Thermaltake UX150-L ARGB CPU Cooler; Copper Base/Aluminum Fins; 130mm PWM Fan; 500~2400 RPM; LGA 1851/1700/1200/1156/1155/1151/1150; Infinity Mirror; 130W TDP; Black; CL-P147-CA13SW-A
Bottom line: The Thermaltake UX150-L ARGB CPU Cooler; Copper Base/Aluminum Fins; 130mm: 75.6mm height fits SFF cases and compact builds; main trade-off: intel-only: no AMD AM4/AM5 socket support listed.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 75.6mm height fits SFF cases and compact builds
- ✓ Rated for 130W TDP via copper base and aluminum fin stack
- ✓ 130mm PWM fan spans 500-2400 RPM for quiet idle or full airflow
- ✓ Non-interference design clears tall RAM heatsinks
- ✓ 22 ARGB LEDs plus infinity mirror hub, synced via 5V 3-pin header
Cons
- ✗ Intel-only: no AMD AM4/AM5 socket support listed
- ✗ 130W TDP ceiling limits headroom for high-end unlocked CPUs
- ✗ Top-flow low-profile design has less fin area than a tower cooler
- ✗ ARGB needs a 5V 3-pin motherboard header; no standalone controller listed
Manufacturer description
The Thermaltake UX150-L ARGB CPU Cooler is a low-profile air cooler for compact Intel builds that still look good. It stands 75.6mm tall, so it fits most small form factor cases, and it handles up to 130W of heat through a copper base plate and an aluminum fin stack. A custom 130mm PWM fan runs from 500 to 2400 RPM. Your motherboard can keep it near-silent at idle and spin it up under load. The hydraulic bearing helps keep noise down during long sessions. Because the design doesn't overhang the memory slots, you can install tall-heatsink RAM kits without measuring clearances. The lighting is…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Thermaltake UX150-L ARGB CPU Cooler; Copper Base/Aluminum Fins…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. On the listing's own facts, the case for it is "75.6mm height fits SFF cases and compact builds"; the main trade-off is "Intel-only: no AMD AM4/AM5 socket support listed". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will the Thermaltake UX150-L fit in my small form factor case?
The cooler is 75.6mm tall. Compare that against your case's listed maximum CPU cooler height, keeping in mind that many SFF cases support coolers around this size or taller.
Which CPU sockets does the UX150-L support?
It supports Intel LGA 1851, 1700, 1200, 1156, 1155, 1151 and 1150. No AMD sockets are listed, so check the product listing before buying for an AMD build.
Can the UX150-L cool a high-end CPU?
It is rated to dissipate up to 130W of heat. That suits mainstream Intel CPUs, but processors that sustain power draw above 130W under load will exceed its rated capacity.
Will it block tall RAM modules?
No. Thermaltake describes a non-interference design in which the cooler does not overlap the memory slots, so RAM heatsink height is not a constraint.
How do I control the ARGB lighting?
The fan uses a 5V 3-pin daisy-chain ARGB connector. Plug it into a 5V 3-pin ARGB header on your motherboard and control the 22 LEDs and infinity mirror effect through your board's sync software.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【Fit for Flexibile Form Factors】An ideal choice for SFF builds or even full sized builds, coming in at 75.6mm in height compatibility is not an issue.
- 【Intel Optimized】Ensured compatibility with Intel LGA 1851/1700/1200/1156/1155/1151/1150.
- 【Infinity Mirror】Adding depth to lighting we installed an infinity mirror to the center hub of the fan for an extra effect.
- 【Non-Interference Design】No need to worry about choosing a specific kit of memory due to height requirement, thanks to the non-interference design there is no overlap from the cooler to the memory.
- 【Hydraulic Bearing Reliability】Built with reliability in mind the hydraulic bearing also excels with lowered noise during operation and enchanced thermal efficiency.
Full Specifications
| Brand | Thermaltake |
|---|---|
| Model | UX150-L ARGB |
| Voltage | 12 Volts |
| Wattage | 4.32 watts |
| Material | Copper |
| Unit Count | 1.0 Count |
| Noise Level | 25 Decibels |
| Part Number | UX150-L ARGB |
| Material Type | Copper |
| Cooling Method | Fan |
| Number of Items | 1 |
| Compatible Devices | Desktop |
| Power Connector Type | 4-Pin |
| Warranty Description | 2 Year Manufacturer |
| Maximum Rotational Speed | 2400 RPM |
| Item Dimensions L x W x H | 5.24"L x 5.24"W x 2.98"H |
Benchmark data for other processors
Ready to buy?
Thermaltake UX150-L ARGB CPU Cooler; Copper Base/Aluminum Fins; 130mm PWM Fan; 500~2400 RPM; LGA 1851/1700/1200/1156/1155/1151/1150; Infinity Mirror; 130W TDP; Black; CL-P147-CA13SW-A is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Sega Saved Nvidia in 1996: The NV1 Gamble That Shaped Every GPU
- PebbleOS Comes to the Raspberry Pi RP2350: What the Port Means for Tinkerers
- How to run Llama 3.1 8B on AMD Radeon RX 7900 XTX
- Qwen 3.6 vs Frontier Models on a Local Rig: The Honest Gap
- Cloudflare CEO: The Web's Future Is 'Pay to Crawl' as Bots Overtake Humans
- Apple Sues OpenAI Over Alleged Trade-Secret Theft: What It Means
- Linux Now Boots on a Sega Genesis — Here's What That Actually Means
- Ryzen 7 5800X vs Ryzen 5 5600G for a Budget Local-AI Workstation
- Running GLM-5.2 Locally on an RTX 3060: Ollama VRAM + tok/s
- Best Streaming Gear for New Creators in 2026
- Anthropic's 2GW AMD Deal: What It Means for Local-vs-Cloud Builders
- Best 27-inch 4K Monitor for PC and Console: Odyssey vs KOORUI
- Best Wireless Controller for PC Gaming in 2026
- Best 1440p Monitor for the RTX 3060 12GB (2026)
- Best 27-inch 1440p Monitor for Ryzen 7 5800X Esports Builds (2026)
- Best Esports Club Practice Room Gear in 2026
- CompactFlash as an IDE Boot Drive: The Definitive Win98 Storage Guide
- Best Webcam for Streaming Under $200 (2026)
- Best CPU Coolers for Ryzen and Intel Builds in 2026
- AI Bug-Hunters Are Flooding Security Reports: Running a Local Code-Audit LLM on an RTX 3060
- Running a 26B LLM Locally With No GPU: The CPU Setup Guide
- Best GPU for Stable Diffusion and Local Image Generation in 2026
- Ryzen AI Max vs RTX 40 Series: Which Wins for AI and Gaming?
- Best Raspberry Pi Alternative for Home Assistant (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090