Skip to main content
iUniker PD USB-C 27W Power Supply for Raspberry Pi 5, Cable Length 47 inch 5.1V 5A GaN PD 27W Power Supply for Raspberry Pi 5 16GB/8GB/4GB/2GB (ETL Listed)
iUniker

iUniker PD USB-C 27W Power Supply for Raspberry Pi 5

Status: iUniker PD USB-C 27W Power Supply for Raspberry…: Unavailable on Amazon as of . SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.

Bottom line: The iUniker PD USB-C 27W Power Supply for Raspberry Pi 5: Full 5.1V/5A output delivers the 27W Pi 5 needs to avoid low-power throttle warnings; main trade-off: US plug only — needs an adapter for UK/EU/AU outlets.

Unavailable on Amazon as of

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Currently unavailable on Amazon. Not the same product — 3 in-stock alternatives:

Similar: RasTech for Raspberry Pi 5 GaN PD 27W Power… — $12.34 on Amazon as of 2026-10-25 10:13 UTC (price may vary).

Similar: GeeekPi 27W Power Supply for Raspberry Pi 5 — $12.99 on Amazon as of 2026-10-25 10:13 UTC (price may vary).

Similar: Smraza 5.1V 3A Power Supply Compatible with… — $8.99 on Amazon as of 2026-10-25 10:13 UTC (price may vary).

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ Full 5.1V/5A output delivers the 27W Pi 5 needs to avoid low-power throttle warnings
  • ✓ GaN internals stay small and run cooler than standard switching bricks
  • ✓ 47-inch (120cm) 18AWG cable reaches high shelves and clears bulky cases
  • ✓ ETL Listed with over-voltage, over-current, and short-circuit protection

Cons

  • ✗ US plug only — needs an adapter for UK/EU/AU outlets
  • ✗ Captive hardwired cable can't be swapped if it wears or fails
  • ✗ Extra PD profiles (9V/12V/15V) are wasted on a Pi-only supply
  • ✗ No inline on/off switch — unplug to power-cycle the board

Manufacturer description

About this item 【Compatibility】Compatible with Raspberry Pi 5 4GB/8GB, Raspberry Pi 5 Power Supply USB-C PD 27W GaN Power Adapter 【Powered by GaN】Powered by GaN Technology: GaN technology makes our power supply smaller without sacrificing a drop of power and work with low temp and more stable 【Input】100 – 240V AC, 50/60HZ 0.8A Max; Connector: USB-C; Cable: 120cm(47 inch) 18AWG 【Output】5.1V/5A, 9V/3A, 12V/2.25A, 15V/1.8A 【Protection】With over voltage, over current short circuit protection 【Package Include】1 x GaN PD 27W Power Adapter for Raspberry Pi 5(US PLUG) › See more product details

SpecPicks Verdict

SpecPicks scored iUniker PD USB-C 27W Power Supply for Raspberry Pi 5 using a rating × review-volume × price-fit model applied to published specs and reviews across the single-board computers category. iUniker's single-board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for single-board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

  • 【Compatibility】Compatible with Raspberry Pi 5 4GB/8GB, Raspberry Pi 5 Power Supply USB-C PD 27W GaN Power Adapter
  • 【Powered by GaN】Powered by GaN Technology GaN technology makes our power supply smaller without sacrificing a drop of power and work with low temp and more stable
  • 【Input】100 – 240V AC, 50/60HZ 0.8A Max; Connector USB-C; Cable 120cm(47 inch) 18AWG
  • 【Output】5.1V/5A, 9V/3A, 12V/2.25A, 15V/1.8A
  • 【Protection】With over voltage, over current short circuit protection
  • 【Package Include】1 x GaN PD 27W Power Adapter for Raspberry Pi 5(US PLUG)

Full Specifications

ASINB0CQLNP9DZ
BrandiUniker
ColorWhite
Wattage27 watts
Amperage5 Amps
PortableNo
Power PlugType C
Unit Count1.0 Count
ManufactureriUniker
Model NumberXS-GaN-27W USB-C Power Supply US
Power SourceCorded Electric
Input Voltage110 Volts
Mounting TypeWall Mount
Built-In MediaBlu-ray
Connector TypeUSB Type C
Output Current5 Amps
Output Voltage5.1 Volts
Number of Items1
Special FeatureCharging Indicator, Fast Charging, Lightweight Design, Short Circuit Protection
Total USB Ports1
Full listing titleiUniker PD USB-C 27W Power Supply for Raspberry Pi 5, Cable Length 47 inch 5.1V 5A GaN PD 27W Power Supply for Raspberry Pi 5 16GB/8GB/4GB/2GB (ETL Listed)

Hardware benchmark data

Ready to buy?

Amazon shows no buyable offer for iUniker PD USB-C 27W Power Supply for Raspberry… at the last check. A similar in-stock product is RasTech for Raspberry Pi 5 GaN PD 27W Power…. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

View Similar — $12.34

Related Single-Board Computers

iUniker PD USB-C 27W Power Supply for Raspberry… head-to-head

Side-by-side specs, prices, and a pick for each matchup — no tab-switching.

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →