Skip to main content
Bykski CPU-XPR-I-V3 CPU Water Block for Intel LGA 1851/1700/1200/115x/1366
Bykski

Bykski CPU-XPR-I-V3 CPU Water Block for Intel LGA 1851/1700/1200/115x/1366

Bottom line: Per its Amazon listing, the Bykski CPU-XPR-I-V3 CPU Water Block: COLD PLATE: The nickel-plated T2 copper base is cut with micro-channels just 0.08 mm wide; WHAT HAS TO FIT: The block measures 91.35 x 91.35 x 18.55 mm.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ COLD PLATE: The nickel-plated T2 copper base is cut with micro-channels just 0.08 mm wide
  • ✓ WHAT HAS TO FIT: The block measures 91.35 x 91.35 x 18.55 mm
  • ✓ Backed by Bykski's warranty and support channels

Cons

  • ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
  • ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Bykski CPU-XPR-I-V3 CPU Water Block, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the processors category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for processors of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • FITS: Intel Core 1st to 14th Gen, Core Series 1, Core Ultra 200S, Core HEDT, Xeon E-2400, W-1200/W-1300 and Xeon 6 6300. It mounts on (LGA 1851/1700/1200/115x/1366/2011/2011-3/2066).
  • COLD PLATE: The nickel-plated T2 copper base is cut with micro-channels just 0.08 mm wide. Coolant passes over a large surface right above the CPU and carries heat into your loop fast.
  • MOUNTING: Installation hardware for the Intel sockets ships in the box, with thermal paste included. One block moves between builds, from LGA 1851 and LGA 1700 back to older Intel sockets.
  • WHAT HAS TO FIT: The block measures 91.35 x 91.35 x 18.55 mm, so check room for RAM next to the socket. The G1/4 ports sit 33.56 mm apart for standard fittings.
  • USA SUPPORT, FRIENDLY AND EXPERIENCED: Tyler Direct provides knowledgeable US-based support for troubleshooting and compatibility questions. Every purchase carries a 1-year warranty covering defects.

Benchmark data for other processors

Ready to buy?

Bykski CPU-XPR-I-V3 CPU Water Block for Intel LGA 1851/1700/1200/115x/1366 is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Processors

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →