QIANRENON USB2.0 Printer Sharer Switcher 2 Port USB B Print Selector Switch Adapter
Bottom line: The QIANRENON USB2.0 Printer Sharer Switcher 2 Port USB B Print Selector: Shares 1 printer between 2 computers over USB 2.0; main trade-off: manual button switching only, no auto-sensing.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Shares 1 printer between 2 computers over USB 2.0
- ✓ Ships with two 1.5m USB-A to USB-B cables included
- ✓ Per-port LED shows which computer is connected
- ✓ Plug and play, no drivers or external power needed
Cons
- ✗ Manual button switching only, no auto-sensing
- ✗ Two ports max, cannot share among 3+ computers
- ✗ USB 2.0 speeds only, dated for large print jobs
- ✗ Short 1.5m cables limit computer placement
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for QIANRENON USB2.0 Printer Sharer Switcher 2 Port USB B Print Selector…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. On the listing's own facts, the case for it is "Shares 1 printer between 2 computers over USB 2.0"; the main trade-off is "Manual button switching only, no auto-sensing". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【Shared Print】USB print switcher switch box, connect 2 computers, share 1 printer, easy to improve office efficiency.
- 【2 USB 2.0 to USB B cables】USB B printer sharing switch adapter. Comes with 2 x 1.5m long print cables for the adapter to connect to 2 computers.
- 【Manual Switching】USB printer sharing switch 2 to 1 switcher. Press the button to switch printing back and forth between 2 computers.
- 【LED Indicator Lights】2 in 1 USB printer sharing adapter. Each of the 2 computer input ports has an LED indicator, allowing you to easily identify the computer that is connecting to the printer.
- 【Plug and Play】2 port USB2.0 printer sharing switch box. Built in high performance host controller chip, plug and play, no need for installation and external power supply. Support Windows XP, Win 7/8/10/ista, MacOS common system.
Full Specifications
| Brand | QIANRENON |
|---|---|
| Color | Black |
| Material | Plastic |
| Terminal | Physical |
| Unit Count | 1 Count |
| Part Number | 21559 |
| Switch Type | Push Button |
| Circuit Type | 2-way |
| Connectivity | USB |
| Contact Type | Normally Open |
| Control Type | Manual |
| Actuator Type | Push Button |
| Compatibility | Switch, Mac |
| Material Type | Plastic |
| Mounting Type | Tabletop |
| Connector Type | Usb-b |
| Control Method | Touch |
| Operation Mode | MANUAL |
| Controller Type | Push Button |
| Number of Items | 1 |
| Full listing title | QIANRENON USB2.0 Printer Sharer Switcher 2 Port USB B Print Selector Switch Adapter, 2 Computer Share 1 Printer Manual Switcher, with LED Light, Including 2 * 1.5m Print Cable |
Ready to buy?
QIANRENON USB2.0 Printer Sharer Switcher 2 Port USB B Print Selector Switch Adapter, 2 Computer Share 1 Printer Manual Switcher, with LED Light, Including 2 * 1.5m Print Cable is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Best SATA SSD to Upgrade Your PS4 Pro in 2026
- SteamOS Boots on Intel Hardware: Enthusiast Hack Lands
- AMD Ryzen 7 5800X3D Re-Review Shows DDR4 Still Has Gaming Legs in 2026
- Period-Correct Windows 98 Boot Drive: CompactFlash vs IDE SSD
- Build a Jellyfin Home Media Server on a Raspberry Pi 4 (8GB) in 2026
- Turtle Beach Recon 50 in 2026: Is the $40 Gaming Headset Still Worth It?
- Is 8GB RAM Enough in 2026? A Real-World Performance Analysis
- Building a CompactFlash Boot Drive for a Windows 98 Retro PC
- CompactFlash vs SATA-to-IDE: The Best Silent Boot Drive for a Win98 PC
- How to run Llama 3.1 70B on Apple M4 Max
- Gemini-SQL2 Tops Text-to-SQL — Can a 12GB RTX 3060 Run Local SQL Models Instead?
- Jan.ai vs LM Studio vs Ollama: Easiest Local-LLM App for a 12GB Card in 2026
- Best SSD for a Retro PC Build: CompactFlash vs SATA in 2026
- Ryzen 7 5700X vs Intel Core i7-9700K: Best Budget Streaming + Gaming CPU in 2026
- Building a CompactFlash-Boot Win98 SE Retro PC: 2026 Workflow
- Raspberry Pi 5 IOMMU Driver Heads to the Mainline Linux Kernel
- vLLM vs llama.cpp on a 12GB GPU: Which Serves Local LLMs Faster?
- Why You Shouldn't Leave the Default Model on Copilot or Gemini
- Best 8GB GPU for Local LLMs in 2026
- Running a 26B LLM Locally With No GPU: The CPU Setup Guide
- Imaging a Vintage IDE Drive to CompactFlash for a Silent Win98 Boot
- Best Beginner Racing Wheel in 2026: Logitech G920 vs HORI Racing Wheel Overdrive
- Samsung's 256GB microSD Falls to $47.99 — Plus the SSD Sidegrade
- GeForce Tensor-Throttle Unlock: RTX 3060 12GB vs RTX 4090 for Local LLMs
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090