regulators, chips, stepper motor driver module and other small electronics that didn't come with any cooling.
- Aluminum alloy, great function for heat dissipation. Reduces CPU and LAN Temperature in enclosed and overclocked environments.
- Can be used with other devices such as the Beaglebone to cool processors, regulators, etc.
Full Specifications
| Brand | Jienk |
|---|---|
| Model | JT371-374 |
| CPU Socket | Universal |
| Dimensions | 0.35 x 0.35 x 0.20 inch |
| Part Number | JT371-374 |
| Mounting Type | PCB Mount |
| Number of Items | 20 |
| Included Components | Aluminum Heatsink |
| Cooler Heatsink Material | Aluminum |
| Item Dimensions L x W x H | 0.35"L x 0.35"W x 0.2"H |
| Cooler Heatsink Compatibility | Universal |
| Full listing title | 20PCS 9×9×5mm Aluminum Heatsink with Thermal Conductive Adhesive Tape | Black,for Cooling VRM GPU Stepper Driver MOSFET VRam Regulators |
Benchmark data for other processors
Ready to buy?
20PCS 9×9×5mm Aluminum Heatsink with Thermal Conductive Adhesive Tape | Black,for Cooling VRM GPU Stepper Driver MOSFET VRam Regulators is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Imaging Vintage Hard Drives in 2026: SATA/IDE-to-USB Adapters Compared (FIDECO vs Unitek vs Vantec)
- GLM-5.2 vs Qwen3 on a 12GB GPU: Best Open-Weights LLM for an RTX 3060
- Best GPU for 1080p Esports in 2026: Why the RTX 3060 12GB Still Delivers
- Best AM4 Gaming CPU in 2026: Ryzen 7 5800X vs 3700X vs 3900X vs Intel i7-9700K
- What PC Specs Do Big YouTubers Actually Run in 2026?
- Best Retro Gaming Consoles and Controllers to Buy in 2026
- Real Productivity on 32-64GB RAM for Local LLMs
- Best GPU for Stable Diffusion and Local Image Generation in 2026
- GPT-5.5 Instant Shipped: What an RTX 3060 12GB Local Stack Covers When OpenAI Retires a Model
- NVMe vs SATA SSD for Local LLM Model Libraries in 2026
- Gemma 4 and Larger Qwen 3.6: What Hardware You'll Actually Need
- JADEPUFFER Agentic Ransomware: Why a Local AI Rig Changes Your Threat Model
- RTX 3060 12GB vs Ryzen 9 3900X for Qwen2.5 14B: GPU or CPU in 2026?
- Best Wired Controller for Fighting Games on PC (2026)
- CRT vs LCD for Retro Gaming: Which Wins in 2026?
- Sound Blaster Audigy 2 ZS in a 2026 WinXP Build: The Last True EAX Card
- Best Gaming Desk Setup Essentials in 2026: 5 Picks
- NVIDIA RTX PRO 6000 Blackwell vs RTX A6000: Is 96 GB Worth $4,000 More?
- Best NVMe SSD for PC Gaming Builds in 2026
- Strix Halo Gaming Benchmarks: What AMD's APU Can Really Do
- Muse Spark 1.1 Beats GLM-5.2 at Coding — Does It Change the Local-Rig Question?
- Best Raspberry Pi Accessories for Home-Lab Builds in 2026
- Samsung SSD Brand Guide 2026: Every Drive Worth Buying
- Self-Hosted Home Assistant on a Raspberry Pi 4 8GB (2026 Build)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090