Skip to main content
LINKUP PCIe 5.0 Riser Cable | Vertical GPU Mount | Right Angle, 10cm
LINKUP

LINKUP PCIe 5.0 Riser Cable | Vertical GPU Mount | Right Angle, 10cm

Mike Perry has researched PC hardware since 2014, tracking 80+ GPU generations, 50+ retro handheld platforms, and 30+ vintage PC configurations. He synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

$49.96

As an Amazon Associate, SpecPicks earns from qualifying purchases.

*Price sourced from Amazon.com. Last updated 2026-09-05. Price and availability subject to change.

Bottom line: The LINKUP PCIe 5.0 Riser Cable | Vertical GPU Mount | Right Angle, 10cm is a niche pick — read recent reviews before buying in the expansion cards category, priced around $49.96. Compare close alternatives before committing.

Verified Compatibility — Built for vertical GPU mount and standard layouts across towers, SFF/ITX sandwich cases, open benches, and water-cooled rigs. Fully backward-compatible with PCIe 4.0 and validated on ASUS WS WRX80SE WiFi II and WRX90E Gen5 boards. Ready for next-gen cards like RTX 5090 and RX 9070. Use this PCIe 5.0 riser cable to place the GPU exactly where airflow and aesthetics demand—without giving up stability. Gen5 x16 Performance & Shielding — Delivers full 128GB/s on PCIe 5.0 x16 with tuned impedance, premium conductors, and multilayer shielding to suppress crosstalk and EMI…

SpecPicks Verdict

SpecPicks scored LINKUP PCIe 5.0 Riser Cable | Vertical GPU Mount | Right Angle, 10cm using a rating × review-volume × price-fit model applied to our editorial and benchmark analysis across the expansion cards category. LINKUP's expansion cards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Mixed or limited buyer feedback at this price point — focus your evaluation on recent reviews that specifically address build quality and long-term reliability, and shortlist one or two close alternatives before deciding.

Common buyer scenarios for expansion cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the Amazon listing before purchase. Prices, stock, and Prime eligibility update directly from Amazon's catalog and may have moved since this page was last verified.

Pros & Cons

Pros

  • ✓ Backed by LINKUP's warranty and support channels
  • ✓ Ships via Amazon with Prime eligibility and the standard returns policy

Cons

  • ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
  • ✗ Price, stock, and Prime eligibility update from Amazon and may have changed since this page was last verified

Key Features

  • Verified Compatibility — Built for vertical GPU mount and standard layouts across towers, SFF/ITX sandwich cases, open benches, and water-cooled rigs. Fully backward-compatible with PCIe 4.0 and validated on ASUS WS WRX80SE WiFi II and WRX90E Gen5 boards. Ready for next-gen cards like RTX 5090 and RX 9070. Use this PCIe 5.0 riser cable to place the GPU exactly where airflow and aesthetics demand—without giving up stability.
  • Gen5 x16 Performance & Shielding — Delivers full 128GB/s on PCIe 5.0 x16 with tuned impedance, premium conductors, and multilayer shielding to suppress crosstalk and EMI. The AVA design targets clean eye margins under load and tight bends, making it a dependable PCIe Gen5 riser cable for high-FPS gaming, AI, and storage workflows. Replace Gen 3 and Gen 4 PCIe cables while preserving upgrade headroom for future GPUs.
  • Showcase Aesthetics, Improve Cooling — Move the card where it breathes. A vertical mount GPU clears intake for thick shrouds & radiators, reducing heat soak & noise while giving builds a clean, gallery-style look. Route like a tidy GPU extension cable & keep clocks steady thanks to robust shielding & low-loss geometry. Builders report good quality & that it simply works great when paired with the right bracket and case layout. View Product Description to ensure Compatibility with your PC case.
  • Installation Instructions — Measure with a string from the motherboard slot to the GPU PCB to pick the correct span. Seat connectors fully until latched; Fold & Flex in any way. Use standoffs and support brackets if the chassis requires it. If fit seems tight, contact us before forcing parts—we’ll advise the best path for your case model. Clear guidance turns this into a straightforward PCIe cable install, even in cramped ITX routes.
  • Choose the right Cable — Choose a length between 2–35.4 inches (see Installation Instruction) and the connector you need: right angle, straight, left angle, double reverse, single reverse right, single reverse left, or single reverse straight. One family covers ITX sandwiches, server trays, and vertical displays. Consistent Gen5 signal integrity across sizes makes it a flexible PCIe extender or GPU riser cable for clean cable management today with room to evolve tomorrow.

Full Specifications

Size10cm - v2
BrandLINKUP
ColorAll Black
ModelAG-P5-33SR-010BK
UnitCount1
ManufacturerLINKUP Technology Inc.
ItemPartNumberAG-P5-33SR-010BK

Ready to buy?

LINKUP PCIe 5.0 Riser Cable | Vertical GPU Mount | Right Angle, 10cm is sold on the used and vintage market, where eBay carries the live inventory — Amazon does not stock this part. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

See live eBay listings →

*Price sourced from Amazon.com. Last updated 2026-09-05. Price and availability subject to change.

Related Expansion Cards

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →