Skip to main content
AMD Wraith Stealth Socket AM4 4-Pin Connector CPU Cooler with Aluminum Heatsink & 3.93-Inch Fan (Slim)

AMD Wraith Stealth Socket AM4 4-Pin Connector CPU Cooler with Aluminum Heatsink & 3.93-Inch Fan (Slim)

Bottom line: The AMD Wraith Stealth Socket AM4 4-Pin Connector CPU Cooler: Genuine AMD part for Socket AM4 - no adapter bracket or aftermarket mounting kit needed; main trade-off: aluminum fin stack with no heatpipes - little headroom for overclocking or high-TDP chips.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar cooling & fans

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ Genuine AMD part for Socket AM4 - no adapter bracket or aftermarket mounting kit needed
  • ✓ Thermal paste pre-applied to the copper core base, so it mounts as shipped
  • ✓ Slim profile clears tall RAM and fits mini-ITX and low-clearance HTPC cases
  • ✓ 4-pin PWM lead lets the motherboard ramp fan speed with CPU temperature

Cons

  • ✗ Aluminum fin stack with no heatpipes - little headroom for overclocking or high-TDP chips
  • ✗ Listing states fan size three ways (3.93in, 3.81in, 90mm); verify before a tight build
  • ✗ AM4 only - no AM5, Intel LGA, or Threadripper mounting support listed
  • ✗ Small slim fan must spin faster to move air, so it is more audible under sustained load

Manufacturer description

The AMD Wraith Stealth is the low-profile stock cooler AMD ships in the box with many Ryzen processors, offered here as a genuine AMD-branded replacement for Socket AM4 builds. It pairs an aluminum heatsink with a copper core base and arrives with thermal paste already applied, so it mounts straight out of the box with no separate tube to buy. Installation is direct screw mounting into the AM4 motherboard's existing standoffs rather than a clip-on bracket kit. The 4-pin PWM connector, on a lead roughly 9 inches long, lets your board scale fan speed to CPU temperature instead of running the…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored AMD Wraith Stealth Socket AM4 4-Pin Connector CPU Cooler using a rating × review-volume × price-fit model applied to published specs and reviews across the cooling & fans category. Compare with similarly-priced alternatives in the cooling & fans category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for cooling & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will the Wraith Stealth fit an AM5 motherboard?

No. This cooler is specified for Socket AM4 only and attaches by direct screw mounting to an AM4 motherboard. AM5, Intel LGA, and Threadripper sockets are not listed as supported.

Do I need to buy thermal paste separately?

No. Thermal paste is pre-applied to the aluminum heatsink's copper core base, so you can install it as shipped. You would only need fresh paste if you remove the cooler and reseat it later.

Is it short enough for a mini-ITX or slim HTPC case?

This is the slim version of the Wraith Stealth, built as a low-profile stock cooler rather than a tower. Exact height is not published on this listing, so measure your case's CPU cooler clearance and check the product listing before ordering.

How loud is it in normal use?

The 4-pin PWM connector lets the motherboard scale fan speed to CPU temperature, so it idles quietly and ramps only under load.

Is this a genuine AMD cooler or a third-party copy?

The listing describes it as an official genuine AMD-branded product - the same Wraith Stealth bundled with many Ryzen processors. It is most often bought to replace a stock cooler missing from a tray or used CPU purchase.

Key Features

  • Supports Motherboard Socket: AM4
  • Aluminum heatsink - Pre-applied thermal paste
  • Direct screw mounting to socket AM4 motherboard
  • 3.5-inch 90mm fan
  • 4-pin PWM power connector (9-inch length, approximate)

Full Specifications

BrandAMD
Model712-000052
CPU SocketSocket AM4
Unit Count1.0 Count
Part Numberpart_B07MFMFL7R
Cooler Heatsink MaterialCopper
Item Dimensions L x W x H1.97"L
Supports Motherboard SocketAM4
Cooler Heatsink CompatibilityAluminum

Ready to buy?

AMD Wraith Stealth Socket AM4 4-Pin Connector CPU Cooler with Aluminum Heatsink & 3.93-Inch Fan (Slim) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Cooling & Fans

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
AMD Wraith Stealth Socket AM4 4-Pin Connector CPU Cooler with Aluminum Heatsink & 3.93-Inch Fan (Slim)
View on Amazon →