Tokluck Controller Charging Dock for PS5 VR2
Bottom line: The Tokluck Controller Charging Dock for PS5 VR2 ($23.99 on Amazon as of 2026-10-07): Charges both PS VR2 Sense controllers at once in about 1.5-2 hours; main trade-off: does not charge the PS VR2 headset itself, only the two controllers.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Charges both PS VR2 Sense controllers at once in about 1.5-2 hours
- ✓ Doubles as a headset display stand, keeping the whole VR2 kit in one spot
- ✓ Magnetic Type-C dongles snap controllers into the charging slots
- ✓ LED status: breathing orange while charging, steady blue when full
- ✓ Powered by the PS5 via the included Type-C cable or any 5V/2A adapter
Cons
- ✗ Does not charge the PS VR2 headset itself, only the two controllers
- ✗ Magnetic dongles must be inserted into each controller before docking
- ✗ No latch between base and rod; lifting by the rod can pull it apart
- ✗ Wall adapter not included; needs a PS5 USB port or your own 5V/2A brick
Manufacturer description
The Tokluck PSVR2 Charging Dock charges both PS VR2 Sense controllers and gives your headset a place to sit, so your whole VR2 kit lives in one small spot on the desk. Charging both controllers at the same time takes about 1.5 to 2 hours. Charging is magnetic. You plug a Type-C magnetic dongle into each Sense controller once. After that, set the controllers into their slots and the built-in magnets line up the contacts for you. An LED on the dock shows the charging status. A breathing orange light means a controller is charging. Steady blue means it is fully charged or on standby. The dock…
SpecPicks Verdict
SpecPicks scored Tokluck Controller Charging Dock for PS5 VR2 using a rating × review-volume × price-fit model applied to published specs and reviews across the vr headsets & accessories category. Tokluck's vr headsets & accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for vr headsets & accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Does the Tokluck PSVR2 dock charge the VR2 headset too?
No. It charges only the two PS VR2 Sense controllers. The headset just rests on the stand for display and storage.
How long does it take to fully charge both PS VR2 controllers?
About 1.5 to 2 hours to fully charge both controllers at the same time.
Can I power the dock from my PS5?
Yes. It runs on 5V/2A power. Use the included Type-C cable to connect it to your PS5 console, or plug it into your own 5V/2A wall adapter.
How do the controllers connect to the charging dock?
First, plug a Type-C magnetic dongle into each Sense controller. Then set each controller gently into its slot. The built-in magnets line up the charging contacts.
What do the LED colors on the dock mean?
A breathing orange light means the controllers are charging. A steady blue light means they are fully charged or the dock is on standby.
Key Features
- PSVR 2 Controller Charger Dock Station - The PS5 VR 2 charging dock is specifically designed with PSVR2 controller, which can charge for dual controllers at the same time and is powered by multiple supply devices (5V 2A), such as PS5 console (Type-C cable included) or 5V/2A wall adapter. Noted that Tokluck PS VR2 stand only charges for controllers, not VR headset.
- Detachable VR2 Headset Display Stand - It is not only PS VR2 controller charging station, but it also can be used as VR2 headset holder. Our PSVR2 controller charging station keeps your all PS VR2 accessories in one place and can say goodbye to your cluttered desk. Detachable design can meet with the need of customers to carry out easily or store various place. If you would like to move PS VR2 dock to another place, we recommend to hold the PSVR2 base rather than grabbing the middle rod.
- Magnetic Charging - Built in strong magnet automatic alignment, PS VR2 charging base dock is convenient to charge with magnetic contector, making plugging in a breeze. Before charging, you need to insert type-c magnetic dongles into PS VR 2 sense controller firstly, and then place PS VR2 controllers to the charging slot gently.
- Fast Charging & LED Indicators - This charging dock for PSVR 2 need 1.5-2 hours to fully charge dual controllers. PS5 VR2 controller charging stand with clear LED indicator will let you know the charging status easily. Steady blue light indicates controllers are fully charged or standby. Breathing orange light indicates charging.
- Easy Installation & Space Saving - Simple installation without other tools needed. This charging station for PSVR2 is essencial accessory for PS VR2, charging 2 controllers and storing VR headset in one PS VR2 dock which only takes up little space and keep your gaming accessories organized. When moving PSVR2 charging station, please hold up the base rather than holding the middle rod to move due to no latch between base and rod.
Full Specifications
| Brand | Tokluck |
|---|---|
| Color | White Dock |
| Current | DC |
| Wattage | 5 watts |
| Amperage | 2 A |
| Plug Type | Type C - European |
| Power Plug | No Plug |
| Unit Count | 1 Count |
| Form Factor | Even with stand |
| Model Number | TP5-2515 |
| Power Source | Corded Electric |
| Compatibility | PS5 |
| Input Voltage | 5 volts |
| Mounting Type | Tabletop Mount |
| Built-In Media | 1 x PSVR 2 Charging Station, 1 x Supporting Rod, 1 x Type-C Charging Cable, 1 x VR2 Headset Holder, 2 x Type-C Magnetic Connector |
| Connector Type | USB Type C |
| Output Current | 2 A |
| Output Voltage | 5 volts |
| Mfr Part Number | TP5-2515 |
| Number of Items | 1 |
| Full listing title | Controller Charging Dock for PS5 VR2, PSVR 2 Charging Station with VR Headset Holder Display Stand, PS VR2 Controller Charger for PSVR2 Accessories with Led Indicator, 2 Magnetic Clasp & Type-C Cable |
Ready to buy?
Controller Charging Dock for PS5 VR2, PSVR 2 Charging Station with VR Headset Holder Display Stand, PS VR2 Controller Charger for PSVR2 Accessories with Led Indicator, 2 Magnetic Clasp & Type-C Cable is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related VR Headsets & Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Homelab and Virtualization Box in 2026
- Best Budget GPU for Local LLMs in 2026: RTX 3060 12GB Still Wins
- Aider vs Cline vs Continue.dev for Local Coding on an RTX 3060 (2026)
- Raspberry Pi 4 8GB as a 2026 Home Server: What Actually Runs Well
- Hands-On: Asus ROG Harpe II Extreme Edition 20 Gaming Mouse
- llama.cpp Vulkan on the RTX 3060 12GB: Setup and Measured tok/s for 2026
- ASUS ROG Crosshair 2006 X870E: A Retro-Styled AM5 Mobo for ROG's 20th Anniversary
- Best Gaming SSD in 2026: 5 Picks for PS5, Steam Deck, and Custom Builds
- Best Capture Setup for Console Streaming in 2026: Elgato Cam Link 4K + PS4 Pro
- Best Raspberry Pi Heatsink and Cooling Kits for Pi 5 in 2026
- Best Budget PC Upgrades Under $200 in 2026: 5 Picks That Move the Needle
- Cyberdeck Raspberry Pi 4/5 Mini Music Workstation Build Guide
- Building a Budget Sim Racing Setup: Logitech G920 vs Thrustmaster TH8A Shifter
- Sub-$300 4K Mini-LED Gaming Monitors Hit the Mainstream
- Best PC Controllers for Cross-Platform Gaming in 2026
- Ideogram 4.0 Open Weights: Running Text-to-Image on a 12GB GPU
- PebbleOS Comes to the Raspberry Pi RP2350: What the Port Means for Tinkerers
- Best PC Gaming Controller 2026: GameSir G7 SE vs 8BitDo Pro 2 vs Sony DualSense
- Raspberry Pi 5 IOMMU Support Is Landing in the Mainline Linux Kernel
- Troubleshooting Ryzen 5 5600X No-POST: Memory, BIOS, and Cooler Mount Fixes (2026)
- How to run Qwen 3 14B on Arc B580
- Pro-Level 180Hz 1440p Gaming Monitor for $159: Gigabyte Deal
- RTX 3060 12GB at 3440x1440: Is It Enough for a 34-Inch Ultrawide?
- Ex-Sega Engineer Builds a 'Super-Realistic' CRT Emulator
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090