WEP 948DQ-III Fume Extractor Double Filtering
Bottom line: The WEP 948DQ-III Fume Extractor Double Filtering: 2-in-1: 110W soldering station plus fume extractor in one compact unit; main trade-off: short 3.9-inch max effective suction distance.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 2-in-1: 110W soldering station plus fume extractor in one compact unit
- ✓ Double filtering with 8 adsorbers on front and rear intakes
- ✓ PID temp stabilization holds a steady tip temperature
- ✓ Digital LED display with °F/°C switching and readout
- ✓ Kit ready to solder: 3 tips, tip cleaner, holder, 35g solder wire
Cons
- ✗ Short 3.9-inch max effective suction distance
- ✗ 110-127V USA only, will damage on 220V outlets
- ✗ Fan and iron share a chassis, so bench footprint is fixed
- ✗ 10-minute sleep can interrupt longer soldering sessions
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for WEP 948DQ-III Fume Extractor Double Filtering, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. On the listing's own facts, the case for it is "2-in-1: 110W soldering station plus fume extractor in one compact unit"; the main trade-off is "Short 3.9-inch max effective suction distance". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 2-IN-1: The WEP 948DQ-III Fume Extractor & Soldering Station includes a detachable soldering iron, iron holder, tip cleaner, 3 soldering tips, 8 filtration adsorbers, solder wire dispenser, 35g solder wire. Satisfying your need for a solder smoke absorber, and a soldering station.
- Multi-function: This fume extractor can be used as a soldering fan to effectively adsorb harmful particles from the fume generated from soldering. Combining a high performance 110W soldering station into the compact size of a fume extractor. The fume extractor and soldering station come with individual power switches, and you can turn them on individually or together.
- Effective Suction: Maximum effective suction distance is 3.9 inches, and with filtration adsorbers fitted on both the front and rear. The fenders prevent disruptive airflow from impacting effective fume extraction, improving the effective adsorption.
- Soldering Functions: The soldering iron station’s LED digital display provides clear reading and shows parameters include: PID temperature stabilization indicator, °F/°C conversion function, sleep mode (10-minute), and automatic shutdown functions.
- This Fume Extractor & Soldering Station Kit is covered by our exclusive 1-year USA technical support, with 24-hour assistance from our dedicated team. Note: This product is rated for 110-127V USA specifications. Do not connect this iron to a 220V power socket.
Full Specifications
| Brand | WEP |
|---|---|
| Weight | 35g |
| Display | LED |
| Voltage | 110 Volts |
| Wattage | 110 watts |
| Unit Count | 1.0 Count |
| Display Type | LED |
| Model Number | WEP 948DQ-III |
| Item Type Name | Solder Fume Extractor |
| Number of Channels | 1 |
| Included Components | 1*WEP 948DQ-III Fume Extractor; 3*Soldering Tips; 1*35g Solder Wire; 8*Filtration Adsorbers |
| Temperature Stability | 392 to 896 degrees_fahrenheit |
| Item Dimensions D x W x H | 3.54"D x 5.71"W x 6.46"H |
| Global Trade Identification Number | 06974443671421 |
| Full listing title | WEP 948DQ-III Fume Extractor Double Filtering with 110W Soldering Iron Station 2-in-1 Solder Smoke Absorber, with PID Control, ℉/℃, Sleep Mode, Tip Cleaner, 3 Soldering Tips, 35g Solder |
Ready to buy?
WEP 948DQ-III Fume Extractor Double Filtering with 110W Soldering Iron Station 2-in-1 Solder Smoke Absorber, with PID Control, ℉/℃, Sleep Mode, Tip Cleaner, 3 Soldering Tips, 35g Solder is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Why Privacy-Preserving AI Demand Is Rising in the LLM Era
- Turn a Raspberry Pi Pico W Into a Driverless USB WiFi Adapter
- Imaging a Vintage IDE Drive to CompactFlash for a Silent Win98 Boot
- Claude Now Writes 65% of Anthropic's Code: The Local Coding-Rig Angle
- Best GPU for an AI rig in 2026 — the shortlist
- CompactFlash to IDE Adapter Won't Boot on Windows 98: Troubleshooting Guide 2026
- Best Gaming Mouse for Office Productivity Crossover (2026)
- GameNative Unlocks Up to 100 FPS PC Gaming on Android
- Run DeepSeek Locally on a 12GB RTX 3060: 2026 Quant Guide
- DeepSeek V4 Pro at $0.04 a Task: When Local Still Beats the Cloud
- Mouse Wheel Scrolling Wrong Direction? Here's the Fix
- Logitech G29 vs HORI Force Feedback: Best Beginner Sim-Racing Wheel in 2026
- Ryzen 5 5600G vs Ryzen 7 5700X: Best Budget AM4 CPU 2026
- Ternary Text-to-Image: Running Bonsai 4B on a 12GB RTX 3060
- Best GPU for 1440p Gaming Under $300 in 2026
- Llama 3.3 70B: Dual RTX 3060 12GB vs Ryzen 7 5800X CPU Offload (2026)
- Best 4K Monitor for Reviewing AI-Generated Images on an RTX 3060
- llama.cpp vs vLLM for Single-User Local Chat in 2026: Which Wins on a 12GB GPU?
- How to run Qwen 3 14B on NVIDIA GeForce RTX 4090
- Best CPU Cooler for AM4 Ryzen 7 5800X Overclocking Under $100 in 2026
- Best Streaming Setup for Sim Racing in 2026: Cam, Mic, Light
- Homebrew Hardware Mod Gives the NES a Graphics Upgrade
- Kimi K3 Open Weights: What It Takes to Run It Locally
- Best Starter Kit for Learning Robotics on Raspberry Pi (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090