YBBOTT PCIe 10 Ports SATA 3.0 Controller Card
Bottom line: The YBBOTT PCIe 10 Ports SATA 3.0 Controller Card ($45.98 on Amazon as of 2026-10-06): Ten SATA III 6Gb/s ports off a single PCIe x1 slot, ideal for NAS and DAS builds; main trade-off: no hardware RAID support; array duties fall to your OS or software RAID.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Ten SATA III 6Gb/s ports off a single PCIe x1 slot, ideal for NAS and DAS builds
- ✓ ASM1166 plus JMB575 chipset pairing for broader drive and controller compatibility
- ✓ Ships with 10 SATA cables included, so no extra cable purchase needed
- ✓ Drops into x1, x4, x8 or x16 slots; PCIe 2.0 spec with v1.0 backward compatibility
Cons
- ✗ No hardware RAID support; array duties fall to your OS or software RAID
- ✗ Bandwidth is shared, so speeds drop when all 10 drives are active at once
- ✗ Lenovo and Dell boards block third-party SATA controller BIOS; may not be detected
- ✗ Windows 7 is not recommended and may block the card outright
Manufacturer description
System Requirements:Applicable Slots: PCIExpress X1, can be used on PCIe slots X4 / X8 / X16System: Support for Windows 8/10 32/64 bit / MAC 10.14 / NAS / LinuxNot recommended for use with Win 7, may be blocked-Multiple hard drives require sufficient power to prevent "drop channels" "not working" and so on-Using multiple operating systems supports only Windows-You must turn off the power before connecting the SATA PCIe card to the motherboard or remove it-The PCIe X1 10 port SATA 3.0 PCIe controller card provides a simple connection between a host computer and SATA 3.0 devices (SATA hard…
SpecPicks Verdict
SpecPicks scored YBBOTT PCIe 10 Ports SATA 3.0 Controller Card using a rating × review-volume × price-fit model applied to published specs and reviews across the expansion cards category. YBBOTT's expansion cards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for expansion cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- PCIE X1 INTERFACE: This 10 ports SATA expansion card is compatible with PCIE X1, X4, X8, X16, not compatible with PCI slots
- POWERFUL CHIP: Integrated ASM1166 and JMB575 chips, the stability and compatibility of this PCIe to SATA card have been improved; This PCIe SATA card does not support hardware RAID
- CAMPATIBILITY: Supports Win 8/10/MAC/NAS/Ubuntu not recommended for Win 7 use, may be blocked With the YBBOTT 10 ports PCIE SATA card, you can add 10 SATA III 6Gb/s drives for your desktop; Lenovo and Dell computers block the BIOS interface of any third party SATA controller, unpredictable compatibility problems may occur or the SATA card cannot be read
- 10 PORTS SATA CARD: With the 10 ports SATA PCIe card, you can add 10 SATA III 6Gb/s drives for your desktop; Lenovo and Dell computers block the BIOS interface of any third party SATA controller, unpredictable compatibility problems may occur or the SATA card cannot be read
- SPECIFICATION: Compliant with PCI Express v2.0 specification and backward compatible with PCI Express v1.0. If higher speed is required, the motherboard must be PCIe 2.0 or higher; Insert a 10 ports SATA PCIe card into the x16 slot; The actual speed depends on the PCIe bandwidth of the motherboard; If all ports are used at the same time, the speed will slow down
Full Specifications
| Brand | YBBOTT |
|---|---|
| Model Number | YBBOTT-PCE10ST |
| Compatibility | Mac |
| Number of Items | 1 |
| PCIE X1 INTERFACE | This 10 ports SATA expansion card is compatible with PCIE X1, X4, X8, X16, not compatible with PCI slots |
| Compatible Devices | Desktop |
| Hardware Interface | PCI Express 3.0 |
| Warranty Description | 1 Year |
| Full listing title | PCIe 10 Ports SATA 3.0 Controller Card with 10 SATA Cables 6Gbps Expansion Card Compatible with Win 8/10/Ubuntu |
Ready to buy?
PCIe 10 Ports SATA 3.0 Controller Card with 10 SATA Cables 6Gbps Expansion Card Compatible with Win 8/10/Ubuntu is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Expansion Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Modern Retro Console Mods: 2026 Upgrade Guide
- Building a Budget Local-AI Box: Ryzen 7 5800X + RTX 3060 12GB
- Best CPU Coolers for Ryzen 9000 (9800X3D / 9950X3D) in 2026
- Ling 2.6 1T on Local Hardware: Can You Actually Run a Trillion-Parameter Model at Home in 2026?
- The Greatest GPU Awards: A Decade of Standout Cards
- 8BitDo Sn30 Pro vs Pro 2: Best Bluetooth Controller for Raspberry Pi 4 Emulation
- Run a Local LLM on a Raspberry Pi 4 8GB: What Works in 2026
- Handheld Gaming PC Sale: Best 2026 Deals to Buy Now
- 10 Raspberry Pi Projects for Kids to Build in 2026
- How Companies Name Their Monitors: Brand-by-Brand Guide
- Handheld Gaming PCs With a Keyboard: 2025 Guide
- Best CPU Coolers for AMD Ryzen in 2026: 5 Picks Ranked
- Best Streaming Webcam and Mic Setup Under $300 (2026)
- Best CompactFlash and IDE/SATA-to-USB Storage Gear for Retro PC Builds in 2026
- Inkling 975B: Thinking Machines' Open-Weight Speech Model, Explained
- RTX 5080 vs RTX 4090: Which GPU Is Best in 2026?
- Ryzen 5 5600X vs 5700X vs 5800X: Best AM4 Gaming CPU in 2026
- Samsung SSD Brand Guide 2026: Every Drive Worth Buying
- Best Budget CPU for Gaming + Productivity in 2026: The Honest Buying Guide
- NotebookLM Now Runs Code: Self-Hosting the Same Idea on a 12GB GPU
- Raspberry Pi 4 as an SMB1 File Server for Windows 98 Retro Rigs
- Best GPU for ComfyUI and SDXL Under $400 in 2026
- What Handheld Console Should I Buy in 2026? A Decision Framework
- VibeThinker-3B: A 3B Reasoning Model on RTX 3060 and Raspberry Pi 4
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090