Skip to main content
LINKUP PCIe 5.0 Riser Cable | Vertical GPU Mount | Right Angle, 20cm
LINKUP

LINKUP PCIe 5.0 Riser Cable | Vertical GPU Mount | Right Angle, 20cm

Bottom line: The LINKUP PCIe 5.0 Riser Cable ($66.96 on Amazon as of 2026-11-07 17:14 UTC): Full PCIe 5.0 x16 link, rated at 128GB/s by LINKUP; main trade-off: whether the 20cm right-angle version fits depends on your case; measure first.

$66.96 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Buy on Amazon — $66.96 Compare to similar accessories

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-11-07. Price and availability subject to change.

Pros & Cons

Pros

  • ✓ Full PCIe 5.0 x16 link, rated at 128GB/s by LINKUP
  • ✓ Works with PCIe 4.0 motherboards and GPUs
  • ✓ Tested on ASUS WS WRX80SE WiFi II and WRX90E Gen5 boards
  • ✓ Multilayer shielding and tuned impedance to reduce EMI and crosstalk

Cons

  • ✗ Whether the 20cm right-angle version fits depends on your case; measure first
  • ✗ Needs a separate vertical GPU bracket or case mount
  • ✗ Gen5 speed only helps when both the board and GPU support PCIe 5.0
  • ✗ Many length and angle options make it easy to order the wrong one

Manufacturer description

The LINKUP PCIe 5.0 Riser Cable lets you move your graphics card to a vertical GPU mount and keep the fast link. This 20cm right-angle version carries a full PCIe 5.0 x16 connection. LINKUP rates it at 128GB/s, and it also works with PCIe 4.0 boards and cards. LINKUP says it tested the cable on ASUS WS WRX80SE WiFi II and WRX90E Gen5 motherboards. It is built for current cards such as the RTX 5090 and RX 9070. Tuned impedance and multilayer shielding reduce crosstalk and EMI. On Gen5 risers, that interference is the usual cause of instability under load or in tight bends. Why mount the GPU…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored LINKUP PCIe 5.0 Riser Cable using a rating × review-volume × price-fit model applied to published specs and reviews across the accessories category. LINKUP's accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Does the LINKUP PCIe 5.0 riser cable work with an RTX 5090?

Yes. LINKUP says the cable is built for next-gen cards like the RTX 5090 and RX 9070, and it carries a full PCIe 5.0 x16 link rated at 128GB/s.

Will this riser work on a PCIe 4.0 motherboard?

Yes. LINKUP says the cable is fully backward-compatible with PCIe 4.0. It runs at the speed of your motherboard and GPU, so a Gen4 board runs at Gen4 speed.

How do I know if 20cm is the right length for my case?

LINKUP recommends running a string from the motherboard PCIe slot to the GPU board to measure the distance. If 20cm doesn't fit, the same cable comes in lengths from 2 to 35.4 inches.

What connector angles are available besides right angle?

The same cable comes with right angle, straight, left angle, double reverse, single reverse right, single reverse left or single reverse straight connectors. Pick the one that matches your case layout.

Key Features

  • Verified Compatibility — Built for vertical GPU mount and standard layouts across towers, SFF/ITX sandwich cases, open benches, and water-cooled rigs. Fully backward-compatible with PCIe 4.0 and validated on ASUS WS WRX80SE WiFi II and WRX90E Gen5 boards. Ready for next-gen cards like RTX 5090 and RX 9070. Use this PCIe 5.0 riser cable to place the GPU exactly where airflow and aesthetics demand—without giving up stability.
  • Gen5 x16 Performance & Shielding — Delivers full 128GB/s on PCIe 5.0 x16 with tuned impedance, premium conductors, and multilayer shielding to suppress crosstalk and EMI. The AVA design targets clean eye margins under load and tight bends, making it a dependable PCIe Gen5 riser cable for high-FPS gaming, AI, and storage workflows. Replace Gen 3 and Gen 4 PCIe cables while preserving upgrade headroom for future GPUs.
  • Showcase Aesthetics, Improve Cooling — Move the card where it breathes. A vertical mount GPU clears intake for thick shrouds & radiators, reducing heat soak & noise while giving builds a clean, gallery-style look. Route like a tidy GPU extension cable & keep clocks steady thanks to robust shielding & low-loss geometry. Builders report good quality & that it simply works great when paired with the right bracket and case layout. View Product Description to ensure Compatibility with your PC case.
  • Installation Instructions — Measure with a string from the motherboard slot to the GPU PCB to pick the correct span. Seat connectors fully until latched; Fold & Flex in any way. Use standoffs and support brackets if the chassis requires it. If fit seems tight, contact us before forcing parts—we’ll advise the best path for your case model. Clear guidance turns this into a straightforward PCIe cable install, even in cramped ITX routes.
  • Choose the right Cable — Choose a length between 2–35.4 inches (see Installation Instruction) and the connector you need: right angle, straight, left angle, double reverse, single reverse right, single reverse left, or single reverse straight. One family covers ITX sandwiches, server trays, and vertical displays. Consistent Gen5 signal integrity across sizes makes it a flexible PCIe extender or GPU riser cable for clean cable management today with room to evolve tomorrow.

Full Specifications

Size20cm - v4
BrandLINKUP
ColorWhite
ModelAVA5
UnitCount1
ManufacturerLINKUP Technology Inc.
ItemPartNumberAG-P5-33SR-020WH

Hardware benchmark data

Ready to buy?

LINKUP PCIe 5.0 Riser Cable | Vertical GPU Mount | Right Angle, 20cm is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $66.96

*Price sourced from Amazon.com. Last updated 2026-11-07. Price and availability subject to change.

Read our analysis

SpecPicks coverage that features this Accessorie.

Related Accessories

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
LINKUP PCIe 5.0 Riser Cable | Vertical GPU Mount | Right Angle, 20cm
$66.96
View on Amazon →