MOOKEERF
MOOKEERF BNC Cable 2ft
Bottom line: The MOOKEERF BNC Cable 2ft: Solid copper center conductor, not copper-clad aluminum; main trade-off: 2ft length only; too short for antenna feedline runs.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Solid copper center conductor, not copper-clad aluminum
- ✓ Under 0.15 dB loss at 900 MHz; SWR below 1.15
- ✓ 95%+ shield coverage vs EMI and RFI interference
- ✓ 2.2in heat shrink at each BNC connector resists pull-off
Cons
- ✗ 2ft length only; too short for antenna feedline runs
- ✗ 50 ohm impedance, wrong for 75 ohm video and CCTV gear
- ✗ KMR240 is an LMR240 equivalent, not genuine Times Microwave
- ✗ Thick 240-class jacket bends stiffly in tight bench setups
SpecPicks Verdict
SpecPicks scored MOOKEERF BNC Cable 2ft using a rating × review-volume × price-fit model applied to published specs and reviews across the display & crt accessories category. MOOKEERF's display & crt accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for display & crt accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- ⭐Applications -- This bnc coax cable is widly used for bnc antennas,ham radio,two-way radio,network analyzer,modems,oscilloscopes,spectrum,surveillance,signal generators,attenuator and ect.
- ⭐Low Loss & Low SWR -- The signal loss of this (lmr240 equivalent) kmr240 50 ohm bnc cable 2ft is less than 0.15db on 900MHz.Swr is less than 1.15.It could support better signal transfer with minimum signal loss over large distances and higher frequency use.
- ⭐Well Built Construction -- The inner conductor of this bnc male to bnc male cable is made of solid copper but not copper clad aluminium,and the outer conductor is made of Aluminum foil and tinned copper braid which could maximum protect the signal over large distance.More than 95% shield performance,95% resistance to EMI and RFI.Weatherproof and flexible black PVC jacket allows the cable exposure in outdoor harsh environments.
- ⭐Stronger Connection -- High quality connectors will not pull off,break and lose signal.The length of heat shrink tube that connect the (lmr240 equivalent) kmr240 coaxial cable and bnc connector is upgraded to 2.2",which can better protect the connector from falling off.
- ⭐Professional Produce -- MOOKEERF is a professional manufacturer of RF cable,all our cables are made to the highest standards.If you are not satisfied with any product, please don’t hesitate to contact us,we will serve you our best.
Full Specifications
| Brand | MOOKEERF |
|---|---|
| Color | Black |
| Model | KMR240 |
| Frequency | 900 MHz |
| Cable Type | KMR240 |
| Item Shape | Round |
| Model Name | MOOKEERF BNC Jumper Cable |
| Unit Count | 2 Count |
| Item Length | 2 feet |
| Part Number | KMR240 |
| Connector Type | RF Connector |
| Number of Pins | 4 |
| Outer Material | Aluminum and copper |
| Number of Items | 2 |
| Special Feature | gps |
| Connector Gender | Male-to-Male |
| Compatible Devices | Router |
| Indoor Outdoor Usage | Outdoor |
| Customer Package Type | sealed anti-static bag |
| Compatible Phone Models | No Compatible Phone Models |
| Full listing title | MOOKEERF BNC Cable 2ft,2 Pack Low Loss KMR240 BNC Male to Male Coax Cable 50 Ohm for for Ham Radio, Network Analyzer, Modem, Oscilloscope, Signal Generator, Attenuator |
Ready to buy?
MOOKEERF BNC Cable 2ft,2 Pack Low Loss KMR240 BNC Male to Male Coax Cable 50 Ohm for for Ham Radio, Network Analyzer, Modem, Oscilloscope, Signal Generator, Attenuator is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Display & CRT Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Raspberry Pi Locator Is Shutting Down: How to Find Pi 4 Stock in 2026
- Ryzen 7 5800X vs 5700X for Streaming and Gaming in 2026
- Imaging and Restoring Vintage IDE Drives in 2026: SATA/IDE-to-USB Adapters Compared
- KDE KWin Gaming Patches 2026: Linux Latency vs Windows
- ROG Ally X vs Steam Deck OLED: Specs, Battery, Price (2026)
- NVMe vs SATA for a Steam Library: 970 EVO Plus vs BX500
- Xbox Cloud Gaming in 2025: How It Works & What You Need
- Playnix RX 9060 XT 16GB: A Steam Machine Rival at €1,140
- Best SSD for a PS4 Pro Upgrade in 2026
- Ryzen 7 5800X vs Ryzen 5 5600G for Gaming and Streaming
- Best Cooler for the Ryzen 7 5800X: Noctua NH-U12S vs Cooler Master ML240L
- Old Massive Chieftec Full Tower: Homelab Gem or Junk?
- Cloning a Win98 Voodoo3 Boot Drive: SATA-IDE Adapter Workflow
- Running a Local LLM on a Raspberry Pi 4 Cluster — Realistic Expectations for 2026
- Period-Correct 2001 Pentium III Build: Sound Blaster Audigy Era Synthesis
- Is an RTX 3060 Enough for 4K Gaming? Pairing It With a Budget 4K Monitor
- GPU & CPU Upgrade ROI: Cost-per-FPS Calculator Guide
- Running Qwen 3.6 27B on a Single RTX 3060 12GB: Quantization, Context, and Real Tok/s
- Running Qwen3.5/3.6 with NextN MTP on an RTX 3090 Ti
- Ryzen 7 5800X vs Ryzen 9 3900X: Mistral Small 24B Offload (2026)
- 16% of Freelance Jobs Are Now AI-Doable: The Local Agent Rig That Runs Them
- Claude Code Artifacts Just Shipped: What It Adds, and the Local Aider Alternative
- Best Retro Gaming Storage Adapters for Win98 and DOS PCs in 2026
- Best Capture Setup for Console Streaming in 2026: Elgato Cam Link 4K + PS4 Pro
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090