WALI Triple Monitor Wall Mount for 17 to 32 inch Screens
Bottom line: The WALI Triple Monitor Wall Mount for 17 to 32 inch Screens ($69.99 on Amazon as of 2026-11-20 11:26 UTC): Holds three 17-32 inch monitors, up to 15.4 lbs per arm; main trade-off: wall-only mount; no desk clamp or freestanding option.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Holds three 17-32 inch monitors, up to 15.4 lbs per arm
- ✓ VESA 75x75 and 100x100mm compatible for most screens
- ✓ Full motion: tilt, swivel, 360 rotation, portrait or landscape
- ✓ Telescoping arms extend for ultrawide monitors, flush to wall
- ✓ Mounts to concrete, brick, or wood stud; cable clips included
Cons
- ✗ Wall-only mount; no desk clamp or freestanding option
- ✗ Caps at 32 inch and 15.4 lbs per arm, not larger panels
- ✗ Needs drilling into concrete, brick, or stud to install
- ✗ Sold in black only; no silver or white finish choice
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for WALI Triple Monitor Wall Mount for 17 to 32 inch Screens, so this read rests on the manufacturer's listed specs and the current price in the home & kitchen category (how we evaluate). Compare with similarly-priced alternatives in the home & kitchen category before committing. On the listing's own facts, the case for it is "Holds three 17-32 inch monitors, up to 15.4 lbs per arm"; the main trade-off is "Wall-only mount; no desk clamp or freestanding option". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, load rating and mounting or device compatibility in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Compatibility: Fits regular monitor screens up to 32", and 15.4 lbs in weight (each) with mounting holes 75x75mm or 100x100mm. Heavy-duty wall mount fits concrete, brick wall, wood stud
- Fully adjustable: Adjustable installation provides a comfortable viewing Angle of forward and backward tilting, up and down rotation, and 360° rotation. The monitor can be placed in either the vertical or horizontal direction
- Unique Design: Heavy duty arms adjust in length to fit larger, ultra-wide monitors. Telescoping design expands arms straight outwards, creating a clean, flush-to-wall setup. The arms slide into each other for added strength and stability
- Save Desk Space: Protect your equipment and clear room on your desktop by getting your screens conveniently mounted to the wall at an ideal height. Cable clips are provided to route cords for an organized appearance
- Package Includes: 1 x WALI Triple Monitor Wall Mount (Black), Mounting Hardware Kit, User Manual, experienced and friendly US based customer support available to assist 7 days a week
Full Specifications
| Brand | WALI |
|---|---|
| Color | Black (Triple) |
| Material | Metal |
| Model Number | 013arm |
| Mounting Type | Wall Mount |
| Movement Type | Articulating |
| Mfr Part Number | 013arm |
| Number of Items | 1 |
| Number of Packs | 1 |
| Compatible Devices | Monitor |
| Enclosure Material | Metal |
| Maximum Tilt Angle | 45 degrees |
| Warranty Description | 10 Years Warranty |
| Maximum-Supported Screen Size | 32 inches |
| Minimum-Supported Screen Size | 17 inches |
| Full listing title | WALI Triple Monitor Wall Mount for 17 to 32 inch Screens, up to 15.4lbs | 3 Monitor Wall Mount, Full Motion with Tilt, Swivel, Rotation, VESA Mount 75/100mm, for Office / Home (013ARM), Black |
Ready to buy?
WALI Triple Monitor Wall Mount for 17 to 32 inch Screens, up to 15.4lbs | 3 Monitor Wall Mount, Full Motion with Tilt, Swivel, Rotation, VESA Mount 75/100mm, for Office / Home (013ARM), Black is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Home & Kitchen
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- RetroPie Handheld 3D Print Guide: Cases, Settings & Parts
- Raspberry Pi Zero W vs Pi 4 for a 2026 Cyberdeck: Which Board Fits?
- Can the Ryzen 5 5600G Game at 1080p Without a Graphics Card in 2026?
- GameSir G7 SE vs DualSense for PC Emulation in 2026
- Best Gaming Controllers for PC in 2026: 5 Picks Tested Across Genres
- Best Webcam for Twitch Streaming Under $100 in 2026
- Best Raspberry Pi 5 Projects and Kits for 2026
- Resident Evil Code: Veronica on a CRT — Why It Still Hits Different
- Minecraft on Raspberry Pi via Vulkan: 2026 Setup Guide
- Best Controller for Emulation and Fighting Games in 2026
- Best Budget AM4 CPU for a 2026 AI + Gaming Build: 5800X vs 5700X vs 5600G
- Qwen 3.8 Open Weights on a 12 GB RTX 3060: What Actually Fits
- Used RTX 3090 Home AI Rig Build: Parts, Real Speeds and November 2026 Prices
- Ryzen 7 5800X vs 5700X vs 5600G for a Budget Local-LLM Rig
- Using a Raspberry Pi 5 with AI to Recover Lost Windows 98 INF Files (2026)
- GameSir G7 SE vs 8BitDo Pro 2: Best Wired-Feel Controller for PC & Steam Deck
- 1-Trillion-Param LLM on 768GB of Optane vs a 12GB RTX 3060: What's Practical
- Build a Jellyfin Media Server on a Raspberry Pi 4 8GB in 2026
- Noctua NH-U12S vs Cooler Master ML240L RGB for a Ryzen 7 5800X gaming build: which cooler actually holds…
- RTX 3060 12GB vs Ryzen 9 3900X for Qwen2.5 14B: GPU or CPU in 2026?
- Self-Hosted Home Assistant on a Raspberry Pi 4 8GB (2026 Build)
- Plug-and-Play Retro Consoles Compared: Genesis Mini vs SNES vs NES Classic
- RTX 4090 AIO Kit 2025: Pricing, Cooling & Buying Guide
- IPEX-LLM + Ollama vs a CUDA RTX 3060 Rig
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090