Sunon HA60151V41000UA99 Fan 12 V DC 0.27 W 60 x 60 x 15 mm 2200 RPM 21.6 m³/h
Status: Sunon HA60151V41000UA99 Fan 12 V DC 0.27 W 60 x…: Unavailable on Amazon as of . SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.
Bottom line: The Sunon Fan 12 V DC 0.27 W 60 x 60 x 15 mm 2200 RPM 21.6 m³/h: Rated 14.5 dB(A), near-silent for desk-side builds; main trade-off: 21.6 m³/h (about 12.7 CFM) is too little for hot CPUs or GPUs.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Rated 14.5 dB(A), near-silent for desk-side builds
- ✓ Draws only 0.022 A (0.27 W) at 12 V DC
- ✓ Wide 4.5-13.8 V DC input range works on 5 V or 12 V rails
- ✓ Slim 15 mm frame fits tight 60 mm mounting spots
- ✓ Vapo bearing rated for -10 to +70 °C operation
Cons
- ✗ 21.6 m³/h (about 12.7 CFM) is too little for hot CPUs or GPUs
- ✗ 2-wire lead: no tachometer signal or PWM speed control
- ✗ Short ~15 cm cable may need an extension in larger cases
- ✗ Connector type not stated in listing; you may need to splice
Manufacturer description
The Sunon HA60151V41000UA99 is a 60 x 60 x 15 mm axial fan for tight spaces where low noise matters more than raw airflow. It is rated at 12 V DC and spins at 2200 RPM. It moves 21.6 m³/h (about 12.7 CFM) while drawing only 0.022 A, or 0.27 W. Its rated noise level is 14.5 dB(A), quiet enough for a retro PC case, network switch, 3D printer enclosure or small project box that sits on your desk. The fan uses Sunon's Vapo bearing and accepts a wide 4.5 to 13.8 V DC input range. You can run it from a 5 V or 7 V rail when you want it slower and quieter. It is rated to operate from -10 to +70 °C…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Sunon Fan 12 V DC 0.27 W 60 x 60 x 15 mm 2200 RPM 21.6 m³/h, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the cooling & fans category before committing. On the listing's own facts, the case for it is "Rated 14.5 dB(A), near-silent for desk-side builds"; the main trade-off is "21.6 m³/h (about 12.7 CFM) is too little for hot CPUs or GPUs". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for cooling & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Can I run the Sunon HA60151V41000UA99 on 5 V instead of 12 V?
Yes. The rated input range is 4.5 to 13.8 V DC, so 5 V is within spec. Expect lower speed and airflow than the 2200 RPM and 21.6 m³/h rated at 12 V.
Does this fan support PWM or report its RPM to a motherboard?
No. It has a two-wire lead (power and ground only), so there is no tachometer output and no PWM control. You can only change its speed by changing the supply voltage.
How loud is this 60mm Sunon fan?
Sunon rates it at 14.5 dB(A) at 2200 RPM on 12 V DC, which makes it a good fit for quiet enclosures and desk-side equipment.
How long is the cable and what connector does it use?
The lead is about 15 cm long with two wires. The listing does not specify a connector type, so check the product listing or plan to splice it or add an adapter for your header.
Will it fit where my old 60 x 60 x 15 mm fan was, and what temperatures can it handle?
It measures 60 x 60 x 15 mm, so it matches slim 60 mm fan slots of the same thickness. It is rated to operate from -10 to +70 °C. Compare mounting hole spacing with your existing fan before you buy.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Axial fan, dimensions: 60 x 60 x 15 mm.
- SUNON HA60151V41000UA99
- Voltage: DC 12V, Power: 0.27W, Power Consumption: 0.022A
- Rotation speed: 2200 rpm, air flow: 21.6 m³/h, noise level: 14.5 dB (A) Vapo bearing.
- Operating temperature: -10 to +70 °C, number of wires: 2. Cable length: about 15cm
Full Specifications
| Brand | Sunon |
|---|---|
| Model | HA60151V4-1000U-A99 |
| Voltage | 12 Volts |
| Wattage | 207 watts |
| Dimensions | 60 x 60 x 15 mm |
| Unit Count | 1.0 Count |
| Noise Level | 14.5 Decibels |
| Part Number | HA60151V4-1000U-A99 |
| Cooling Method | Air |
| Rotation speed | 2200 rpm, air flow: 21.6 m³/h, noise level: 14.5 dB (A) Vapo bearing. |
| Number of Items | 1 |
| Air Flow Capacity | 21.6 Cubic Meters Per Hour |
| Compatible Devices | Desktop |
| Included Components | Fan |
| Power Connector Type | 6-Pin |
| Axial fan, dimensions | 60 x 60 x 15 mm. |
| Maximum Rotational Speed | 2200 RPM |
| Item Dimensions L x W x H | 2.36"L x 0.59"W x 2.36"H |
Benchmark data for other processors
Ready to buy?
Amazon shows no buyable offer for Sunon HA60151V41000UA99 Fan 12 V DC 0.27 W 60 x… at the last check. An Amazon search for this model lists current offers. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cooling & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Best GPU for 1080p Esports Under $400 in 2026: RTX 3060 Showdown
- Logitech Slashes Gaming Mouse Prices up to 47% for Prime Day
- Best Sound Card and DAC for Competitive FPS Players in 2026
- Advanced Shader Delivery on the RX 9070 XT: Benchmark Results
- Best Retro PC Storage Adapters in 2026: IDE, SATA & CompactFlash Picks
- Build a Raspberry Pi Bird-Song Logger with a USB Mic (2026)
- 48GB DDR5 or 12GB VRAM? What Actually Speeds Up Local LLMs
- Troubleshooting Local LLM Inference on Raspberry Pi 4 8GB and Pi 5: OOM, Swap, Quantization Crashes, and…
- GameNative Unlocks Up to 100 FPS PC Gaming on Android
- Blue Yeti vs HyperX QuadCast 2 S: Best USB Mic for New Streamers
- Best Single-Board Computer for a 2026 Home Lab
- Best Retro-PC Storage & Drive-Imaging Kit in 2026: 5 Picks
- Samsung Odyssey 4K vs KOORUI 27" 4K Mini-LED: Which Wins?
- Building a Budget Local-AI Box: Ryzen 7 5800X + RTX 3060 12GB
- Glide vs OpenGL vs Direct3D: The PC Gaming API War 1996-2003, Benchmarked
- Ryzen 5 5600X vs Ryzen 5 5600G for CPU-Only Gemma 3 12B
- No Wonder My CPU Was Hitting 100°C: 7 Build Mistakes
- Using a Raspberry Pi 5 with AI to Recover Lost Windows 98 INF Files (2026)
- Gemma 4 12B Runs Local: Best 12GB GPUs for Google's New Open Model
- Build a Raspberry Pi 4 NAS in 2026: Best SATA SSD Setup Over USB 3.0
- Ryzen 5 5600G vs Intel i7-9700K for Budget Gaming in 2026
- Intel Core Ultra X7 Panther Lake Performance on Linux 7.1
- AMD Ryzen 9 9950X3D2 Runs Faster on Linux Than Windows 11
- Raspberry Pi 5 Power Supply: What You Actually Need (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090