Skip to main content
EZDIY-FAB GPU Power Sleeved Cable Extension, 16pin(12+4) 12VHPWR PCIe 5.0 Connector Male to 3X PCIE 8 PIN for RTX 4070Ti/4080/3090Ti, with Pre-Installed Cable Combs-16AWG/White
EZDIY-FAB

EZDIY-FAB GPU Power Sleeved Cable Extension

Bottom line: The EZDIY-FAB GPU Power Sleeved Cable Extension: 16AWG tinned copper terminals rated to a 600W max output; main trade-off: extension only - cannot be plugged straight into the PSU.

Live pricing on eBay

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ 16AWG tinned copper terminals rated to a 600W max output
  • ✓ Splits one 12VHPWR (12+4) header into 3x PCIe 8-pin PSU cables
  • ✓ Ships with 4 pre-installed cable combs for straight, tidy runs
  • ✓ White sleeving at 19.99 USD suits build-themed cable swaps

Cons

  • ✗ Extension only - cannot be plugged straight into the PSU
  • ✗ Incompatible with 12-pin RTX 30 series cards; 12+4 pin only
  • ✗ EZDIY-FAB advises a 1000W or larger PSU for 4080/3090 Ti
  • ✗ Adds a second connection point between PSU and 12VHPWR header

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for EZDIY-FAB GPU Power Sleeved Cable Extension, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. On the listing's own facts, the case for it is "16AWG tinned copper terminals rated to a 600W max output"; the main trade-off is "Extension only - cannot be plugged straight into the PSU". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Dedicated design for the specs of 12VHPWR PCIe 5.0 Graphics Card, Connect to RTX3090ti GPU without hassle, connecting to PCIe 8 PIN Cable from PSU to get a stable and reliable performance.
  • This cable is only extension cable. Please do not plug it directly into you PSU. Please use a power supply with sufficient power according to the manufacturer's instructions. Generally, it is recommended to use a PSU of 1000W or more to match the graphics card RTX4080/3090ti.
  • The cable material is made of 16AWG tinned copper, and the terminal is made of alloy copper, providing support for a maximum output of 600W, stable performance and safety under high-load use, no frame drop , no screen flickering, and continuous power supply.
  • This 1 to 3x 8 Pin Sleeved extension cable replaces the complex connection configuration of the original 1 to 3x 8 Pin cable, which's configuration is unsightly and unsafe. Use the EZDIY-FAB extension cable, The best solution for safety and aesthetics.
  • Featured with 4 pcs of cable comb, the appearance of the cable is well-organized, allowing you to easily achieve clean cable management and unified design.
  • Please note that the GPU sleeved extension cable is not suitable for 12pin GeForce RTX 30' Series GPU. Only support 12+4pin 4080/3090TI GPU.

Full Specifications

BrandEZDIY-FAB
ColorWhite
Gauge16.0
ModelEZDPR186
Wattage600 watts
Cable TypePCIe
Item ShapeRound
Model NameUS-300MM 16AWG 12+4 to 8in-W
Unit Count1.0 Count
Part NumberEZDPR186
Connector Type12vhpwr, Pcie
Number of Pins40
Maximum Current50 Amps
Maximum Voltage48 Volts
Number of Items1
Special FeatureBraided Cable, Cable Management
Connector GenderMale-to-Female
Compatible DevicesNvidia RTX 4080, Nvidia RTX 3090Ti
Indoor Outdoor UsageIndoor, Outdoor
Customer Package Typesealed anti-static bag
Full listing titleEZDIY-FAB GPU Power Sleeved Cable Extension, 16pin(12+4) 12VHPWR PCIe 5.0 Connector Male to 3X PCIE 8 PIN for RTX 4070Ti/4080/3090Ti, with Pre-Installed Cable Combs-16AWG/White

Ready to buy?

EZDIY-FAB GPU Power Sleeved Cable Extension, 16pin(12+4) 12VHPWR PCIe 5.0 Connector Male to 3X PCIE 8 PIN for RTX 4070Ti/4080/3090Ti, with Pre-Installed Cable Combs-16AWG/White is vintage hardware; the used and vintage market on eBay carries most of the live inventory. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. It also has an Amazon listing — check it for current price and availability. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

See live eBay listings → Check Amazon listing →

Related Power Supplies & Cables

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →