Skip to main content
WORKPRO 6" Mini Bar Clamps for Woodworking, One-Handed Clamp/Spreader, Wood Clamps Set, Screw Change F Clamps with 50LBS Load Limit, 4 Pack
WORKPRO

WORKPRO 6" Mini Bar Clamps for Woodworking

Bottom line: The WORKPRO 6" Mini Bar Clamps for Woodworking: Four 6" mini F clamps per pack for multi-point clamping on small glue-ups; main trade-off: 50 lbs max clamping force is too light for panel or heavy edge glue-ups.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For projectors, gaming displays and video upscalers, synthesises manufacturer specs against measured reviews (ProjectorCentral, RTINGS), treating non-ANSI "lumen" figures as marketing claims rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference. How we check display specs →

Pros & Cons

Pros

  • ✓ Four 6" mini F clamps per pack for multi-point clamping on small glue-ups
  • ✓ Converts to a spreader with a 9-3/8" max opening by reversing the jaw
  • ✓ Quick-release trigger allows one-handed positioning and removal
  • ✓ 1-1/2" throat depth sized for model parts and precision woodworking

Cons

  • ✗ 50 lbs max clamping force is too light for panel or heavy edge glue-ups
  • ✗ 1-1/2" throat depth cannot reach far in from a workpiece edge
  • ✗ Listing states spreader opening only; max clamping opening is not specified
  • ✗ Spreader mode requires loosening a screw and remounting the jaw

Manufacturer description

The WORKPRO 6" Mini Bar Clamps set gives you four compact F clamps built for small glue-ups, model builds, and detail work where full-size bar clamps get in the way. Each clamp has a 1-1/2" throat depth and up to 50 lbs of clamping force. That is enough to hold small parts steady without overpowering delicate stock. The quick-release trigger lets you slide the jaw into place and lock it with one hand. Your other hand stays free to line up the workpiece. This helps most when you move clamps often or take parts in and out between steps. Need to push instead of pull? Loosen the screw, reverse…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for WORKPRO 6" Mini Bar Clamps for Woodworking, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the displays & upscalers category before committing. On the listing's own facts, the case for it is "Four 6" mini F clamps per pack for multi-point clamping on small glue-ups"; the main trade-off is "50 lbs max clamping force is too light for panel or heavy edge glue-ups". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

How much clamping force do the WORKPRO 6 inch mini bar clamps have?

Each clamp delivers up to 50 lbs of clamping force. That suits small parts, model work, and light glue-ups, not large panels or heavy stock.

Can these clamps be used as spreaders?

Yes. Loosen the screw, reverse the jaw, and mount it on the other side of the bar to turn the clamp into a spreader. In spreader mode the maximum opening is 9-3/8".

What is the throat depth of these mini F clamps?

The throat depth is 1-1/2", so the clamps can press up to 1-1/2" in from the edge of a workpiece.

How many clamps come in the pack, and can I operate them with one hand?

The set includes 4 clamps. Each has a quick-release trigger, so you can position, tighten, and release it with one hand.

Do the WORKPRO mini bar clamps come with a warranty?

The product details don't list warranty terms. Check the current Amazon listing or contact WORKPRO for coverage.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • 6" Mini F Clamp: The Bar clamp set includes 4 pack 6" mini clamps, the maximum opening size of the spreader is 9-3/8", and the throat depth is 1-1/2"
  • Clamp & Spreader: The screw converts the clamp into a spreader. Just loosen the screw, reverse the clamp, and install it on the other side of the track and you have a spreader
  • Quick Release: The quick-release trigger is a convenient tool, especially when frequent adjustments to the clamping position are needed or when quick removal or clamping of workpieces is required, catering to various workpiece needs. It simplifies operation and can be easily manipulated with just one hand
  • Suitable for Fine Workpieces: The mini f clamp is perfect for clamping fine workpieces, such as small parts in modeling or detailed parts in precision woodworking projects
  • Durable: With up to 50 lbs of clamping force, which makes it effective in clamping small objects. At the same time, its sturdiness assures long-lasting use and high stability, ensuring that the object being clamped will not easily slide or move

Full Specifications

BrandWORKPRO
ColorBlue
StyleIndustrial
Set NameWood Clamps Set (4 Piece)
Style NameIndustrial
Unit Count4 Count
6" Mini F ClampThe Bar clamp set includes 4 pack 6" mini clamps, the maximum opening size of the spreader is 9-3/8", and the throat depth is 1-1/2"
Number of Items4
Number of Packs4
Tensile Strength50 pounds
Manufacturer Part NumberW001427
Suitable for Fine WorkpiecesThe mini f clamp is perfect for clamping fine workpieces, such as small parts in modeling or detailed parts in precision woodworking projects
Global Trade Identification Number00820909603450
Full listing titleWORKPRO 6" Mini Bar Clamps for Woodworking, One-Handed Clamp/Spreader, Wood Clamps Set, Screw Change F Clamps with 50LBS Load Limit, 4 Pack

Ready to buy?

WORKPRO 6" Mini Bar Clamps for Woodworking, One-Handed Clamp/Spreader, Wood Clamps Set, Screw Change F Clamps with 50LBS Load Limit, 4 Pack is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →