SUNMON Mic Arm for Microphone
Bottom line: Per its Amazon listing, the SUNMON Mic Arm for Microphone: the stand arm can be extended up to 26.8"/68cm; max support weight is 3 Pound (1.4 KG).
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ The stand arm can be extended up to 26.8"/68cm
- ✓ Max support weight is 3 Pound (1.4 KG)
- ✓ Backed by SUNMON's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for SUNMON Mic Arm for Microphone, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the streaming gear category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, load rating and mounting or device compatibility in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Perfect Mic Stand - Suspension boom arm stand fit your Fifine AM8 suitable, you can easily adjust the mic to the suitable angle or height to show your perfect voice.
- Stability - Mic boom arm is dual suspension springs on each boom arm, protects the Fifine AM8 microphone from shaking, sinking and making noise.
- Mic Boom Arm: Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.8"/4.6cm thick. The stand arm can be extended up to 26.8"/68cm. Max support weight is 3 Pound (1.4 KG).
- Cable Sleeve - Organize your FIFine microphone connection cables to give you a tidier environment to use.
- Package - Included: 1x Fifine AM8 Mic arm, 1x Table mounting clamp,2x Cable Ties. Note: NOT INCLUDED FIFINE MICROPHONE.
- 【Adaptability】- This Mic Arm is also compatible with various models of microphones, For example:HyperX QuadCast, Blue Yeti, HyperX solocast, Shure MV7, Shure SM7B, Fifine K688, Fifine AM8, Rode, Razer Mini, etc.
Full Specifications
| Brand | SUNMON |
|---|---|
| Color | FIFINE XLR/USB Dynamic Microphone Boom Arm |
| Weight | 3 pound |
| Material | Alloy Steel |
| Base Type | C Clamp |
| Finish Type | Painted |
| Model Number | Boom Arm |
| Material Type | Alloy Steel |
| Product Style | Fifine mic |
| Item Type Name | Microphone Boom Arm |
| Maximum Height | 68.1 centimeters |
| Item Dimensions | 15.75 x 4.72 x 1.97 inches |
| Body Material Type | Alloy Steel |
| Package - Included | 1x Fifine AM8 Mic arm, 1x Table mounting clamp,2x Cable Ties. Note: NOT INCLUDED FIFINE MICROPHONE. |
| Included Components | Fifine AM8 Boom Arm, Table mounting clamp, 2x Cable Sleeve |
| Warranty Description | 90 day. |
| Manufacturer Part Number | MPN_SM_M_Stand35_FFAM8_01 |
| Item dimensions L x W x H | 15.75 x 4.72 x 1.97 inches |
| Mount thread size (inches) | 0.63 inches |
| Maximum Weight Recommendation | 1.4 kg |
| Full listing title | SUNMON Mic Arm for Microphone, Boom Arm for Fifine AM8 with Cable Sleeve | Metal Scissor Mic Arm with 3/8'' to 5/8'' Adapter, 2 Cable Sleeve, C Desk Clamp |
Ready to buy?
SUNMON Mic Arm for Microphone, Boom Arm for Fifine AM8 with Cable Sleeve | Metal Scissor Mic Arm with 3/8'' to 5/8'' Adapter, 2 Cable Sleeve, C Desk Clamp is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Streaming Gear
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Raspberry Pi AI HAT+ (26 TOPS): What It Actually Runs in 2026
- Asus ROG Xreal R1: 240Hz AR gaming glasses land
- Qwen3.6-27B at 80 TPS on RTX 5090: Is the Claim Real?
- Best GPU Upgrade From a GTX 1050 Ti for Local LLMs in 2026
- The Best Raspberry Pi Projects for Students in 2026 (With a Real Parts List)
- Lenovo G02 Retro Handheld Reportedly Ships Preloaded With Pirated Games
- Build a Raspberry Pi 4 Pi-hole + Unbound Ad-Blocker in 2026
- gpt-oss 20B on 16GB GPUs: RTX 5060 Ti vs RX 9060 XT vs RTX 4070 Ti Super
- Raspberry Pi 4 8GB vs Pi Zero W: Which Fits Your First Project?
- Best Black Friday Prebuilt Gaming PCs 2026: RTX 5060 to RX 9070 XT
- Pelican-Style Filament Dry Box: The Adafruit Build, Explained
- Sound Blaster vs Aureal Vortex 2: The Positional-Audio War Creative Won
- Best Raspberry Pi Alternative in 2026: Pi vs Orange Pi vs Radxa
- Building a 2003-Era LAN Party Rig: Pentium 4, GeForce FX 5900, Audigy 2 ZS
- Best Racing Wheel Under $300: Logitech G29 vs HORI Force Feedback
- Is the RTX 3060 12GB Still Worth It for 1080p Gaming in 2026?
- Best CPU for a Local-LLM Homelab Under $300 in 2026
- Asus RTX 5060 Near-MSRP Deal Has Expired
- Sega's $5M Bet Saved Nvidia in 1996 — Jensen Heads to Tokyo
- Raspberry Pi AI HAT+ 26 TOPS: Specs, Setup, and Verdict
- Mystery N64 Cartridge Found in the Woods Boots Up
- AMD Instinct MI300X vs Consumer GPUs: What Local AI Builders Should Buy in 2026
- LG UltraGear 52G930B 52-Inch 5K Gaming Monitor Review
- NVIDIA Bankrolls AI Startups to Tighten Its Chip Grip
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090