TUMMASTER ARGB Fan HUB
Bottom line: The TUMMASTER ARGB Fan HUB: 10 ARGB fan headers off one hub, so a full custom loop build runs from a single SATA lead; main trade-off: 5V 3-pin ARGB only, so 12V 4-pin RGB fans will not work and risk damage if plugged in.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 10 ARGB fan headers off one hub, so a full custom loop build runs from a single SATA lead
- ✓ Magnetic base sticks to the case tray without screws or double-sided tape
- ✓ RF remote plus a chassis-mounted key, so lighting changes need no motherboard software
- ✓ SATA power input pulls fan current off the board header instead of overloading it
Cons
- ✗ 5V 3-pin ARGB only, so 12V 4-pin RGB fans will not work and risk damage if plugged in
- ✗ Plug direction matters, and a reversed 5V connector can kill the attached device
- ✗ No motherboard sync listed, so lighting runs independent of Aura, Mystic Light, or RGB Fusion
- ✗ Product listing gives no warranty terms, cable length, or PWM channel detail
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for TUMMASTER ARGB Fan HUB, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. On the listing's own facts, the case for it is "10 ARGB fan headers off one hub, so a full custom loop build runs from a single SATA lead"; the main trade-off is "5V 3-pin ARGB only, so 12V 4-pin RGB fans will not work and risk damage if plugged in". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【ARGB Lighting】Support ARGB fan, ARGB light bar, etc., and synchronize the light efficiency of 5V 3pin interface equipment. (Note: the + 12V 4Pin RGB interface device is not supported! Do not insert! Please pay attention to the arrow marked on the ARGB equipment plug and insert it in the direction of 5V. If the insertion direction is wrong, there is a risk of damaging the equipment.)
Full Specifications
| Brand | TUMMASTER |
|---|---|
| Color | J-10 (Black) |
| Model | J-10 |
| Voltage | 12 volts, 5 volts |
| Material | Plastic |
| Unit Count | 1 Count |
| Part Number | J-10 |
| Display Type | LED |
| Compatibility | PC |
| Material Type | Plastic |
| Item Dimensions L x W x H | 3.83"L x 2.33"W x 0.6"H |
| Full listing title | ARGB Fan HUB, 10-Port 4 Pin PC Fan Controller, 5V-3Pin ARGB Fan Hub, Magnetic Suction, SATA Power Input,RF Remote & Chassis key control,Controller Support 10 ARGB PWM Fans Splitter, Black |
Ready to buy?
ARGB Fan HUB, 10-Port 4 Pin PC Fan Controller, 5V-3Pin ARGB Fan Hub, Magnetic Suction, SATA Power Input,RF Remote & Chassis key control,Controller Support 10 ARGB PWM Fans Splitter, Black is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Local LLM Parts to Buy Before the 2026 Memory Spike
- Gemma 4 31B Uncensored on a 12GB RTX 3060: What Fits, How Fast
- SteamOS Boots on Intel: Enthusiast Hack Breaks Valve's AMD-Only Grip
- On-Device AI Keyboards: Can an RTX 3060 12GB Train the Model?
- Ling 2.6 1T on Local Hardware: Can You Actually Run a Trillion-Parameter Model at Home in 2026?
- Mac Mini M4 vs RTX 3060 12GB for Local LLMs: Which Actually Wins?
- Best Microphone for Streaming and Podcasting Under $200 in 2026
- Samsung Winds Down Chip Output Before Strike — Brace for SSD Prices
- LG UltraGear 52G930B 52-inch 5K gaming monitor review: Extreme in every respect
- Best Quiet PC Cooling Upgrades in 2026
- AMD Revives Zen 2: Ryzen 7 4700LE in $800 RTX 3050 Prebuilts
- Best Budget Gaming Monitors Under $300 for 1080p in 2026
- RTX 3060 12GB vs RX 7600 XT for Local LLMs: The Cheap Inference Card to Buy in 2026
- CompactFlash as a Boot Disk: A Silent, Reliable Drive for Your Win98 Retro Rig
- Best CPU Cooler for AMD Ryzen 7 5800X High-TDP Builds (2026)
- Samsung Winds Down Memory Output Before 18-Day Strike — SSD Price Watch
- Raspberry Pi AI HAT+ Hits 26 TOPS for On-Device Inference
- PCIe Gen2/Gen3 1:2 Analog MUX: Practical Maker Implementation
- Raspberry Pi 4 8GB vs Ryzen 5 5600G: Which Homelab Box Wins in 2026?
- Crucial BX500 vs Samsung 870 EVO: Best 2.5" SATA SSD for a Budget Build
- Build a RetroPie Handheld with the Raspberry Pi Zero W in 2026: Full BOM + Setup
- Best Streaming Gear for New Creators in 2026
- Building a Period-Correct 1999 Quake III Arena LAN Rig: Voodoo3, Pentium III, and Win98 SE
- Gemma 4 Stealth Update Fixes Tool Calling: What Changes Locally
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090