Skip to main content
InnoGear Mic Stand Tripod Boom Arm Floor Microphone Stand Height Adjustable | Fast Assembly, Carrying Bag Included, Max Height 89.8", Work with Blue Yeti Shure Fifine, Heavy Duty, for Singing Podcast
InnoGear

InnoGear Mic Stand Tripod Boom Arm Floor Microphone Stand Height Adjustable

Bottom line: The InnoGear Mic Stand Tripod Boom Arm Floor Microphone Stand Height ($26.39 on Amazon as of 2026-10-06): Huge 28.1-89.8 in height range covers seated podcasting and standing vocals; main trade-off: at 4.0 lbs total, a heavy condenser on a full-extension boom can still pull it over.

$26.39

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Buy on Amazon — $26.39 Compare to similar streaming gear

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.

Pros & Cons

Pros

  • ✓ Huge 28.1-89.8 in height range covers seated podcasting and standing vocals
  • ✓ Boom arm extends 16-30 in, rotates 360 deg horizontally and 180 deg vertically
  • ✓ Boom detaches so it converts to a straight mic stand with the included clip
  • ✓ 3/8 to 5/8 in metal adapter fits Blue Yeti, SM7B, QuadCast, AT2020, Fifine AM8
  • ✓ Breaks down into a 19.5 x 8.3 in carrying bag for transport between gigs

Cons

  • ✗ At 4.0 lbs total, a heavy condenser on a full-extension boom can still pull it over
  • ✗ Tripod legs need floor clearance a desk-clamp boom arm would not
  • ✗ Knob-tightened joints on a telescoping pole need periodic retightening under load
  • ✗ No shock mount or pop filter included, so budget for those separately

Manufacturer description

The InnoGear Mic Stand Tripod is a floor-standing boom arm setup built for singers, podcasters, and streamers who need real height range without a desk clamp. The steel pole extends from 28.1 inches to 89.8 inches, so you can dial it in for a seated podcast take or raise it over a standing vocalist. The detachable boom arm runs 16 to 30 inches, rotates 360 degrees horizontally and 180 degrees vertically, and pulls off entirely if you want a straight stand with the mic clip attached instead. Compatibility is the reason this InnoGear stand shows up in so many streaming setups. Two mic clips…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored InnoGear Mic Stand Tripod Boom Arm Floor Microphone Stand Height… using a rating × review-volume × price-fit model applied to published specs and reviews across the streaming gear category. InnoGear's streaming gear lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for streaming gear of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

How tall does the InnoGear mic stand actually get?

The stand adjusts from 28.1 inches at its lowest to 89.8 inches fully extended, set by the knobs on the telescoping pole. That top figure includes the pole at full height, so plan boom-arm reach on top of your seated or standing mic position.

Will this hold a Blue Yeti or a Shure SM7B?

Yes. The package includes a metal 3/8 inch to 5/8 inch screw adapter listed as compatible with the Blue Yeti, Snowball, HyperX QuadCast and SoloCast, Shure SM7B, AT2020, and Fifine AM8. Heavier mics sit most securely with the boom arm retracted closer to the pole.

Can I use it as a straight stand without the boom?

Yes. The boom arm is fully detachable. Remove it, attach the mic clip directly to the pole, and you have a straight tripod stand for live vocals or a stage setup.

Is it stable enough that it won't tip over?

InnoGear builds it with thickened steel poles for a 4.0 lb total weight, which the brand positions specifically against lighter stands that tip easily. Extending the 30 inch boom to its full reach shifts the center of gravity, so keep the counterweight over the tripod base.

Does it come with a case, and how well does it pack down?

A carrying bag is included. The stand disassembles into several pieces that fit the 19.5 by 8.3 inch bag, which is small enough for a car trunk or a gear bag. Assembly is tool-free via the same knobs used for height adjustment.

Key Features

  • Adjustable Height & Solid: The height of the microphone stand with boom arm is adjustable from 28.1 inches to 89.8 inches by adjusting the knobs, perfect for people in all age groups. It features upgraded supporting structures for better load-bearing capacity, holding your microphone in position.
  • Steady Tripod Stand: The high-quality thickened steel poles enhance the exceptional stability and durability of this mic stand. Compared to other lighter stands that are easy to tip over, our mic tripod stand is as heavy as 4.0lbs, serving indoor and outdoor use.
  • Flexible & Detachable Boom Arm: The boom arm of the stand is adjustable from 16 inches to 30 inches in length and it can rotate 360° horizontally as well as up to 180° vertically. You can choose the best angle and length of performance by easily adjusting the knobs on the boom arm. Remove the boom arm and attach the mic clip, then you can also use it as a straight mic stand.
  • Portable Carrying Bag: The package comes with a premium carrying bag and the floor mic tripod stand is easy to disassemble into several pieces which allows it to easily pack into the small carrying bag (19.5”×8.3” ) and fit anywhere, easy to transport and store.
  • Wide Compatibility: Two different styles of mic clips in package are compatible with most types of microphones such as Shure SM58, Shure SM48, Shure PGA48, Samson Q2U, ATR2100x-USB, etc. The included metal 3/8” to 5/8” screw adapter is suitable for Blue Yeti, Snowball, Hyper X QuadCast, SoloCast, Shure SM7B, AT2020, Fifine AM8 and more.

Full Specifications

BrandInnoGear
ColorBlack
MaterialAlloy Steel
Set NameInnoGear Microphone Stand Set
Base TypeTripod
Model NameTS186
Unit Count1 Count
Finish TypeSpray Paint
ConnectivityUSB
Model NumberTS186
Material TypeAlloy Steel
Product StyleBoom Arm Mic Stand
Item Type Namemicrophone stand
Maximum Height89.8 inches
Item Dimensions61.42 x 18.7 x 29.92 inches
Body Material TypeAlloy Steel
Included ComponentsTripod Mic Stand, 3/8" to 5/8" Screw Adapter, Mic Holders, Cable Clips, Carrying Bag
Warranty Description12 months.
Manufacturer Part NumberTS186
Item dimensions L x W x H61.42 x 18.7 x 29.92 inches
Full listing titleInnoGear Mic Stand Tripod Boom Arm Floor Microphone Stand Height Adjustable | Fast Assembly, Carrying Bag Included, Max Height 89.8", Work with Blue Yeti Shure Fifine, Heavy Duty, for Singing Podcast

Ready to buy?

InnoGear Mic Stand Tripod Boom Arm Floor Microphone Stand Height Adjustable | Fast Assembly, Carrying Bag Included, Max Height 89.8", Work with Blue Yeti Shure Fifine, Heavy Duty, for Singing Podcast is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $26.39

*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.

Related Streaming Gear

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
InnoGear Mic Stand Tripod Boom Arm Floor Microphone Stand Height Adjustable | Fast Assembly, Carrying Bag Included, Max Height 89.8", Work with Blue Yeti Shure Fifine, Heavy Duty, for Singing Podcast
$26.39
View on Amazon →