icepc M.2 Heatsink for PS5 PCI-E NVME 2280 SSD Graphene Coating Copper Heat Sink
Bottom line: The icepc M.2 Heatsink: Graphene-coated copper base, not bare aluminum like budget coolers; main trade-off: adhesive pad makes clean removal and reuse difficult.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Graphene-coated copper base, not bare aluminum like budget coolers
- ✓ Fits 2280 NVMe drives: SN750, 970 EVO, 960 PRO, PM981
- ✓ Low 4mm profile suits PS5, laptops, and tight M.2 slots
- ✓ Tool-free install via pre-applied thermal adhesive pad
Cons
- ✗ Adhesive pad makes clean removal and reuse difficult
- ✗ 4mm height may still foul some PS5 slot covers
- ✗ 5300 W/m·K figure is a lab spec, not real-world SSD cooling
- ✗ No screws or clips; mounting relies solely on the sticky pad
Manufacturer description
Welcome to icepc.Product Features:Graphene is the most efficient heat conductor in the world,Its thermal conductivity can reach 5300W/m·K, pure copper only 386.4W/m·K and aluminum only 237 2W/m·K. You can use the temperature software to test the temperature before and after installation, you will find that it is more efficient than other radiators. When the computer temperature drops, the computer will crash less and run more smoothly and more durable.Type: Chute design, increase the heating cooling area. The bottom polishing technology is seamless and will leave no gap. It is suiatble for…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for icepc M.2 Heatsink, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the ssds & storage category before committing. On the listing's own facts, the case for it is "Graphene-coated copper base, not bare aluminum like budget coolers"; the main trade-off is "Adhesive pad makes clean removal and reuse difficult". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for ssds & storage of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Graphene is the most efficient heat conductor in the world,Its thermal conductivity can reach 5300W/m·K, pure copper only 386.4W/m·K and aluminum only 237 2W/m·K. You can use the temperature software to test the temperature before and after installation, you will find that it is more efficient than other radiators.
- M.2 Heatsinks : for 2280 size (22x80mm) M.2 NVME SSD, like SN750, 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970PRO,PM981 etc.
- This radiator is suitable for Laptop and some narrow spaces, and through the professional air duct design, it increases the contact area with air for heat exchange, and it can dissipate heat more quickly.
- The slanted slot design provides a more aesthetically pleasing installation display.The adhesive thermal pad enables you to fix the radiator on SSD easily without any tools.
- Please remove the blue protective layer on the back of the radiator before use.
Full Specifications
| Brand | icepc |
|---|---|
| Model | ICEPC0016-4.0 |
| Dimensions | 70x20x4.0mm |
| Unit Count | 1.0 Count |
| Part Number | ICEPC0001-4.0 |
| Compatibility | PC, PS5 |
| M.2 Heatsinks | for 2280 size (22x80mm) M.2 NVME SSD, like SN750, 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970PRO,PM981 etc. |
| Cooler Heatsink Material | Copper |
| Item Dimensions L x W x H | 2.76"L x 0.79"W x 0.16"H |
| Full listing title | M.2 Heatsink for PS5 PCI-E NVME 2280 SSD Graphene Coating Copper Heat Sink, High Performance SSD Radiator with Thermal Conductive Adhesive for Laptop PC 2280 NGFF Cooler(70x20x4.0mm) |
Ready to buy?
M.2 Heatsink for PS5 PCI-E NVME 2280 SSD Graphene Coating Copper Heat Sink, High Performance SSD Radiator with Thermal Conductive Adhesive for Laptop PC 2280 NGFF Cooler(70x20x4.0mm) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related SSDs & Storage
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Self-Host Jellyfin on a Raspberry Pi 4 8GB in 2026
- 3dfx Voodoo5 5500 AGP tuning guide — 2026 edition
- OpenAI Codex Now Repeats a Task After Watching Once — Local Agentic Alternatives
- Can Local LLMs Actually Do Anything Useful?
- Complete Ollama Installation Guide for 2026: Hardware & Software Setup
- SATA/IDE to USB Adapters in 2026: FIDECO vs Unitek vs Vantec for Retro PC Data Recovery
- RTX 5090 vs. M5 Max 128GB for Agentic Dev (2026)
- How to run Qwen 3 14B on Apple M4 Pro
- Xbox Mode's PC Performance Boost Favors Nvidia GPUs
- Sound Blaster Audigy 2 ZS Won't Install on Windows XP: Driver Hunt + Fix
- Samsung 870 EVO vs Crucial BX500: Best Budget SATA SSD for a Secondary or Retro Build in 2026
- AI-Driven Driver Install for Win98: Vision-LLM + 3060 12GB Build (2026)
- Is an RTX 3060 Enough for 4K Gaming? Pairing It With a Budget 4K Monitor
- How Secure Is My Homelab Compared to Big Companies?
- Best SATA SSDs for Reviving an Old PC in 2026
- Is the RTX 3060 12GB Still Worth It for 1080p Gaming in 2026?
- Qwen 3.6 27B GGUF: BF16 vs Q4_K_M vs Q8_0 Compared
- Raspberry Pi LLM Cluster: What It Can (and Can't) Do
- Best Budget Streaming & Content-Creation Gear in 2026: 5 Picks That Punch Above Their Price
- Why You Shouldn't Leave Model Selection on Default in Copilot, Gemini, and Other AI Tools
- What Rig Runs an AI Agent Locally? Building for the Agent Era
- Samsung Winds Down Memory Output Before 18-Day Strike — SSD Price Watch
- Local LLM Agent Infrastructure: 2026 Hardware Guide
- Best Controller for PC Emulation: 8BitDo Pro 2 vs GameSir G7
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090