Skip to main content
Thermalright ARGB Fan HUB Controller Support 8 Groups of Fans, 8-Port 3 Pin PC Fan Controller, 5V Fan Hub, Strong Paste (Fan HUB ARGB REV×10)
Thermalright

Thermalright ARGB Fan HUB Controller Support 8 Groups of Fans

Bottom line: The Thermalright ARGB Fan HUB Controller Support 8 Groups of Fans: Splits one motherboard 3-pin 5V ARGB header into 10 daisy-free ports; main trade-off: no 12V 4-pin RGB support, so older RGB fans will not connect.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ Splits one motherboard 3-pin 5V ARGB header into 10 daisy-free ports
  • ✓ Compact 90 x 46 x 16mm board weighs just 50g, tucks behind most trays
  • ✓ SATA-powered for stable output when all 10 ARGB devices run at once
  • ✓ Includes strong double-sided adhesive for tool-free chassis mounting

Cons

  • ✗ No 12V 4-pin RGB support, so older RGB fans will not connect
  • ✗ SATA power cable is not included and must be sourced separately
  • ✗ Hub only splits signal, it cannot change or set light colors
  • ✗ Adhesive mounting only, with no screw holes or magnet option listed

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Thermalright ARGB Fan HUB Controller Support 8 Groups of Fans, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. On the listing's own facts, the case for it is "Splits one motherboard 3-pin 5V ARGB header into 10 daisy-free ports"; the main trade-off is "No 12V 4-pin RGB support, so older RGB fans will not connect". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • 【High performance cable management】Product for the ARGB lighting signal hub, while supporting the installation of 10 ARGB fans, each side of the five lighting interfaces, a plug available, can keep the ARGB fan lighting cable line neat (Note: does not support 12V 4PIN RGB interface devices, can not be inserted)
  • 【Stable Output】ARGB light synchronizer is SATA power direct output, in the state of high load, can maintain stable output, compact size, top surface with Thermalrigh engraved logo, overall colour, stable function(Note: This product requires a separate SATA cable, which is not included with the product.)
  • 【Support ARGB light effect】Support ARGB fan, ARGB light bar and other devices with light, after connecting to the motherboard, you can achieve 3PIN 5V light interface light effect synchronization.(Note: This product is a hub for ARGB lighting fans and does not have the ability to adjust the colour of the lights.)
  • 【Convenient Installation】Configured with strong double-sided stickers, you can fix the ARGB HUB hub to the right chassis position according to your needs, simple and safe to install according to the instructions.
  • 【Specifications】Model: ARGB HUB Controller Rev. A, Size: 90 x 46 x 16mm, Material: Plastic, Colour: Colour, Weight: 50g, easy solution to the lack of ARGB light connector on the motherboard(Note: The product supply voltage is 12V, support 5V ARGB 3PIN fan light interface connection.)

Full Specifications

BrandThermalright
ModelFAN-ARGB HUB-Controller REV.A-D6
Weight50g
Voltage12 volts
Wattage5 watts
MaterialSilicone
Dimensions90 x 46 x 16mm
Unit Count1 Count
Noise Level20 db
Part NumberFAN-ARGB HUB-Controller REV.A-D6
CompatibilityPC
Material TypeSilicone
Cooling MethodAir
Number of Items1
Compatible DevicesDesktop
Included ComponentsHUB
Power Connector Type3-Pin
Item Dimensions L x W x H3.54"L x 1.81"W x 0.63"H
Full listing titleThermalright ARGB Fan HUB Controller Support 8 Groups of Fans, 8-Port 3 Pin PC Fan Controller, 5V Fan Hub, Strong Paste (Fan HUB ARGB REV×10)

Ready to buy?

Thermalright ARGB Fan HUB Controller Support 8 Groups of Fans, 8-Port 3 Pin PC Fan Controller, 5V Fan Hub, Strong Paste (Fan HUB ARGB REV×10) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related RGB & Lighting

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →