Adafruit Thin Plastic Speaker w/Wires - 8 ohm 0.25W
Bottom line: The Adafruit Thin Plastic Speaker w/Wires: 8 ohm / 0.25W rating matches common Arduino and Raspberry Pi audio breakout outputs; main trade-off: 0.25W output is too quiet for anything beyond close-range beeps and voice prompts.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 8 ohm / 0.25W rating matches common Arduino and Raspberry Pi audio breakout outputs
- ✓ Thin plastic body fits flush inside slim enclosures and project lids
- ✓ Pre-attached wires skip soldering to fragile speaker terminals
- ✓ Greeting-card heritage means very low weight for handheld or wearable builds
Cons
- ✗ 0.25W output is too quiet for anything beyond close-range beeps and voice prompts
- ✗ 8 ohm at a quarter watt means no real bass response for music playback
- ✗ Thin plastic housing offers no mounting flange or screw tabs
- ✗ Needs an external amplifier board for usable volume, adding cost and wiring
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Adafruit Thin Plastic Speaker w/Wires, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the audio & midi category before committing. On the listing's own facts, the case for it is "8 ohm / 0.25W rating matches common Arduino and Raspberry Pi audio breakout outputs"; the main trade-off is "0.25W output is too quiet for anything beyond close-range beeps and voice prompts". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Perfect addition to any audio project
- 8O impedance and 0.25W of power
- Originally designed for 'talking' greeting cards
- Very simple, plastic body is extremely lightweight and thin
Full Specifications
| Brand | Adafruit |
|---|---|
| Color | black |
| Impedance | 8 Ohms |
| MP3 player | No |
| Model Name | 1891 |
| Model Number | 1891 |
| Power Source | Battery Powered |
| Speaker Size | 1.5 Inches |
| Speaker Type | Thin Plastic Speaker |
| Is Waterproof | FALSE |
| Mounting Type | Flush Mount |
| Series Number | 1891 |
| Warranty Type | Limited |
| Built-In Media | 2 x Speakers |
| Control Method | Voice |
| Number of Items | 2 |
| Woofer Diameter | 39 Millimeters |
| Antenna Location | car |
| Audio Driver Size | 39 Millimeters |
| Audio Driver Type | Dynamic Driver |
Ready to buy?
Adafruit Thin Plastic Speaker w/Wires - 8 ohm 0.25W is vintage hardware; the used and vintage market on eBay carries most of the live inventory. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. It also has an Amazon listing — check it for current price and availability. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Audio & MIDI
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Best Quiet CPU Cooler for Silent Workstation and Office Builds 2026
- SATA SSD vs NVMe for a Ryzen 5 5600G Budget Build in 2026
- Linux Gaming Keeps Closing the Gap: What the Latest Kernel Work Means
- How to run Qwen 3 14B on Apple M3 Ultra
- Running a Modern SATA SSD in a Windows XP Retro Gaming PC
- Ryzen 7 5800X vs 5700X: Best 8-Core AM4 CPU 2026
- Lemonade v10.5.1: an MTP + ROCm 7.13 quick start for Strix Halo
- Reviving the LAN Party in 2026: Arcade Sticks, Classic Consoles, and Local Multiplayer
- Building a 1999 GeForce 256 + Pentium III Win98 Rig in 2026
- Best CompactFlash and IDE-to-USB Adapters for Retro PC Builds (2026)
- Gemini-SQL2 Tops Text-to-SQL — Can a 12GB RTX 3060 Run Local SQL Models Instead?
- Best 12GB GPU for Local LLMs in 2026
- Super Mario 64 Nintendo DS Port Lands With Multiplayer Support
- Sound Blaster AWE32 vs AWE64: The 1998 MIDI Decision
- Intel Arc A770 16GB for Local LLMs: 2025–2026 Guide
- Steam Deck Randomly Awakens? Causes & Fixes (2026)
- MSI Raider 16 Max HX Review: Elite Gaming and Creator Power
- SANSUI 27" 4K vs KOORUI 27" QD-Mini LED for PS5 & 4K Gaming in 2026
- BENGOO G9000 vs Turtle Beach Recon 50: Best Sub-$40 Wired Headset
- How to Identify Any Vintage GPU: A Visual + GPU-Z Guide for Retro PC Builders
- Meta Is 'Token Managing' Now: Cut Local-LLM Cost on a Single RTX 3060
- Intel Arc AI Training in 2026: What Workloads Actually Work
- Claude Opus 4.8 Ships, Tops GPT-5.5 on Intelligence Index
- AI-Driven Win98 LAN Party Server Config Generation
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090