Alinan
Alinan 4pcs 8010 80mm x 10mm 24V Dual Ball Bearings Brushless Fan 2Pin DC Cooling Exhaust Fan for Radiator DIY Air Exhaust Vent Cooling
Bottom line: The Alinan 4pcs 8010 80mm x 10mm 24V Dual Ball Bearings Brushless Fan is a specs-and-price decision rather than a crowd-consensus one in the retro cpu coolers & fans category, priced around $10.99 on Amazon as of 2026-10-06. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Backed by Alinan's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Features:Bearing Type: Dual ball bearingsDimensions: 80x80x10mm/3.0 x 3.0 x 0.4inchVoltage: DC 24VCurrent: 0.1AmpPower: 1.5WattSpeed: 2200RPMAirflow: 15CFMNoise: 22dBAConnector: XH2.54-2 pinRated Speed: 2800 RPMAir Flow: 20.06CFMWire Length: 15cm/5.9inchSuitable for hot end cooling, 3D printers hotend, computer, humidifier or other cooling requirements
SpecPicks Verdict
SpecPicks scored Alinan 4pcs 8010 80mm x 10mm 24V Dual Ball Bearings Brushless Fan… using a rating × review-volume × price-fit model applied to published specs and reviews across the retro cpu coolers & fans category. Alinan's retro cpu coolers & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Dimensions: 80x80x10mm/3.0 x 3.0 x 0.4inch; Voltage: DC 24V; Current: 0.1Amp; Power: 1.5Watt; Speed: 2800RPM; Air Flow: 20.06CFM; Noise: 22dBA, wire length is 15cm.
- High quality dual ball bearings, more stable and Long life, suitable for continuous work. 24V 8010 fan is best for cooling the hottest and narrow spaces, circulating and exhausting stuffy air.
- Computer and peripherals, graphics card peripheral cooling, cooling base fan, designed for projects that requires cooling or ventilation or as an replacement fan for various products , allows the fans to be laid flat or stand upright.
- Blow warm air out of the case , draw cool air into your case, push the hot air out of your computer when mounted on the back or draw in fresh air if you mount it at the front of the case
- Widlly suit for hot end cooling, 3D printers hotend, computer, humidifier or other cooling requirements.
Full Specifications
| Brand | Alinan |
|---|---|
| Model | others |
| Voltage | 24 Volts (DC) |
| Wattage | 1.5 watts |
| Dimensions | 80x80x10mm |
| Unit Count | 4.0 Count |
| Noise Level | 1 Sones |
| Part Number | others |
| Cooling Method | others |
| Number of Items | 4 |
| Air Flow Capacity | 20.06 Cubic Feet Per Minute |
| Compatible Devices | others |
| Included Components | others |
| Power Connector Type | 2-Pin |
| Maximum Rotational Speed | 1 RPM |
Ready to buy?
Alinan 4pcs 8010 80mm x 10mm 24V Dual Ball Bearings Brushless Fan 2Pin DC Cooling Exhaust Fan for Radiator DIY Air Exhaust Vent Cooling is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Intel Arc A770 16GB for Local LLMs: 2025–2026 Guide
- Do you need a shifter for sim racing? Logitech G29 + Thrustmaster TH8A
- Best GPU for Local LLMs Under $400 in 2026
- A New Benchmark Says AI Fails at Real Knowledge Work — Does a Bigger Local Rig Help?
- Genesis Mini vs SNES Classic vs Raspberry Pi 4: Which Retro Setup Wins in 2026?
- Run Text-to-SQL Locally on a 12GB GPU After Gemini-SQL2
- Intel Arc B580 LLM Inference: 12GB Battlemage Benchmarks
- Best GPU for a Homelab in 2026: AI, VMs & Budget Picks
- Best Controller for Raspberry Pi Retro Gaming and Emulation in 2026
- Intel Arc A770 LLM Performance: Local Inference Guide
- How Much VRAM Does 32k Context Use on an RTX 3060 12GB? (2026)
- Build a Silent Windows 98 Gaming PC With a CompactFlash IDE Drive
- Best Mid-Range Gaming CPU (2026)
- llama.cpp Vulkan on the RTX 3060 12GB: Setup and Measured tok/s for 2026
- Best Budget 4K Monitor for an RTX 3060 Build in 2026: SANSUI vs KOORUI vs ASUS TUF
- Best 1440p Monitor for the RTX 3060 12GB (2026)
- Glide on Modern PCs: dgVoodoo2 + nGlide for 3dfx-Era Games (2026)
- Inside the Creative Katana V2X Soundbar Teardown — and What It Says About Sound Blaster
- Best Controller for Sim Racing Beginners on PC in 2026
- CompactFlash to IDE: Period-Correct Silent Storage for Win98 Builds
- AIO vs Air on a Ryzen 7 5800X: Corsair ML240L vs Noctua NH-U12S
- Best X870E Motherboards for the Ryzen 7 9800X3D in 2026
- Watercooled Gaming/Networking Rack: 2025 Build Guide
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 3090
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090