Skip to main content
4-Port SATA 3.0 PCIe Expansion Card with Low Profile Bracket
YUNKOZAND

4-Port SATA 3.0 PCIe Expansion Card with Low Profile Bracket

Bottom line: The YUNKOZAND 4-Port SATA 3.0 PCIe Expansion Card with Low Profile Bracket: 4 SATA 3.0 ports rated up to 6Gbps each, usable at the same time; main trade-off: all 4 ports share one PCIe x1 link, which limits total throughput.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ 4 SATA 3.0 ports rated up to 6Gbps each, usable at the same time
  • ✓ Marvell 88SE9215 controller with a heat sink on the chip
  • ✓ x1 card fits PCIe x1, x4, x8 or x16 slots
  • ✓ Ships with 4 SATA data cables, so no extra cable purchase is needed
  • ✓ Low profile bracket and screwdriver included for slim cases

Cons

  • ✗ All 4 ports share one PCIe x1 link, which limits total throughput
  • ✗ No RAID modes listed in the product details
  • ✗ Booting from attached drives is not confirmed in the listing
  • ✗ SATA power leads must come from your PSU; only data cables included

Manufacturer description

The YUNKOZAND 4-Port SATA 3.0 PCIe Expansion Card adds four internal SATA ports to your desktop through a single PCIe slot. It's useful when you've run out of motherboard SATA headers or want to add drive bays to a retro or legacy build. Each port supports SATA 3.0 at up to 6Gbps, and you can connect all four hard drives or SSDs at the same time. The card uses a Marvell 88SE9215 controller, a SATA chipset many PC builders already know. A heat sink sits on the chip to manage heat during long transfers. The card has a PCIe x1 connector, so it also fits x4, x8 and x16 slots. That makes it easy…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for YUNKOZAND 4-Port SATA 3.0 PCIe Expansion Card with Low Profile Bracket, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the expansion cards category before committing. On the listing's own facts, the case for it is "4 SATA 3.0 ports rated up to 6Gbps each, usable at the same time"; the main trade-off is "All 4 ports share one PCIe x1 link, which limits total throughput". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, confirm the board side: this card needs a free PCIe slot of the width the card uses. Your motherboard manual lists which slots share lanes with M.2 sockets or other slots. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

How many drives can I connect to this YUNKOZAND PCIe SATA card?

Up to four. The card has 4 SATA 3.0 ports that can all be used at once, and it comes with 4 SATA data cables. Each drive still needs a SATA power connector from your power supply.

Will this card fit in my PCIe x16 slot?

Yes. It is a PCIe x1 card and the listing says it works in PCIe x1, x4, x8 and x16 slots, so you can use any open slot of those sizes.

Does it work with Windows XP or Linux?

The listing names Windows XP, Server 2003, 7, 8 and 10 in 32- and 64-bit versions, plus Mac and Linux. The card is built on the Marvell 88SE9215 controller, which helps if you need to look up drivers for an older OS.

Can I install it in a small form factor or slim case?

Yes. A low profile bracket comes in the box, along with a small screwdriver for swapping brackets, so the card can go into slim and small form factor desktops.

What speed do the SATA ports support?

Each port is SATA 3.0 rated at up to 6Gbps. All four ports run through one PCIe x1 connection, so total throughput is shared when several drives transfer at the same time.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • ✅【1X PCIE 4 SATA】Provides 4 SATA 3.0 ports and 4 SATA cables, supports simultaneous connection of 4 SATA hard drives, with a transmission speed of up to 6Gbps.
  • ✅【Product chip】Built-in Marvell 88SE9215 chipset, which improves the stability and compatibility of this PCIE to SATA card. This card also has a heat sink for long-lasting high temperature resistance.
  • ✅【Extensive compatibility】Support Windows XP / 2003/7/8/10 (32/64bit) / MAC/ Linux and other operating systems. The PCIE SATA card is compatible with PCIE X1,X4, X8, X16 slots.
  • ✅【Products include】PCIE 1X SATA card 4 ports*1, SATA cable*4, low profile bracket*1, Small screwdriver*1
  • ✅【Reliable Support】Our products have been tested for function and durability, if you have any questions, please feel free to contact us, we will reply you within 12 hours.

Full Specifications

BrandYUNKOZAND
StyleClassic
Style NameClassic
Model NumberYUNKOZAND-PCIE1X-SATA4-9215
CompatibilityMac, Linux
Compatible DevicesPersonal Computer, Laptop
Hardware InterfacePCIE x 1
Warranty Description90 DAY

Ready to buy?

4-Port SATA 3.0 PCIe Expansion Card with Low Profile Bracket is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Expansion Cards

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →