Teensy 4.1 (with Pins)
Bottom line: The Teensy 4.1 (with Pins) ($39.98 on Amazon as of 2026-10-30 22:16 UTC): 600 MHz ARM Cortex-M7 outclasses typical 8-bit and 240 MHz microcontroller boards; main trade-off: ethernet PHY needs an external magjack breakout; no RJ45 on the board.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-30. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 600 MHz ARM Cortex-M7 outclasses typical 8-bit and 240 MHz microcontroller boards
- ✓ Header pins arrive pre-soldered, so no iron needed before first upload
- ✓ 4x the flash of the Teensy 4.0 for larger sketches and audio samples
- ✓ Built-in Ethernet PHY enables wired networking without a shield
- ✓ Onboard SD card socket plus USB host port for storage and peripherals
Cons
- ✗ Ethernet PHY needs an external magjack breakout; no RJ45 on the board
- ✗ No onboard Wi-Fi or Bluetooth radio, unlike most ESP32 class boards
- ✗ Pre-soldered pins block flush surface mounting and low-profile enclosures
Manufacturer description
Pre-Soldered Header Pins ARM Cortex-M7 at 600 MHz 4X Larger Flash Memory
SpecPicks Verdict
SpecPicks scored Teensy 4.1 (with Pins) using a rating × review-volume × price-fit model applied to published specs and reviews across the single board computers category. Teensy's single board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for single board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Pre-Soldered Header Pins
- ARM Cortex-M7 at 600 MHz
- 4X Larger Flash Memory
- Provides Greater I/O Capability
- Includes Ethernet PHY, SD Card Socket, and USB Host Port
Full Specifications
| Brand | Teensy |
|---|---|
| Color | Green |
| Model | Teensy 4.1 With Pins Soldered |
| UnitCount | 1 |
| Manufacturer | PJRC |
| ItemPartNumber | TEENSY41_PINS |
Hardware benchmark data
Ready to buy?
Teensy 4.1 (with Pins) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-30. Price and availability subject to change.
Read our analysis
SpecPicks coverage that features this Single Board Computer.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Inside the Creative Katana V2X Soundbar Teardown — and What It Says About Sound Blaster
- OpenAI Names Its Biggest Data Center Yet, With NVIDIA Backing: What It Means
- Raspberry Pi 5 8GB Review (2026): Still the SBC to Beat
- Best GPU for Local Stable Diffusion at 1080p/1440p in 2026
- Samsung 27" 1440p 240Hz Gaming Monitor Drops to $169 in 2026 Deal
- Best Gaming Monitor for 2026: 5 Picks from 1440p to 4K
- Intel Arc Stable Diffusion Benchmark: A770, B580 & B60 (2025)
- DeepCool AK620 vs Noctua NH-U12S for the Ryzen 7 5800X
- Can You Build an $800 Gaming PC in 2026? Parts + Cost
- Ryzen 5 5600G APU for Local LLM Inference in 2026: What You Can Actually Run
- Raspberry Pi vs AMD GPUs for Local LLMs: What the Specs Show
- Forza Horizon 6 Runs Smooth on Steam Deck — the Dock-and-Settings Combo
- Gemma 4 31B Heretic Finetune: Can It Run on a 12GB RTX 3060?
- 3dfx Voodoo5 5500 PCI Boots in a Modern ASUS Z77 Board
- PCIe Gen2/Gen3 1:2 Analog MUX: Practical Maker Implementation
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5080
- Best Budget AMD Gaming PC Upgrades in 2026: 5 Parts That Move the Needle
- Qwen 0.8B AI Detectors: Fine-Tuned on Pangram-Style Data
- Best Budget SSDs for Gaming PCs and Consoles in 2026
- Logitech G502 Hero vs HyperX QuadCast 2 S vs Elgato Cam Link 4K: Building a Sub-$300 Streaming Starter Kit
- Best Budget AM4 CPU for a 2026 AI + Gaming Build: 5800X vs 5700X vs 5600G
- 1440p High-Refresh vs 4K for Gaming in 2026: ASUS TUF 27" QHD vs SANSUI/KOORUI 4K
- Open WebUI on a Raspberry Pi 4: A Self-Hosted LLM Front-End That Sips Power
- KOORUI 4K QD-Mini LED vs Samsung Odyssey 4K: Best 27-Inch Gaming Monitor?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090