ARCTIC P14 (5 Pack)
Status: ARCTIC P14: Unavailable on Amazon as of . SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.
Bottom line: The ARCTIC P14 (5 Pack) - PC Fans, 140mm Case Fan, Pressure-optimised,: 2.40 mmH2O static pressure suits radiators and dense heatsink fins; main trade-off: 3-pin only, so no PWM control - speed rides on motherboard DC voltage.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 2.40 mmH2O static pressure suits radiators and dense heatsink fins
- ✓ Five 140mm fans in one pack fills a full chassis or 420mm rad
- ✓ 72.8 CFM airflow per fan at the fixed 1700 RPM top speed
- ✓ Fluid Dynamic Bearing with sealed oil capsule resists lubricant leakage
Cons
- ✗ 3-pin only, so no PWM control - speed rides on motherboard DC voltage
- ✗ 1700 RPM ceiling is audible at full tilt in a quiet build
- ✗ 0.3 Sone rating is measured at spec, not a low-RPM idle figure
- ✗ No RGB or addressable lighting on this black model
Manufacturer description
The ARCTIC P14 arrives as a five-pack of 140mm case fans built around static pressure rather than raw open-air throughput, which is why it earns its place on radiators and CPU heatsinks where mesh, dust filters, and dense fin stacks fight back. Each fan spins at a fixed 1700 RPM, moving 72.8 CFM (123.76 m3/h) at 2.40 mmH2O of static pressure while measuring 0.3 Sone. ARCTIC's blade and impeller geometry is shaped to keep airflow steady without the whine that usually accompanies pressure-focused designs. Underneath sits a Fluid Dynamic Bearing with a German-developed alloy and lubricant…
SpecPicks Verdict
SpecPicks scored ARCTIC P14 (5 Pack) - PC Fans, 140mm Case Fan, Pressure-optimised… using a rating × review-volume × price-fit model applied to published specs and reviews across the cooling & fans category. ARCTIC's cooling & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cooling & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Are ARCTIC P14 fans good for radiators or just case airflow?
They are built for radiators and heatsinks. ARCTIC optimised the P14 for static pressure, rated at 2.40 mmH2O, so it keeps pushing air through dense fin stacks and dust filters where airflow-tuned fans stall.
Do the P14 fans support PWM speed control?
No. This model uses a 3-pin connector, so your motherboard controls speed by varying DC voltage instead of a PWM signal. Check your board's fan header settings for DC mode.
How loud are they at full speed?
ARCTIC rates the P14 at 0.3 Sone at its 1700 RPM speed. The impeller was designed to minimise noise, and the Fluid Dynamic Bearing runs as quietly as a sleeve bearing while lasting longer.
How much air does one P14 move?
Each fan is rated at 72.8 CFM, or 123.76 m3/h, at 1700 RPM. With five in the pack you can set up intake and exhaust across a full tower in a single purchase.
Is the 5-pack worth it over buying single fans?
Five 140mm fans in one pack works out to a low per-fan cost compared with buying singles. Price and availability change, so confirm on the product listing.
Key Features
- OPTIMISED FOR STATIC PRESSURE: The fan guarantees extremely efficient cooling, even with increased air resistance, therefore, the P14 is particularly suitable for use on heatsinks and radiators
- HIGH QUALITY BEARING: Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved
- INNOVATIVE DESIGN: The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation, the impeller was designed with a focus on minimzing the noise level
- LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life
- TECHNICAL DATA: 5 Pack, Fan speed: 1700 rpm, Airflow: 72.8 cfm | 123.76 m³/h, Noise Level: 0.3 Sone, Static pressure: 2.40 mmH₂O, Pin: 3-pin
Full Specifications
| Brand | ARCTIC |
|---|---|
| Color | Black |
| Model | ACFAN00136A |
| Voltage | 12 Volts |
| Wattage | 1.8 watts |
| Material | Metal |
| Unit Count | 5.0 Count |
| Noise Level | 0.3 Sones |
| Part Number | ACFAN00136A |
| Compatibility | PC |
| Material Type | Metal |
| Cooling Method | Fan |
| TECHNICAL DATA | 5 Pack, Fan speed: 1700 rpm, Airflow: 72.8 cfm | 123.76 m³/h, Noise Level: 0.3 Sone, Static pressure: 2.40 mmH₂O, Pin: 3-pin |
| Number of Items | 5 |
| Air Flow Capacity | 72.8 Cubic Feet Per Minute |
| Compatible Devices | Desktop |
| Included Components | P14 (5 Pack) |
| HIGH QUALITY BEARING | Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved |
| Power Connector Type | 3-Pin |
| Warranty Description | 6 years |
| Full listing title | ARCTIC P14 (5 Pack) - PC Fans, 140mm Case Fan, Pressure-optimised, Quiet Motor, Computer, Fan Speed: 1700 RPM - Black |
Ready to buy?
Amazon shows no buyable offer for ARCTIC P14 at the last check. An Amazon search for this model lists current offers. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cooling & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Game Streaming Starter Kit in 2026: Mic, Light, and Capture
- Ideogram 4.0 Open Weights: Running Text-to-Image on a 12GB GPU
- ComfyUI for NVIDIA Cosmos 3 on an RTX 3060 12GB: Setup + Limits
- Raspberry Pi OS Gets a Desktop Refresh: What Changes for Pi 4 Users
- Asus ROG Harpe II Extreme Brings a 65K-DPI Sensor — and a Gold Price Tag
- Intel Arc AI Image Generator: 2025 Setup & Performance Guide
- Best Budget Gaming Audio for 2026: Headsets, Earbuds, Mics and DACs
- Best Budget 1TB SATA SSD 2026: BX500 vs WD Blue vs SanDisk Ultra 3D vs Samsung 870 EVO
- Why LLM Reasoning Still Happens in Words, Not Vectors
- Sound Blaster Audigy FX in a Period-Correct WinXP Build: 2026 Install and Tuning Guide
- Best SSD for the Steam Deck and Handheld PCs (2026)
- AI-Assisted Voodoo Driver Surgery on Windows 98
- Adding a Sound BlasterX G6 to a Windows 98/XP Retro Gaming PC
- Sound Blaster X G6 on a Win98 + Voodoo3 Build: Period-Correct Audio That Beats On-Board
- RTX 5070 Ti vs RTX 5080: Is the $400 Step-Up Worth It at 1440p and 4K?
- Why NVIDIA's New AI Servers Use Hot-Tub Coolant
- 3dfx Voodoo2 SLI in 2026: Building a Period-Correct Windows 98 Glide Rig
- Dual RTX 3060 12GB: 24GB of VRAM for GLM-5.2 on a Budget?
- 48GB vs 64GB DDR5 for Gaming and AI: Worth It?
- Aider vs Cline vs Continue on a Local Coding Rig (RTX 3060, 2026)
- Forza Horizon 6 on the Steam Deck: Settings, Frame Pacing, and the SSD Question
- Qwen3.6 27B on a 12GB GPU: Quantization, Context, and Real-World Tok/s
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Homelab and Virtualization Box in 2026
- Black Friday Monitor Deals 2026: 5 Picks for Gaming and AI Desks
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090