EZDIY-FAB
EZDIY-FAB PCIe 4.0 GPU Mount Bracket with ARGB LED Module
Bottom line: The EZDIY-FAB PCIe 4.0 GPU Mount Bracket with ARGB LED Module: Multi-angle adjustment mounts the GPU vertically or tilted on the PSU shroud; main trade-off: only 3-pin 5V ARGB headers are supported; 12V RGB motherboards cannot drive it.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Multi-angle adjustment mounts the GPU vertically or tilted on the PSU shroud
- ✓ ARGB module syncs with Aura, Mystic Light, and Fusion over a 3-pin motherboard header
- ✓ Gen4 riser cable covers RTX 4090, 4080, 4070 Ti, 30-series, and RX 7000 cards
- ✓ Magnetic base holds the bracket in place on a steel shroud without extra screws
- ✓ Fits most 2- and 3-slot cards, with an all-white cable that matches white builds
Cons
- ✗ Only 3-pin 5V ARGB headers are supported; 12V RGB motherboards cannot drive it
- ✗ Riser length limits chassis fit, so the length spec image needs checking first
- ✗ EZDIY-FAB advises test-fitting the riser on your GPU before final assembly
- ✗ Magnet needs a metal plane; glass or plastic shroud surfaces will not hold it
SpecPicks Verdict
SpecPicks scored EZDIY-FAB PCIe 4.0 GPU Mount Bracket with ARGB LED Module using a rating × review-volume × price-fit model applied to published specs and reviews across the expansion cards category. EZDIY-FAB's expansion cards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for expansion cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Enhance Cooling Efficiency: Adjustable bracket allows mounting of GPU vertically or at an angle for better heat dissipation on PSU shroud or any metal plane
- Synchronized ARGB Lighting: Bracket features ARGB LED lighting effects and can sync with motherboard lighting (AURA, Mystic, Fusion) via M/B 3-Pin ARGB Header; does not support 12V RGB.
- Strong Magnet Base: Equipped with a magnet for stable placement on PSU shroud
- Wide Compatibility: Supports most 2 and 3 slot graphics cards, and made of high-quality metal material for increased structural toughness
- Compatible with Latest Models: Features Gen4 riser cable and compatible with RTX 4090, RTX 4080, RTX 4070ti, RTX 30' Series, and RX70' Series. Prior testing of riser cable onto GPU is recommended. Please refer to length spec image to confirm compatibility with your chassis.
Full Specifications
| Brand | EZDIY-FAB |
|---|---|
| Color | White |
| Model Name | YIHPI333-19 |
| Unit Count | 1 Count |
| Model Number | YIHPI333-19 |
| Mfr Part Number | YIHPI333-19 |
| Video Processor | NVIDIA |
| Graphics RAM Type | GDDR6X |
| Graphics Ram Type | GDDR6X |
| Compatible Devices | Desktop |
| Strong Magnet Base | Equipped with a magnet for stable placement on PSU shroud |
| Wide Compatibility | Supports most 2 and 3 slot graphics cards, and made of high-quality metal material for increased structural toughness |
| Graphics Coprocessor | NVIDIA GeForce RTX 4090 |
| Graphics Description | NVIDIA GeForce RTX 4090 |
| Item Dimensions L x W | 6.3"L x 1.57"W |
| Video Output Interface | PCI Express |
| Graphics Card Interface | PCI Express |
| Display Maximum Resolution | 3840 x 2160 |
| Display Resolution Maximum | 3840x2160 |
| Enhance Cooling Efficiency | Adjustable bracket allows mounting of GPU vertically or at an angle for better heat dissipation on PSU shroud or any metal plane |
| Full listing title | EZDIY-FAB PCIe 4.0 GPU Mount Bracket with ARGB LED Module, Multi-Angle Adjustment with All White Riser Cable, Compatible to RTX4090, 4080, 4070ti - White |
Ready to buy?
EZDIY-FAB PCIe 4.0 GPU Mount Bracket with ARGB LED Module, Multi-Angle Adjustment with All White Riser Cable, Compatible to RTX4090, 4080, 4070ti - White is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Expansion Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Kimi K3 Scores 57 on Intelligence Index at $0.94/Task
- Best Budget CPU for Gaming + Productivity in 2026: The Honest Buying Guide
- Ryzen AI Max+ 'Gorgon Halo' 192GB vs RTX 3060 12GB for Local LLMs (2026)
- Qwen3 Local: RTX 3060 12GB Build vs Mac Mini for Inference
- Steam Deck OLED vs ROG Xbox Ally X: Which Handheld Wins?
- Best CPU for the RTX 3060 12GB (No Bottleneck) in 2026
- Best Parts for a Local RAG Document-QA Workstation in 2026
- DwarfStar Distributed Inference: Splitting a Single LLM Across a Home LAN of Mismatched GPUs
- Samsung 870 EVO vs Crucial BX500: Best SATA SSD 2026
- Jellyfin NVENC Transcodes + a Local LLM on One RTX 3060 12GB
- Best Handheld Gaming PC Under $300 in 2026
- Crucial BX500 vs Samsung 870 EVO: Best 2.5" SATA SSD for a Budget Build
- Intel LLM-Scaler vLLM 1.4 on Arc Pro B70: What the Latest Driver Stack Means for Local Inference
- Period-Correct 2002 LAN Party Build Around an Athlon XP and GeForce 4 Ti
- Logitech G920 vs HORI Racing Wheel: Best Sim Racing Wheel for PS5 & PC
- Ternary Text-to-Image: Running Bonsai 4B on a 12GB RTX 3060
- Best Storage for a Windows 98 Retro PC: CompactFlash vs IDE-to-USB SSD Adapters
- Ryzen 7 5800X vs 5700X for Gaming and Streaming: Which AM4 Chip Wins in 2026?
- DualSense vs GameSir G7 SE for PC Sim Racing: Which Controller Wins in 2026
- Stable Diffusion on Intel Arc vs RTX 3060 12GB: Which Budget GPU Renders Faster?
- NVIDIA Nemotron 3 Ultra: What It Takes to Run Locally
- Ryzen 9 9950X3D vs Core Ultra 9 285K
- Best Mouse Pad for Office Productivity and Long Hours (2026)
- Crucial BX500 vs SanDisk SSD Plus vs WD Blue: Best Budget SATA SSD for a Boot Drive
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090