Haokiang Halokny VGA Extender Over Ethernet Adapter
Bottom line: The Haokiang Halokny VGA Extender Over Ethernet Adapter: Extends VGA video up to 100 ft over standard network cable; main trade-off: VGA carries no audio; sound needs a separate cable.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Extends VGA video up to 100 ft over standard network cable
- ✓ 2-pack covers both ends of the run, no extra hardware listed
- ✓ Works with CAT5, CAT5e and CAT6 RJ45 cables
- ✓ Male VGA plug seats directly into standard female VGA ports
- ✓ Thin Ethernet cable routes through walls and conduit more easily than VGA
Cons
- ✗ VGA carries no audio; sound needs a separate cable
- ✗ 100 ft is the stated maximum; longer runs are not supported
- ✗ Listing gives no maximum resolution or refresh-rate spec
- ✗ Analog VGA only; no HDMI, DVI or DisplayPort support
Manufacturer description
The Halokny VGA Extender Over Ethernet Adapter 2-pack lets you run an analog VGA signal through an ordinary CAT5, CAT5e or CAT6 network cable. Each adapter has a VGA 15-pin male plug on one side and an RJ45 female jack on the other. Plug one into the VGA port of your source and the other into your display, then connect them with an Ethernet cable up to 100 ft long. That is useful when a standard VGA cable is too short, too thick to route through a wall plate, or too expensive at long lengths. You may already have spare network cable lying around, and it pulls through tight spaces more easily…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Haokiang Halokny VGA Extender Over Ethernet Adapter, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro crt & display accessories category before committing. On the listing's own facts, the case for it is "Extends VGA video up to 100 ft over standard network cable"; the main trade-off is "VGA carries no audio; sound needs a separate cable". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
How far can I extend a VGA signal with these adapters?
The listing rates the Halokny adapters for runs up to 100 ft over CAT5, CAT5e or CAT6 cable. Use a continuous cable rather than chaining patch cords.
Do I need to buy two of these for one monitor?
No. The 2-pack already gives you one adapter for the source end and one for the display end, joined by your own RJ45 network cable.
Can I plug this into my home network or a switch?
No. The adapters use the Ethernet cable as a direct point-to-point link between the two VGA ports. Connect them straight to each other, not through a router, switch or wall jack wired to a network.
Will this carry audio along with the video?
No. VGA is a video-only standard, so you need a separate audio cable or speakers at the display end.
What devices does it work with, and what resolution does it support?
The listing names computers, DVRs, media centers and game consoles with a VGA 15-pin port. It does not state a maximum resolution, so check the product listing or the seller before planning a high-resolution setup.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Connector: VGA 15 Pin Male to RJ45 Female Adapter,VGA interface, through the network cable( CAT5 CAT6 RJ45) to extend the display device
- Transmit signals between your VGA video ports over CATS, CAT5E, and CAT5 CAT6 RJ45 network cables.
- Transmits signals up to 100 FT. Connectors: VGA male / RJ45 Ethernet port female.
- Suggested applications: Computer, DVR, media center, game consoles.
- Connect your personal media devices to a larger system, such as a monitor, for the ultimate viewing experience
Full Specifications
| Brand | Haokiang |
|---|---|
| Color | VGA M |
| Finish | Matte |
| Connector | VGA 15 Pin Male to RJ45 Female Adapter,VGA interface, through the network cable( CAT5 CAT6 RJ45) to extend the display device |
| Unit Count | 2 Count |
| Model Number | 8541673793 |
| Warranty Type | Limited |
| Connector Type | RJ45, VGA |
| Mfr Part Number | 7545815744 |
| Number of Items | 2 |
| Number of Ports | 1 |
| Power Plug Type | No Plug |
| Compatible Devices | Gaming Console |
| Suggested applications | Computer, DVR, media center, game consoles. |
| Specific Uses For Product | Monitor |
| Full listing title | Halokny VGA Extender Over Ethernet Adapter, VGA 15 Pin Male to CAT5 CAT6 RJ45 Female Network Cable Extender Connector Adapter(2-Pack) |
Ready to buy?
Halokny VGA Extender Over Ethernet Adapter, VGA 15 Pin Male to CAT5 CAT6 RJ45 Female Network Cable Extender Connector Adapter(2-Pack) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CRT & Display Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- The Hackaday Europe 2026 Retro PC Build: What They Actually Built and Why It Matters
- Build a Live ADS-B Flight Tracker on a Raspberry Pi 4 in 2026
- Qwen3.6 27B on a Single RTX 3060 12GB: Why MTP Drops Context From 137K to 14K
- RTX 4090 AIO Kit 2025: Pricing, Cooling & Buying Guide
- Logitech G502 Hero vs MK270 Combo: Best PC Setup for Sub-$50
- Logitech G502 Hero vs SteelSeries QcK: Building a Competitive FPS Loadout in 2026
- Best AM4 Gaming CPU in 2026: Ryzen 7 5800X vs 3700X vs 3900X vs Intel i7-9700K
- vLLM vs llama.cpp for Single-User Local Chat on a 12GB GPU
- The Pentium III 1 GHz Race: When Intel and AMD Broke the Gigahertz Barrier in the Same Week
- Build a Real-Time Flight Tracker (ADS-B) on a Raspberry Pi 4 in 2026
- Blue Yeti vs HyperX QuadCast 2 S: Best Streaming Mic 2026
- USB Wi-Fi 6 vs PCIe Wi-Fi 6E: Which Actually Fixes Gaming Lag?
- Forza Horizon 6 on Steam Deck: Best Dock and Controller Setup for 2026
- Intel Optane DIMMs Run 1-Trillion-Parameter LLM on One Workstation
- Best IDE-to-USB Adapter for Retro PC Data Recovery: FIDECO vs Unitek vs Vantec
- SANSUI vs KOORUI 27" 4K: Which Budget 4K Gaming Monitor Wins?
- Best CPU Cooler for Ryzen 7 5800X Heavy Workloads (2026)
- Best Webcam and Mic Setup for Streaming Under $300 (2026)
- ComfyUI on an RTX 3060 12GB: SDXL Throughput and VRAM Tuning
- OpenAI and Anthropic Are Giving Startups Free Compute — Here's the Local Rig That Replaces It
- Build a RetroPie Console on a Raspberry Pi 4 8GB in 2026: A Complete Walkthrough
- New Raspberry Pi 5 Active-Cooler + NVMe VESA Case Lands (3D-Printable)
- HyperX QuadCast 2 vs Blue Yeti: Best USB Mic for Streaming and Podcasting in 2026
- Save $550 on iBuyPower RTX 5070 + 7800X3D 4K Gaming PC
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090