SRA Soldering Products SRA Soldering Wick
Bottom line: The SRA Soldering Products SRA Soldering Wick: 30 total feet of .098in braid across three 10ft spools; main trade-off: .098in standard width is too wide for fine 0402 or SMD pads.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 30 total feet of .098in braid across three 10ft spools
- ✓ No-clean 3% flux wicks solder fast with no cleanup step
- ✓ Impurity-free woven copper conducts even at low temps
- ✓ RoHS compliant; residue is non-conductive and non-corrosive
Cons
- ✗ .098in standard width is too wide for fine 0402 or SMD pads
- ✗ Three short 10ft spools, not one long continuous roll
- ✗ No-clean flux still leaves faint residue purists wipe off
- ✗ Needs a properly hot iron; cool tips wick solder slowly
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for SRA Soldering Products SRA Soldering Wick, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. On the listing's own facts, the case for it is "30 total feet of .098in braid across three 10ft spools"; the main trade-off is ".098in standard width is too wide for fine 0402 or SMD pads". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 10ft Super Sized Desolder Spools: 30 Feet of standard width .098" desoldering wick infused with no-clean flux for fast and efficient solder wicking action.
- High Quality Materials: Impurity-free woven copper desolder braid construction with 3% no-clean flux provides superior conductivity, even at low temperatures.
- Easy to Use: Simply place desolder wick over work and apply heat to remove solder from parts and terminals, break solder bridges, and correct other soldering mistakes.
- Fast & Effective Wicking: Unique gap-weave coated solder wick braid absorbs solder quickly like a sponge, reducing the likelihood of overheating and lifted pads.
- PCB Safe Residues: Desolder wick leaves little flux residue that is non-conductive and non-corrosive so it requires no cleaning. This product is also RoHs compliant.
Full Specifications
| Size | 3 Pack |
|---|---|
| Brand | SRA Soldering Products |
| Material | copper |
| Part Number | SW-2.5-NC-10-3P |
| PCB Safe Residues | Desolder wick leaves little flux residue that is non-conductive and non-corrosive so it requires no cleaning. This product is also RoHs compliant. |
| Package Dimensions | 5.67 x 2.13 x 0.51 inches |
| Item Package Quantity | 1 |
| High Quality Materials | Impurity-free woven copper desolder braid construction with 3% no-clean flux provides superior conductivity, even at low temperatures. |
| Fast & Effective Wicking | Unique gap-weave coated solder wick braid absorbs solder quickly like a sponge, reducing the likelihood of overheating and lifted pads. |
| 10ft Super Sized Desolder Spools | 30 Feet of standard width .098" desoldering wick infused with no-clean flux for fast and efficient solder wicking action. |
| Full listing title | SRA Soldering Wick with Flat Woven Copper Desoldering Braid Strip and No Clean Flux for Easy Damage-Free Solder Removal - 3 Pack 10 Foot Solder Wick Spool |
Ready to buy?
SRA Soldering Wick with Flat Woven Copper Desoldering Braid Strip and No Clean Flux for Easy Damage-Free Solder Removal - 3 Pack 10 Foot Solder Wick Spool is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best SSD for Retro PC IDE-to-SATA Builds (Win98, WinXP) in 2026
- Dual GPU Llama.cpp Speedup: What Actually Helps
- Asus ROG Xreal R1 AR glasses pre-orders start today at $849 — 240 Hz virtual gaming at 171 inches on PC…
- Prime Day 2026: Logitech Gaming Mice Drop Up to 47% Off
- Best CPU Cooler for AM5 and LGA1700 Overclocking (2026)
- GameSir G7 SE vs DualSense: Which Controller Is Better on PC in 2026?
- Glide vs OpenGL vs Direct3D: The API War That DirectX 9 Ended
- Windows NT Now Boots on the Nintendo GameCube: What the Homebrew Port Actually Runs
- Best GPUs for 1440p Gaming in 2026
- 180Hz 1440p Gaming Monitors Hit Entry-Level Pricing
- Alienware Area-51 RTX 5090 Gets $2,580 Off — Worth It?
- RTX 5090 Benchmark Comparison: 4K Gaming, AI & Value (2026)
- Is the Ryzen 7 7800X3D Worth It in 2026?
- How to Run a Public Website on a $10 ESP32 Without Servers
- Best Plug-and-Play Retro Game Console in 2026
- Best Internal SSD for Gaming PC Build in 2026
- Period-Correct Win98 Build in 2026: CompactFlash, Drivers, Glide
- DIY Steam Controller Puck Adds Xbox, Switch and PS Emulation Modes
- Asus ROG Harpe II Extreme: 24K-Gold, 65K-Sensor Gaming Mouse
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- Build a Raspberry Pi 4 NAS with a Crucial BX500 SSD in 2026
- Best Retro Gaming Consoles and Controllers to Buy in 2026
- Best SATA SSD for Retro PC Upgrades in 2026
- Ollama on the RTX 3060 12GB: Model Sizes and tok/s for 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090