Ruilogod CF 1.8" to IDE 3.5" 40 Pin Adapter Converter Adaptor
Bottom line: Per its Amazon listing, the Ruilogod CF 1.8" to IDE 3.5" 40 Pin Adapter Converter Adaptor: CF to 3.5" IDE Adapter is for HDD; size: L8.8 x W3.5 x H0.8cm.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ CF to 3.5" IDE Adapter is for HDD.
- ✓ Backed by Ruilogod's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
CF 1.8" to IDE 3.5" 40 Pin Adapter Converter Adaptor1.8" CF hard drive can be detected and used as a regular 3.5" IDE hard drive. Allows you to connect a 1.8" CF hard drive to a 40 Pin IDE cable with this HDD CF to 3.5" IDE Adapter. 4-pin floppy drive power connector. Master / Slave jumper selection available. Bootable CF to 3.5" IDE Adapter supports DOS / Windows / Linux. No driver required. It is recommended to be used for backups or direct data transfers. This is a non-OEM item.
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Ruilogod CF 1.8" to IDE 3.5" 40 Pin Adapter Converter Adaptor, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the storage adapters category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, match it to the drive and the host: the drive interface it takes (SATA, NVMe or other), the drive sizes it accepts, whether it powers a 3.5" drive (desktop drives need 12V, which a USB port alone does not supply), and the USB or PCIe generation of the port you will plug it into, which caps the transfer speed. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- CF to 3.5" IDE Adapter is for HDD.
- One end is CF connector and another end is IDE 40-pin male connector.
- Size: L8.8 x W3.5 x H0.8cm
- Weight: 16.4g
- Package content: 1 x 1.8" CF to 3.5" IDE Adapter
Full Specifications
| Size | L8.8 x W3.5 x H0.8cm |
|---|---|
| Brand | Ruilogod |
| Weight | 16.4g |
| Model Number | ad98fb3cf751db2f152a8b551421c2 |
| Mfr Part Number | b3383b9e-d00e-0190d8e7d34607 |
| Package content | 1 x 1.8" CF to 3.5" IDE Adapter |
Ready to buy?
Ruilogod CF 1.8" to IDE 3.5" 40 Pin Adapter Converter Adaptor is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Storage Adapters
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Audio DSP Firmware for the Raspberry Pi Pico: A 2026 Guide
- Throw a Modern Retro LAN Party in 2026: The Hardware Checklist
- Best Budget 4K Gaming Monitor for an RTX 3060: KOORUI vs Samsung Odyssey
- CompactFlash Boot Drive for Windows 98 Retro PC: The 2026 Transcend CF133 Recipe
- Ryzen 5 5600G vs Ryzen 7 5700X for a 24/7 LLM Server
- Best Raspberry Pi Alternative for Klipper in 2026 (and When the Pi Still Wins)
- Best Storage Kit for Archiving a Physical Game Collection in 2026
- Best Parts for a Local LLM Box That Also Runs Jellyfin in 2026
- Best Uses for Old RAM Sticks in 2025
- Buying Pre-Owned SSDs and HDDs: Good Idea in 2026?
- Acer Nitro 65 Review: Solid Gaming, Connectivity Caveats
- Best Streaming Microphone for Twitch in 2026
- Stable Diffusion WebUI Forge on an RTX 3060 12GB: Setup and Real Throughput
- ComfyUI on an RTX 3060 12GB: Stable Diffusion Throughput in 2026
- Steam Deck Gyro Aiming for FPS Games: A Setup Guide
- Self-Hosting Foundry VTT: Raspberry Pi 4 vs an Old i7-9700K Box
- Best Cooler for the Ryzen 7 5800X: Noctua NH-U12S vs ML240L
- RTX 5090 vs. M5 Max 128GB for Agentic Dev (2026)
- Hackaday Europe 2026: Building a Retro PC From Scratch
- Mistral Medium 3.5 (128B) Local Inference: VRAM, Quants and Tokens/sec
- RTX 5090 AI Cores: What the Specs Actually Mean in 2026
- RTX 5090 vs RTX A6000 for Local LLMs: Speed (5090) or Capacity (A6000)?
- Ryzen 5 5600X vs Ryzen 7 5800X: CPU-Only Qwen2.5 14B (2026)
- Black Friday KVM Switch Deals: 5 Picks for Two-PC Desks
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090