Skip to main content
Tekpower Analog Display TP30SWI 30 Amp DC 13.8V Switching Power Supply with Noise Offset
Tekpower

Tekpower Analog Display TP30SWI 30 Amp DC 13.8V Switching Power Supply with Noise Offset

Bottom line: The Tekpower Analog Display TP30SWI 30 Amp DC 13.8V Switching Power Supply: 30A maximum output covers most 100W HF transceivers and many amplifiers; main trade-off: output is fixed at 13.8V, so it can't power 5V, 9V or variable-voltage gear.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ 30A maximum output covers most 100W HF transceivers and many amplifiers
  • ✓ Fixed 13.8V DC matches the voltage 12V-class radio gear is designed for
  • ✓ Noise offset knob moves switching interference off your receive frequency
  • ✓ Rear main output plus front snap-in output for a second device
  • ✓ Fused, with overheat protection and a 1-year USA warranty

Cons

  • ✗ Output is fixed at 13.8V, so it can't power 5V, 9V or variable-voltage gear
  • ✗ 30A is a maximum rating; the continuous current rating isn't stated
  • ✗ Switching design can still need noise offset tuning on some bands
  • ✗ Only two outputs; running several radios needs a distribution block

Manufacturer description

The Tekpower TP30SWI is a 13.8V DC switching power supply built for ham and CB radio operators who need steady current for a base station, mobile rig on the bench, or a linear amplifier. It delivers a fixed 13.8V DC output with up to 30A maximum current. That is the standard voltage most 12V-class radio gear is designed to run on. Switching supplies can put RF hash onto your receive audio. Tekpower designed the TP30SWI to keep switching noise down for communication use. If you still hear interference on a particular frequency, turn the front-panel noise offset knob to push it away from where…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Tekpower Analog Display TP30SWI 30 Amp DC 13.8V Switching Power Supply, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies category before committing. On the listing's own facts, the case for it is "30A maximum output covers most 100W HF transceivers and many amplifiers"; the main trade-off is "Output is fixed at 13.8V, so it can't power 5V, 9V or variable-voltage gear". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for power supplies of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Can the Tekpower TP30SWI power a 100 watt HF radio?

Most 100W HF transceivers run on 13.8V DC and draw around 20-23A on transmit. The TP30SWI's 13.8V output and 30A maximum current cover that range. Check your radio's manual for its exact peak current draw.

Is the output voltage adjustable?

No. The TP30SWI has a fixed 13.8V DC output. If you need a variable bench supply for other electronics, this model isn't the right fit.

What does the noise offset knob do?

Switching power supplies generate noise that can show up in your receiver. If you hear interference, turn the noise offset knob to shift that noise away from the frequency you are using.

How many devices can I connect at once?

There are two outputs: the main DC output on the back and a snap-in output on the front. Together they share the 30A maximum, so the total draw of everything connected should stay under that limit.

What warranty does the TP30SWI come with?

Tekpower includes a 1-year USA warranty. Check the product listing or Tekpower's support page for current claim terms.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • 13.8V DC Power Supply for Ham/CB Radio
  • 30A MaxCurrent Output
  • DC 13.8V Fixed Output
  • Noise offset
  • 1 Year USA warranty

Full Specifications

BrandTekpower
ColorBlack
Amperage30 A
Unit Count1 Count
Form Factorbenchtop
Model NumberTP30SWI
Input Voltage110 volts_of_alternating_current
Maximum Power414 watts
Output Current30 A
Output Voltage13.8 volts
Output Wattage414 watts
Item Dimensions7.5 x 2.8 x 7.5 inches
Mfr Part NumberTP30SWI

Ready to buy?

Tekpower Analog Display TP30SWI 30 Amp DC 13.8V Switching Power Supply with Noise Offset is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Power Supplies

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →