Skip to main content
Double Wire Plug in Connector with Locking Buckle, Flame Retardant Locking Wire Quick Connectors, Suitable for Emergency Repairs, Home and Automotive Wiring, Easy to Use (20PCS for 18-22 AWG)

Double Wire Plug in Connector with Locking Buckle

Status: Double Wire Plug in Connector with Locking Buckle: Unavailable on Amazon as of . SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.

Bottom line: The Double Wire Plug in Connector with Locking Buckle: No stripping or crimp tool needed: push wires in and close the buckle; main trade-off: limited to 22-18 AWG; won't take 16 AWG or heavier power leads.

Unavailable on Amazon as of

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Currently unavailable on Amazon. Not the same product — an in-stock alternative:

Similar: RGBZONE 10Pcs 4 Pin 10mm LED Strip Connectors… — $16.99 on Amazon as of 2026-11-20 11:17 UTC (price may vary).

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ No stripping or crimp tool needed: push wires in and close the buckle
  • ✓ Locking buckle clicks audibly to confirm a pull-resistant connection
  • ✓ Fits 22-18 AWG (0.3-0.75 mm2) solid, stranded and flexible wire
  • ✓ Flame-retardant housing with no exposed conductors once closed
  • ✓ 20-piece pack covers LED strip splices, appliance and auto wiring

Cons

  • ✗ Limited to 22-18 AWG; won't take 16 AWG or heavier power leads
  • ✗ Insulation must measure 1.6-2.1 mm OD; thin-jacket wire may not seat
  • ✗ Two-wire inline splice only; no 3- or 4-way branch connectors included
  • ✗ No current or voltage rating listed; confirm your load before use

Manufacturer description

These Generic double-wire plug-in connectors join two wires in about a second with no stripping and no crimp tool. Push each conductor into its port and close the locking buckle. An audible click tells you the connection is seated. The latch is built to resist vibration and pull-out, so a joint behind an LED strip controller or under a dashboard stays put. The 20-piece pack fits 22-18 AWG wire. That covers 0.3-0.75 mm2 conductors in solid, stranded or flexible form, with an insulation outer diameter of 1.6-2.1 mm. The wire goes in with its insulation on, so no bare copper is left exposed…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Double Wire Plug in Connector with Locking Buckle, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. On the listing's own facts, the case for it is "No stripping or crimp tool needed: push wires in and close the buckle"; the main trade-off is "Limited to 22-18 AWG; won't take 16 AWG or heavier power leads". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

What wire sizes do these locking connectors fit?

They fit 22-18 AWG wire, which is 0.3-0.75 mm2 conductors. Solid, stranded and flexible wire all work. The insulation outer diameter needs to be between 1.6 and 2.1 mm for a secure fit.

Do I need to strip the wires before connecting them?

No. The push-in design needs no stripping and no tools. Insert each wire into its port and close the locking buckle until it clicks.

Can I use these to connect or extend LED strip lights?

Yes. Connecting LED strip lights and extending power leads are listed uses, as long as the strip's wires are 22-18 AWG with 1.6-2.1 mm insulation. Check your strip's lead gauge first.

Will the connection hold up to vibration in a car?

The locking buckle is designed to make a vibration-proof, pull-resistant connection, and automotive wiring is a listed application. Make sure the wire falls within the 22-18 AWG range.

What is the maximum current or voltage rating?

The product listing doesn't state a current or voltage rating. Check the seller's product page or contact the manufacturer before using these on circuits with higher loads.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • One-Second, No-Tool Connection: Experience the ultimate convenience with our Double-Wire Plug-in Connector with Locking Buckle. Its push-in design requires zero stripping or tools, making wire joining incredibly fast and effortless for anyone
  • Positive Lock for Ultimate Security: The integrated Locking Buckle on this Double-Wire Connector clicks audibly when engaged, creating a vibration-proof and pull-resistant connection that you can trust for long-term, worry-free use
  • Fits 22–18 AWG Wires: Designed for 0.3–0.75 mm² solid, stranded and flexible wires with 1.6–2.1 mm insulation diameter. Provides a secure insulated connection with no exposed conductors.
  • Flame-Retardant Safety Housing: Built with safety first, the durable housing is made from flame-retardant material, preventing fire spread and resisting aging to protect your electrical circuits in LED lighting and home appliance setups
  • Wide Application Across Projects: From connecting LED strip lights and extending power cords to wiring household appliances and crafting control panels, this reliable connector is your go-to solution for countless electrical and DIY tasks

Full Specifications

BrandGeneric
Color20PCS(18-22 AWG)
Gauge0.5
Model26-01-07-01
TerminalPlug-in
Stud SizeD2 Wire Connectors
Unit Count20 Count
Part Number26-01-07-01
Material TypeHigh Precision Thickened Brass
Wire Diameter0.4 millimeters
Connector TypeD2 Wire Connectors
Maximum Voltage120 volts
Number of Items1
Connector GenderMale
Contact MaterialBrass
Vibration/RumbleYes
Specification MetD2 Wire Connectors
Included ComponentsDouble Wire Plug in Connector With Locking Buckle
Insulation MaterialPolycarbonate
Warranty DescriptionnO
Full listing titleDouble Wire Plug in Connector with Locking Buckle, Flame Retardant Locking Wire Quick Connectors, Suitable for Emergency Repairs, Home and Automotive Wiring, Easy to Use (20PCS for 18-22 AWG)

Ready to buy?

Amazon shows no buyable offer for Double Wire Plug in Connector with Locking Buckle at the last check. A similar in-stock product is RGBZONE 10Pcs 4 Pin 10mm LED Strip Connectors…. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

View Similar — $16.99

Related RGB & Lighting

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
This listing is unavailable. Similar, in stock:
RGBZONE 10Pcs 4 Pin 10mm LED Strip Connectors…
Similar, in stock — $16.99 →