JDL
JDL ESD Work Gloves
Bottom line: The JDL ESD Work Gloves: Carbon fiber knit dissipates static during PC assembly; main trade-off: medium only in this listing, so sizing options are limited.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Carbon fiber knit dissipates static during PC assembly
- ✓ PU-coated fingertips grip screws and RAM clips
- ✓ Touchscreen-capable, so no glove removal to check a guide
- ✓ CE, EN16350, UKCA and OEKO-TEX 100 certified
Cons
- ✗ Medium only in this listing, so sizing options are limited
- ✗ 13-gauge knit is thin and can snag on case edges
- ✗ PU coating covers fingers only, not the full palm
- ✗ Wash temp capped at 104 F, so no hot sanitizing cycles
SpecPicks Verdict
SpecPicks scored JDL ESD Work Gloves using a rating × review-volume × price-fit model applied to published specs and reviews across the tools & maintenance category. JDL's tools & maintenance lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Anti-static gloves: Pull On closure. Operating touch screen phone or device without removing the working gloves. Dense carbon fiber provide strong anti-static ability, Finger is coated with polyurethane provides maximum grip and accuracy.
- Snug-fitting: 13 gauge seamless knit fingertip PU coating gloves provides bare hand sensitivity and great breathability! Light-weight with good grip! These soft safety work gloves are stretchy and will fits your hands better.
- Multiple occasions: Ideal for electronic products, PC assembly, cellphone repair, jewelry, Laboratory, Clean room. Keeps out dirt and debris. Ergonomically formed to help reduce hand fatigue.
- Washing: Tumble Dry Low. It is recommended to clean gloves with warm water not exceeding 104 ℉ (40 ℃). Mild non ionic laundry soap or detergent should be used. Clean within a cycle time of 5-10 minutes. Rinse with cold water. Tumble dry at a temperature not exceeding 104 ℉ (40 ℃).
- Compliance: CE, EN16350, UKCA, OEKO-TEX, STANDARD 100.
Full Specifications
| Size | Medium |
|---|---|
| Brand | JDL |
| Color | Gray(pack of 6) |
| Fit Type | snug |
| Material | Carbon Fiber |
| Compliance | CE, EN16350, UKCA, OEKO-TEX, STANDARD 100. |
| Model Name | Pc8102 |
| Palm Style | Coated Palm |
| Unit Count | 6 Count |
| Part Number | PC8102 |
| Reusability | Reusable |
| Thumb Style | Wing Thumb |
| Closure Type | Pull On |
| Style Number | PC8102 |
| Compatibility | PC |
| Glove Or Mitt | Glove |
| Is Waterproof | True |
| Palm Material | Polyurethane |
| Item Dimensions | 9.5 x 3.6 x 0.08 inches |
| Number of Items | 6 |
| Full listing title | JDL ESD Work Gloves, Anti-Static Gloves for PC Building, 6 pairs, Computer Installation & Repair, High Resistance Carbon Fiber Gloves, Medium |
Ready to buy?
JDL ESD Work Gloves, Anti-Static Gloves for PC Building, 6 pairs, Computer Installation & Repair, High Resistance Carbon Fiber Gloves, Medium is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Can the RTX 3060 12GB Run Qwen3-27B Locally in 2026?
- Sound Blaster Audigy FX vs Sound BlasterX G6 for Retro Win98/XP Builds
- Intel Arc Pro B60 Gaming Performance: 2025 Benchmarks
- Gunnir Arc B580 vs RTX 5090D on DeepSeek: The Budget AI-Rig Upset Explained
- Best CPU Cooler for Intel Core i7/i9 Builds in 2026
- 2002 GeForce 4 Ti Win98 Build: CompactFlash Storage Done Right
- RTX 3060 12GB vs Arc B580 12GB for Local LLMs in 2026
- Intel Eyed as TSMC Backup by Google and Nvidia for AI Chips
- No GPU Required? Testing Local LLM Inference on the Ryzen 5 5600G iGPU
- Offline Suitcase Robot: Jetson Orin NX SUPER + Gemma 4 E4B
- Best Parts for a Long-Context Local LLM Workstation in 2026
- Local AI Server Build 2026: RAM, VRAM and NVMe for 13B+ Models
- Build an 8-Node Raspberry Pi Cluster for Distributed Computing (2026)
- On-Device AI Keyboards: What a Sub-2GB LLM Needs to Run Local
- IBM Granite 4.1 (3B / 8B / 30B): Local Inference Benchmarks and Hardware Picks
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5070
- Best GPU for gpt-oss 20B in 2026
- Noctua-Style Raspberry Pi 5 NAS Build Goes Viral — What Pi 4 Owners Can Borrow
- DeepSeek Hits the US Entity List: What It Means for Local Inference
- Mac Studio M3 Ultra vs RTX 5090 for AI Inference in 2026
- Ryzen 7 5800X vs 5800X3D for 1440p Gaming: Which Should You Buy?
- Best Game Controllers for PC in 2026
- When Does a Homelab Become a Job?
- Period-Correct 1999 LAN Rig: Pentium III, Voodoo3 3000, Sound Blaster
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090