QTEATAK
2Pcs PCIe NVMe M.2 2280 SSD Heatsinks Cooler Screwdriver Kit | with Mounting Screws
Bottom line: The QTEATAK 2Pcs PCIe NVMe M.2 2280 SSD Heatsinks Cooler Screwdriver Kit: 6063 aluminum, 200W/mK thermal conductivity, anodized silver finish.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 6063 aluminum, 200W/mK thermal conductivity, anodized silver finish
- ✓ Vertical and horizontal grooves cut 5-20C off M.2 drive temps
- ✓ Low-viscosity thermal pad leaves the SSD warranty label intact
Cons
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored QTEATAK 2Pcs PCIe NVMe M.2 2280 SSD Heatsinks Cooler Screwdriver Kit using a rating × review-volume × price-fit model applied to published specs and reviews across the ssds & storage category. QTEATAK's ssds & storage lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for ssds & storage of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 1. Compatible for laptops and desktop computers. Supports NGFF PCIe NVMe M.2 2280 SSD size: 0.87 x 3.15in. (22 x 80mm), perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970PRO, etc.
- 2. Material: 6063 Aluminum alloy, silver plating, anodic oxidation surface treatment, thermal conductivity of the heatsink: 200W/mK.
- 3. Vertical and horizontal Groove design, greatly increase the heat dissipation area, with 5°C - 20°C cooling effect (Varies depending on the environments), cool your M.2 SSD to a safe temp to avoid overheating and throttling, improve your computer's performance.
- 4. Heat-conducting Silicone Thermal Pad: Soft and good ductility, compatible with uneven surfaces. Low viscosity, no damage to the M.2 SSD warranty label.
- 5. Includes high-quality studs, screws and screwdrivers required for the installation of m. 2 SSDS, providing you with one-stop service.
Full Specifications
| Brand | QTEATAK |
|---|---|
| Model | JF-0040 |
| 2. Material | 6063 Aluminum alloy, silver plating, anodic oxidation surface treatment, thermal conductivity of the heatsink: 200W/mK. |
| Part Number | JF-0040 |
| Mounting Type | Tabletop |
| Cooler Heatsink Material | Aluminum |
| Cooler Heatsink Compatibility | M.2 SSD (2280) |
| 4. Heat-conducting Silicone Thermal Pad | Soft and good ductility, compatible with uneven surfaces. Low viscosity, no damage to the M.2 SSD warranty label. |
Ready to buy?
2Pcs PCIe NVMe M.2 2280 SSD Heatsinks Cooler Screwdriver Kit | with Mounting Screws is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related SSDs & Storage
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Local Video-Gen on 12GB: What an RTX 3060 Does in the Gemini Omni Flash Era
- Panther Lake NPU vs RTX 3060 12GB for Local LLM Inference
- Best Gaming Mice for Competitive FPS in 2026
- Best Sim Racing Wheel for Beginners on PS5 & PC (2026)
- Best Controller for Forza Horizon 6 on PC (2026)
- Best Streaming Setup for Sim Racing in 2026: Cam, Mic, Light
- International Women in Engineering Day 2026: A Beginner's Pi Starting Point
- KDE KWin Gaming Patches 2026: Linux Latency vs Windows
- Best Gaming Mouse for Office Productivity Crossover (2026)
- Best PC Gaming Gear for Console Players Making the Switch in 2026
- Best GPU for Local LLMs Under $400: Why the RTX 3060 12GB Beats the 8GB Trap
- A 180Hz 1440p Gaming Monitor at Entry-Level Pricing — How It Stacks Against Our 4K Picks
- Build a Raspberry Pi Zero Cyberdeck in 2026: Parts, Wiring and a Working BOM
- Noctua NH-U12S vs Cooler Master ML240L: Which Cools a 5800X?
- What Handheld Console Should I Buy in 2026? A Decision Framework
- vLLM 0.21 Adds Intel Arc Support: The Local Stack Widens
- RTX 3060 12GB at 3440x1440: Is It Enough for a 34-Inch Ultrawide?
- Step 3.7 Flash vs Gemma 4 12B: Which Local Model Wins on a 12GB GPU?
- Best Budget AM4 Gaming Build Parts in 2026
- Steam Deck LCD Battery Swollen: Diagnosis & Safe Fix Guide
- Sega Genesis Mini vs SNES Classic: Which Plug-and-Play Console Holds Up in 2026?
- Best Upgrades for a DDR4 Gaming PC in 2026
- Self-Host Jellyfin on a Raspberry Pi 4 8GB: Real Transcoding Numbers
- Best Controller for PC Emulation: 8BitDo Pro 2 vs GameSir G7
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090