Skip to main content
M2.5 Hex Standoff Spacers Nuts Screws Kit,160 Pcs M2.5 Male Female Metric Thread Mount Spacer Screw Nut Bolt Motherboard Spacer Accessories for PCB, Desktop Computers Circuit Board Assortment Kit
DANA FRED

DANA FRED M2.5 Hex Standoff Spacers Nuts Screws Kit

Bottom line: The DANA FRED M2.5 Hex Standoff Spacers Nuts Screws Kit: 160 pieces: 80 brass standoffs plus 40 M2.5 x 6mm screws and 40 M2.5 nuts; main trade-off: M2.5 thread only; no M2 or M3 hardware for boards with other hole sizes.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ 160 pieces: 80 brass standoffs plus 40 M2.5 x 6mm screws and 40 M2.5 nuts
  • ✓ Four lengths (6/10/15/20mm) in both male-female and female-female styles
  • ✓ Brass standoffs resist rust and oxidation, per the manufacturer
  • ✓ Clear, labeled storage box keeps all 10 sizes separated

Cons

  • ✗ M2.5 thread only; no M2 or M3 hardware for boards with other hole sizes
  • ✗ Only 10 pieces per standoff length, so large builds may run short
  • ✗ Screws come in one length (6mm) only
  • ✗ Many ATX desktop motherboard mounts use other threads; confirm fit first

Manufacturer description

The DANA FRED M2.5 Hex Standoff Spacers Kit gives you 160 pieces of M2.5 mounting hardware in one labeled case. It is built for PCB mounting, circuit board projects and desktop computer DIY work. You get two standoff styles in four lengths each (6, 10, 15 and 20mm), with 10 pieces per size. The male-to-female brass standoffs have a 6mm threaded stud. The female-to-female hex columns are threaded at both ends. Together they make 80 standoffs. The kit also includes 40 M2.5 x 6mm screws and 40 M2.5 nuts, so you can stack boards, raise a PCB off a case floor or build multi-layer assemblies…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for DANA FRED M2.5 Hex Standoff Spacers Nuts Screws Kit, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the motherboards category before committing. On the listing's own facts, the case for it is "160 pieces: 80 brass standoffs plus 40 M2.5 x 6mm screws and 40 M2.5 nuts"; the main trade-off is "M2.5 thread only; no M2 or M3 hardware for boards with other hole sizes". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for motherboards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

What exactly comes in the DANA FRED M2.5 standoff kit?

160 pieces in total: 10 each of male-to-female brass standoffs in 6, 10, 15 and 20mm (with a 6mm stud), 10 each of female-to-female hex standoffs in 6, 10, 15 and 20mm, plus 40 M2.5 x 6mm screws and 40 M2.5 nuts.

Will these standoffs fit my board or case?

Every piece in the kit uses M2.5 metric thread. Check your board's mounting-hole size first. They fit boards and cases drilled for M2.5, but not ones that need M2, M3 or other thread sizes.

What are the standoffs made of?

The standoffs are brass. The manufacturer says they resist corrosion, rust and oxidation in high heat, cold and humid conditions, and that the threads are clean and burr-free.

Can I stack standoffs to get a custom height?

Yes. Screw the 6mm stud of a male-to-female standoff into a female-to-female standoff to reach heights between the four listed lengths. Use the included M2.5 screws and nuts to secure each end.

How is the kit stored and organized?

All 160 pieces come in a durable, clear storage box with labels, so you can pick the right size by sight.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • 【Hex Standoffs Nuts Screws Kit】 :The hex standoff nut screw kit includes male to female brass hex standoffs M2.5 x6/10/15/20 +6mm and Double pass hexagonal copper column M2.5*6/10/15/20mm each 10 pieces with matching screws M2.5 x6mm and nuts M2.5 each 40pieces, total 160 pieces, different sizes and enough quantities can meet your different daily needs
  • 【High Quality Material】The hexagonal copper column are made of durable brass material with excellent workmanship which have good corrosion resistance in bad environment like high temperature, cold weather, and high humidity areas. They have superior rust resistance and excellent oxidation resistance, which can ensure long time using, all threads in the kit are correctly sized, clean and burr-free
  • 【Wide Application】 Standoff spacers can be widely used in almost universal and cover most hardware DIY projects for desktop computers and some electronics
  • 【Standoffs Spacers Features】 The standoff spacers adopt a six-sided design, which is easy to grip and can achieve maximum torque, allowing you to tighten easily and efficiently
  • 【Multi-functional Storage Box】 160 pieces 10 sizes M2.5 standoffs spacers screws nuts assortment kit are package in a durable transparent box with label. It is easy to distinguish the size of the product, you can choose the suitable one to meet all your needs

Full Specifications

SizeM2.5 Brass Standoff Kit - 160 Pieces
BrandDANA FRED
ColorBrass
ModelM2.5
MaterialBrass
Set NameM2.5 Brass Standoff Kit - 160 Pieces
Size NameM2.5 Brass Standoff Kit - 160 Pieces
Item ShapeHexagonal
Part NumberXHHD17001
Thread SizeM2.5
Finish TypesBrass
Fastener TypeHex
Item Diameter2.5 millimeters
Material TypeBrass
Item Dimensions5.2 x 0.5 x 2.9 inches
Number Of Items160
Number of Pieces160
Outside Diameter2.5 millimeters
Screw Head StyleHex
Item dimensions L x W x H5.2 x 0.5 x 2.9 inches
Full listing titleM2.5 Hex Standoff Spacers Nuts Screws Kit,160 Pcs M2.5 Male Female Metric Thread Mount Spacer Screw Nut Bolt Motherboard Spacer Accessories for PCB, Desktop Computers Circuit Board Assortment Kit

Benchmark data for other processors

Ready to buy?

M2.5 Hex Standoff Spacers Nuts Screws Kit,160 Pcs M2.5 Male Female Metric Thread Mount Spacer Screw Nut Bolt Motherboard Spacer Accessories for PCB, Desktop Computers Circuit Board Assortment Kit is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Motherboards

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →