FIDECO 60W Powered USB Hub for Laptop and PC
Bottom line: The FIDECO 60W Powered USB Hub for Laptop and PC ($30.99 on Amazon as of 2026-11-21 23:18 UTC): 10 ports total: 6 USB-A plus 4 USB-C, so no dongle swapping; main trade-off: BC1.2 charging caps at 5V/1.5A per port, too slow for fast-charging phones.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ 10 ports total: 6 USB-A plus 4 USB-C, so no dongle swapping
- ✓ USB 3.2 Gen 2 tops out at 10Gbps for fast external SSD transfers
- ✓ Included 12V 5A adapter delivers 60W, so ports stay powered under load
- ✓ Per-port on/off switches with hot-swap support, no unplugging needed
- ✓ Aluminum shell with non-slip base helps shed heat and stay put
Cons
- ✗ BC1.2 charging caps at 5V/1.5A per port, too slow for fast-charging phones
- ✗ 60W spread across 10 ports leaves little headroom if you load every one
- ✗ Bulky brick required, so it is a desk hub rather than a travel hub
- ✗ Support runs through a single email address at fideco.cn, not a US line
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for FIDECO 60W Powered USB Hub for Laptop and PC, so this read rests on the manufacturer's listed specs and the current price in the accessories category (how we evaluate). Compare with similarly-priced alternatives in the accessories category before committing. On the listing's own facts, the case for it is "10 ports total: 6 USB-A plus 4 USB-C, so no dongle swapping"; the main trade-off is "BC1.2 charging caps at 5V/1.5A per port, too slow for fast-charging phones". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【10Gbps Super Speed】FIDECO USB hub features USB 3.2 Gen 2 standard with maximum data transfer speed up to 10Gbps, and it will greatly improve your work productivity and connectivity.
- 【60W Powered USB Hub】Equipped with 12V 5A power adapter for stable and reliable powering and charging for your various devices, and the built-in surge protection can effectively protect your devices from damage during electrical storms.
- 【Support BC1.2 Charging】The USB 3.2 Gen 2 ports can support BC1.2 charging with a maximum power output of 5V/1.5A, which is sufficient to charge USB devices. The USB splitter can support data transfer and device charging simultaneously, therefore, the powered USB hub can absolutely save your time, help eliminate dangling cords or unsightly plugs, and help you get rid of the messy desk.
- 【Independent On/Off Switch】The specially designed switches can help control your device more easily without frequent plugging and unplugging in daily use. Our USB port hub can support hot-swapping for seamless peripheral management, greatly boosting your efficiency.
- 【Aluminum Design】FIDECO powered USB hub is made of full aluminum alloy to help dissipate heat quickly. The bottom of the data hub is equipped with non-slip rubber pad, which can keep more stability without scratching your desk. The USB hub can be for both practical and aesthetic purposes!
- 【USB A and USB C Ports】FIDECO USB hub for laptop is equipped with 6 USB-A ports and 4 USB-C ports, so just one USB data hub can meet your needs of connecting devices with USB A or USB C port.
Full Specifications
| Brand | FIDECO |
|---|---|
| Color | Silver |
| Connectivity | USB-C |
| Model Number | HCA64 |
| Compatibility | PC, Switch, Mac, Linux |
| Mfr Part Number | HCA64 |
| Number of Ports | 10 |
| Special Feature | Anti-Slip, Fast Charging, Fast Data Transfer, Plug and Play, Powered |
| Total Usb Ports | 10 |
| Compatible Devices | Card Readers, Dashcams, Desktops, Gaming Consoles, Laptops |
| Data Transfer Rate | 10 Gigabits Per Second |
| Enclosure Material | Aluminum |
| Hardware Interface | USB Type C |
| Additional Features | Anti-Slip, Fast Charging, Fast Data Transfer, Plug and Play, Powered |
| Warranty Description | one-year |
| Item Dimensions L x W x H | 6"L x 2"W x 1.1"H |
| Full listing title | FIDECO 60W Powered USB Hub for Laptop and PC, 10-Port 10Gbps USB Splitter with 12V 5A Power Adapter, Aluminum USB 3.2 Gen 2 Multiport Adapter, 6 USB-A and 4 USB-C Ports, Support BC1.2 Charging |
Ready to buy?
FIDECO 60W Powered USB Hub for Laptop and PC, 10-Port 10Gbps USB Splitter with 12V 5A Power Adapter, Aluminum USB 3.2 Gen 2 Multiport Adapter, 6 USB-A and 4 USB-C Ports, Support BC1.2 Charging is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Best Controller for Sim Racing Beginners on PC in 2026
- Best SATA SSDs for Older PCs and Retro Builds in 2026
- On-Device AI Keyboards: What a Sub-2GB LLM Needs to Run Local
- Raspberry Pi 4 as a SimHub Dash for a Logitech G29 Rig
- GTX 1660 VRAM: Why 8GB Doesn't Exist (Real Specs)
- NVFP4 on RTX 50-Series: What llama.cpp's Native FP4 Support Means for Local Inference
- Best PlayStation 5 Controllers in 2026: 5 Picks for Every Player
- Pro-Level 180Hz 1440p Gaming Monitor for $159: Gigabyte Deal
- Is the KOORUI 27-inch 4K Mini-LED a Real Upgrade for Console Gaming?
- Intel Arc Pro B70 (BMG-G31) Posts Strong Linux Gaming Numbers — How It Stacks Up Against an RTX 3060
- How Much System RAM for Llama 3.1 70B on a 12GB RTX 3060? The 48GB Kit Question
- Best CPU Cooler for a Ryzen 5800X Under PBO + Manual Overclock in 2026
- Black Friday Gaming Peripheral Deals: 5 Headset, Keyboard, Mouse and Webcam Picks
- ASUS A7N8X-Deluxe + Athlon XP Barton 2500+: The Definitive 2003 Enthusiast Build Guide
- Grok Imagine Video 1.5 Hits #2 — But Local Video Gen on an RTX 3060 Is Still Free
- 7800X3D vs 5700X3D: Is the AM5 Upgrade Worth It?
- RTX 3060 Drop-In vs AM4 Rebuild for an i7-9700K in 2026
- Best SSD for PS4 Pro: SATA Upgrades That Actually Help
- Samsung's 360Hz 4K QD-OLED vs Budget 4K Gaming Monitors: Is the Premium Worth It?
- Intel Arc B580 vs RTX 3060 12GB for Local LLMs in 2026
- Best Budget Gaming Peripherals Under $100 in 2026
- Llama 3.2 3B: Raspberry Pi 4 8GB vs RTX 3060 12GB for Local Inference
- How to run Llama 3.1 70B on AMD Radeon RX 7900 XTX
- Best Sim Racing Wheel for Beginners: G29 vs HORI vs Thrustmaster
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090