ESD Mat Kit - Anti-Static Table Mat - Heat Resistant Soldering Mat - with a Wrist Strap and Dual Common Point Grounding (30" x 96" (2.5' x 8'), Gray)
Bottom line: Per its Amazon listing, the ESD Mat Kit - Anti-Static Table Mat - Heat Resistant Soldering Mat -: top Dissipative Layer (0.5mm thickness), Bottom Conductive Layer (1.5mm thickness); total Thickness: 2MM.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1.
- ✓ Backed by Scientific Americas's warranty and support channels
Cons
- ✗ Check battery runtime and RPM/CFM specs match your case size and cleaning frequency
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Product Details:Durable and high quality mat with heat, chemical, and wear-resistance. The design features two layers of natural rubber.What is ESD?Static, formally referred to as electrostatic charge, arises from excess of electrons on one surface and a deficiency on the other.The imbalance of electrons thus causes an electrical field that is capable of influencing other objects at a distance.The charge will remain in place unless it has a path through which it can flow. It may remain in place for some time and this gives rise to the term "static electricity".The word static simply means…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for ESD Mat Kit - Anti-Static Table Mat - Heat Resistant Soldering Mat…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1.
- Top Dissipative Layer (0.5mm thickness), Bottom Conductive Layer (1.5mm thickness). Total Thickness: 2MM
- Resistance: RTT: 3.8 x 10^6Ω to 1 x 10^8Ω, RTG: 2.4 x 10^7Ω to 1 x 10^8Ω, Surface: <10^4Ω to <10^7Ω.
- Heat resistance (600oF, 10 sec no smell, no melt).
- Heat resistance (600oF, 10 sec no smell, no melt).
Full Specifications
| Brand | Scientific Americas |
|---|---|
| Resistance | RTT: 3.8 x 10^6Ω to 1 x 10^8Ω, RTG: 2.4 x 10^7Ω to 1 x 10^8Ω, Surface: <10^4Ω to <10^7Ω. |
Ready to buy?
ESD Mat Kit - Anti-Static Table Mat - Heat Resistant Soldering Mat - with a Wrist Strap and Dual Common Point Grounding (30" x 96" (2.5' x 8'), Gray) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- ASUS TUF 27" 1440p vs Samsung Odyssey G5 32": Best High-Refresh Esports Monitor
- SATA SSD vs NVMe for a Ryzen 5 5600G Budget Build in 2026
- Old RAM Identification: Decode Part Numbers & Specs
- MAYFLASH F300 vs DualSense for PC Rhythm Games (2026)
- RTX 3060 12GB for ComfyUI & Stable Diffusion: The VRAM Budget Pick (2026)
- Modder Runs a Counter-Strike Clone at 60 FPS on the Original PSP
- Active Unreal Tournament 99 Servers in 2026: Find, Join, Host
- Ryzen 5 5600X vs Ryzen 5 5600G for CPU-Only Gemma 3 12B
- Best GPU for Running Llama 8B Under $300 in 2026
- MCL8080+ Squeezes an Intel 8080 Emulator into an ATtiny85
- AMD Ryzen AI Max 400 'Gorgon Halo': What 192GB of Unified Memory Unlocks for Local AI
- Gemini 3.6 Flash vs 3.5 Flash-Lite: Cloud Tier or Local RTX 3060?
- MSI RTX 3060 Ventus 2X vs ZOTAC RTX 3060 Twin Edge: Which $300 1080p GPU Wins in 2026?
- Best Streaming Starter Kit for Creators in 2026
- Blue Yeti vs HyperX QuadCast 2 S: Which USB Mic Wins for Streaming in 2026?
- NVK Open-Source Vulkan Driver Gains Experimental DLSS on Linux
- OpenAI and Anthropic Are Giving Startups Free Compute — Here's the Local Rig That Replaces It
- ComfyUI on a 12GB GPU: SDXL and Flux Setup, VRAM Limits, and Real Throughput
- Open-Source Layer Brings Reflex and Anti-Lag 2 to All GPUs
- Best Budget Gaming PC Build 2026: AMD Parts Guide
- Best SSD for PS4 Pro Upgrade in 2026: SATA Picks That Actually Cut Load Times
- Best CPU Cooler for High-TDP Builds (2026)
- Best Microphones for Streaming and Podcasting (2026)
- RTX 3060 12GB vs GTX 1050 Ti: What a 4GB Card Runs in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090