ALSEYE Rams2.0 Mid Tower PC Case Micro-ATX/ITX MATX Tempered Glass Side Panel
Bottom line: The ALSEYE Rams2.0 Mid Tower PC Case Micro-ATX/ITX MATX Tempered Glass is a Micro-ATX mid-tower case with a tempered-glass side panel; it fits graphics cards up to 305mm long and CPU coolers up to 180mm tall (manufacturer spec).
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Fits graphics cards up to 305mm long and CPU air coolers up to 180mm tall (manufacturer spec)
- ✓ Room for up to 6 fans
Cons
- ✗ 305mm GPU clearance rules out some of the longest triple-fan cards, a few of which run past 350mm; check your card's length
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for ALSEYE Rams2.0 Mid Tower PC Case Micro-ATX/ITX MATX Tempered Glass…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the pc cases category before committing. On the listing's own facts, the case for it is "Fits graphics cards up to 305mm long and CPU air coolers up to 180mm tall (manufacturer spec)"; the main trade-off is "305mm GPU clearance rules out some of the longest triple-fan cards, a few of which run past 350mm; check your card's length". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for pc cases of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Stunning Side View & ARGB Control: Features a premium full tempered glass side panel to showcase your build and includes a convenient ARGB control button for easy lighting customization.
- Optimized Cooling with Dust Protection: Supports up to 6x 120mm fans (2 Front, 2 Top, 2 Bottom, 1 Rear) and a top-mounted 240mm radiator. Equipped with dust filters on key intakes to keep your system clean.
- Spacious Hardware Compatibility: Accommodates Micro-ATX and ITX motherboards. Fits large CPU coolers (up to 180mm), lengthy graphics cards (up to 305mm), and standard power supplies (up to 160mm deep).
- Streamlined Storage & Essential I/O: Dedicated mounts for one SSD and one HDD. Front panel provides easy access to USB 3.0, USB 2.0, and HD Audio ports.
- Build-Ready Foundation: Includes necessary dust filters for maintenance and an ARGB button for lighting control, offering a solid starting point for your high-performance PC.
Full Specifications
| Brand | ALSEYE |
|---|---|
| Color | Black |
| Material | Metal, Plastic |
| Case Type | Mid Tower |
| Model Name | Rams 2.0 Black |
| Unit Count | 1 Count |
| Light Color | ARGB |
| Connectivity | USB |
| Model Number | Rams 2.0 Black |
| Compatibility | PC |
| Cooling Method | Air, Water |
| Mfr Part Number | Rams 2.0 Black |
| Antenna Location | Gaming |
| Compatible Devices | Micro-ATX motherboards, ITX motherboards, CPU coolers up to 180mm, graphics cards up to 305mm, power supplies up to 160mm deep |
| Enclosure Material | Metal, Plastic |
| Total USB 3.0 Ports | 1 |
| Warranty Description | 2 Year Manufacturer |
| Hard Disk Form Factor | 3.5 inches |
| Supported Motherboard | Micro ATX, Mini ITX |
| Build-Ready Foundation | Includes necessary dust filters for maintenance and an ARGB button for lighting control, offering a solid starting point for your high-performance PC. |
| Full listing title | ALSEYE Rams2.0 Mid Tower PC Case Micro-ATX/ITX MATX Tempered Glass Side Panel, ARGB Control Dust Filters Support 180mm CPU Cooler/305mm GPU/160mm PSU 6x120mm Fans, 240mm Top Radiator (Black) |
Ready to buy?
ALSEYE Rams2.0 Mid Tower PC Case Micro-ATX/ITX MATX Tempered Glass Side Panel, ARGB Control Dust Filters Support 180mm CPU Cooler/305mm GPU/160mm PSU 6x120mm Fans, 240mm Top Radiator (Black) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related PC Cases
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Gemini-SQL2 Tops Text-to-SQL: Can an RTX 3060 Run a Local SQL Model?
- SNES Classic vs Sega Genesis Mini vs Raspberry Pi RetroPie: Best Plug-and-Play Retro Gaming in 2026
- Handheld Gaming PC Near Me: Where to Buy in 2025
- GLM-5.2: The Open-Weights Model Built for Long-Horizon Agentic Tasks
- Sound Blaster Audigy FX Deep Dive: Is It Worth It for a 2003 WinXP Period-Correct Gaming Build?
- AMD Ryzen AI Halo Mini PC: Open-Source Power Analyzed
- Gemma 4 12B Runs Local: Best 12GB GPUs for Google's New Open Model
- Intel llm-scaler-vllm 1.4: What Arc Pro B70 Support Means for Sub-$1500 Local Inference
- vLLM vs Ollama for a Single-User 12GB Rig in 2026
- Jellyfin on a Ryzen 5 5600G: 4K Transcoding on a $400 Mini-Server (2026)
- CompactFlash Imaging for Retro PCs: A CF133 + IDE Workflow
- Raspberry Pi Locator Shuts Down in July: Where to Buy a Pi Now
- Noctua NH-U12S vs Cooler Master ML240L for Ryzen 5800X
- Running Local LLMs on a Raspberry Pi 5 in 2026: What Works, What Doesn't
- Qwen3.6 35B-A3B on a 12GB GPU: 95 tok/s on 4070 Super, 34 on 3060
- Best Budget GPU for Local LLM Inference in 2026
- Best SSD for Expanding Your Steam Library in 2026: SATA Value Picks
- Best GPU for i7-13700K at 1440p 180Hz (GTX 1080 Upgrade)
- Ryzen 7 5800X vs Ryzen 7 5700X for Gaming and Local AI: Which Wins?
- 16GB vs 32GB RAM for Windows 11 Gaming in 2026
- Jellyfin on Raspberry Pi 4 8GB with an SSD (2026 Guide)
- How to run Qwen 3 14B on NVIDIA GeForce RTX 3090
- 180Hz 1440p Gaming Monitors Hit Entry-Level Pricing
- Best CPU for AI Inference Workstations in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090