Mount-It!
Mount-It! Dual Monitor Desk Stand Mount for 2 Screens VESA 75x75 & 100x100
Bottom line: The Mount-It! Dual Monitor Desk Stand Mount: Holds two screens up to 32 inches and 19.8 lbs per arm; main trade-off: freestanding base uses more desk depth than clamp mounts.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Holds two screens up to 32 inches and 19.8 lbs per arm
- ✓ Freestanding weighted base needs no desk clamp or drilling
- ✓ Full-motion tilt, swivel, and rotation on each arm
- ✓ Detachable VESA 75x75 and 100x100 plates speed up install
- ✓ Built-in phone slot in the base keeps your device in reach
Cons
- ✗ Freestanding base uses more desk depth than clamp mounts
- ✗ 19.8 lb per-arm limit rules out heavy 34-inch ultrawides
- ✗ Weighted base occupies usable desk space behind the screens
- ✗ White finish shows dust and scuffs more than a black mount
SpecPicks Verdict
SpecPicks scored Mount-It! Dual Monitor Desk Stand Mount using a rating × review-volume × price-fit model applied to published specs and reviews across the home & kitchen category. Mount-It!'s home & kitchen lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for home & kitchen of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Computer Monitor Stands for 2 Monitors: The Mount-It! Dual Monitor Stand securely supports two large screens up to 32 inches and 19.8 pounds each.
- Dual Monitor Desk Mount Free-Standing Design: With a freestanding base, this dual monitor mount offers the flexibility to set up your workspace anywhere.
- Full Motion Adjustability: Achieve your perfect viewing angle with full motion adjustments on this dual screen stand.
- Convenient Installation and Cable Management: Setting up your two screen monitor stand workspace is streamlined with detachable VESA plates supporting 75x75 and 100x100 patterns.
- Built-In Phone Slot and Quality Guarantee: Keep your smartphone within easy reach thanks to a handy built-in slot in the base of this freestanding dual monitor stand.
Full Specifications
| Brand | Mount-It! |
|---|---|
| Color | White |
| Material | Alloy Steel |
| Model Number | MI-4781WHT |
| Mounting Type | Freestanding Desktop |
| Movement Type | Articulating |
| Item Highlight | Fits two VESA 75x75/100x100 screens, sturdy desk stand for a clean dual-monitor workstation. |
| Number of Items | 1 |
| Compatible Devices | Monitor |
| Enclosure Material | Alloy Steel |
| Maximum Tilt Angle | 45 degrees |
| Warranty Description | Lifetime |
| Full Motion Adjustability | Achieve your perfect viewing angle with full motion adjustments on this dual screen stand. |
| Maximum-Supported Screen Size | 17 inches |
| Minimum-Supported Screen Size | 32 inches |
| Computer Monitor Stands for 2 Monitors | The Mount-It! Dual Monitor Stand securely supports two large screens up to 32 inches and 19.8 pounds each. |
Ready to buy?
Mount-It! Dual Monitor Desk Stand Mount for 2 Screens VESA 75x75 & 100x100 is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Home & Kitchen
More reviews from the SpecPicks archive
Browse all reviews →- How to Build a $2000 Home AI Rig in 2026: Used RTX 3090 Guide
- Raspberry Pi Zero W Projects for Beginners in 2026
- Best SATA SSD for a 2026 Game Library Drive
- Build a Raspberry Pi Zero Cyberdeck in 2026: Parts, Wiring and a Working BOM
- Modder Runs a Counter-Strike Clone at 60 FPS on the Original PSP
- DeepSeek Seeks More Cash Weeks After $7B Round
- Self-Host Immich Photo Backup on a Raspberry Pi 4 8GB in 2026
- Best Cooler for a Ryzen 7 5800X: ML240L RGB V2 vs Kraken M22
- Self-Hosting Immich on a Raspberry Pi 4 8GB: Power and Performance
- AMD Ryzen AI Halo: A DGX Spark Rival at Mini-PC Size
- Prime Day 2026: Gaming Monitor and Logitech Peripheral Deals to Watch
- Single vs. Dual Channel Memory: Intel Core Ultra 7 270K
- Ryzen AI Max+ 'Gorgon Halo' 192GB vs RTX 3060 12GB for Local LLMs
- Build a Self-Updating 24/7 FM Radio Station on a Raspberry Pi Zero W
- GeForce FX 5900 Ultra vs Radeon 9800 Pro: The 2003 DirectX 9 Showdown Revisited
- AMD Ryzen AI Max+ 'Gorgon Halo' 192GB: What 192GB Unified Memory Means for Local LLMs
- Best AMD Ryzen 5000 CPU for Gaming in 2026: 5 Picks
- Claude Code Telemetry Flap: Why a Local RTX 3060 Rig Is the Privacy Play
- The Pentium III 1 GHz Race: When Intel and AMD Broke the Gigahertz Barrier in the Same Week
- Corsair Launches Lightweight Budget HS35 v3 Gaming Headset
- Late 2000s Windows XP Gaming PC Build: Parts & Setup Guide
- Ryzen 7 5800X vs Ryzen 7 5700X for 2026 Budget Gaming Builds
- ComfyUI for local image generation — the 2026 setup guide
- Build a Wall-Mounted Raspberry Pi 4 Arcade Cabinet: 3D-Printed Case, SSD Boot, Real BOM
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090