WINSINN 40mm Fan 12V LED Blue
Bottom line: Per its Amazon listing, the WINSINN 40mm Fan 12V LED Blue: ✔️WINSINN 40mm LED fan which micro size and lightweight design; the working voltage is 12V.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ ✔️WINSINN 40mm LED fan which micro size and lightweight design
- ✓ The working voltage is 12V
- ✓ Backed by WINSINN's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
►WINSINN 40mm fan 12V Led Blue with blue light, which micro size and lightweight design, make your machine much more cool, suitable for 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place.►Hydraulic Bearings, 2-years WTY. Balance price and performance, suitable for daily use, life: 35,000 Hours.►Rated Voltage: DC 12V, Current: 0.07A, Power: 0.84W , Speed: 5000PRM, Air Pressure: 2.31mmH₂O, Airflow: 5.56CFM, Noise: 22.6dBA►Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm►Widely Used: Compatible with ventilation of Small PC Case / Router /…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for WINSINN 40mm Fan 12V LED Blue, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- ✔️WINSINN 40mm LED fan which micro size and lightweight design, fast and stable cooling, blue Led light when it works, bringing you unparalleled experience. So many 3D Printer and DIY enthusiasts are full of praise for it, and it will also be your best choice. The working voltage is 12V, which perfectly compatible a various 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place.
- ✔️Hydraulic Bearings, 2-years WTY. Balance price and performance, suitable for daily use, life: 35,000 Hours.
- ✔️Rated Voltage: DC 12V, Current: 0.07A, Power: 0.84W , Speed: 5000PRM, Air Pressure: 2.31mmH₂O, Airflow: 5.56CFM, Noise: 22.6dBA
- ✔️Packing List: 5 x 40mm LED Fan 12v, Connector & Line length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm
- ✔️Widely Used: Compatible with ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation.
Full Specifications
| Brand | WINSINN |
|---|---|
| Model | 4010 Fan 12V BLUE |
| Voltage | 12 volts |
| Material | Copper |
| Unit Count | 5 Count |
| Noise Level | 22.6 db |
| Part Number | BFAN401012VHB |
| Compatibility | PC |
| Material Type | Copper |
| Cooling Method | Air |
| Number of Items | 5 |
| Air Flow Capacity | 5.56 cfm |
| ✔️Widely Used | Compatible with ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation. |
| Compatible Devices | Desktop |
| ✔️Packing List | 5 x 40mm LED Fan 12v, Connector & Line length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm |
| ✔️Rated Voltage | DC 12V, Current: 0.07A, Power: 0.84W , Speed: 5000PRM, Air Pressure: 2.31mmH₂O, Airflow: 5.56CFM, Noise: 22.6dBA |
| Power Connector Type | 2-Pin |
| Maximum Rotational Speed | 5000 rpm |
| Item Dimensions L x W x H | 1.57"L x 0.39"W x 1.57"H |
| Full listing title | WINSINN 40mm Fan 12V LED Blue, 3D Printer Micro 12 Volt Fans 4010 Hydraulic Bearing, Brushless Cooling 40mmx10mm 2PIN for DVR PC CPU (Pack of 5Pcs) |
Benchmark data for other processors
Ready to buy?
WINSINN 40mm Fan 12V LED Blue, 3D Printer Micro 12 Volt Fans 4010 Hydraulic Bearing, Brushless Cooling 40mmx10mm 2PIN for DVR PC CPU (Pack of 5Pcs) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Intel Axes BigDL/IPEX-LLM: Where Local Inference Goes Now
- CPU Cooler Bracket Fix: How to Secure Your CPU When It Fails
- What Does DPS Mean in Gaming? Damage Per Second Explained
- Local AI Image Generation: Best AMD GPUs for 2026
- ASUS Beta BIOS Restores Ryzen 9000 Memory Encryption Ahead of AMD's July Timeline
- Best Budget 1TB SATA SSD 2026: BX500 vs WD Blue vs SanDisk Ultra 3D vs Samsung 870 EVO
- Best Controller for RetroPie & Pi Emulation: SN30 Pro vs DualSense
- N100 Mini PC vs Raspberry Pi 4 for Home Assistant in 2026
- Building a Silent Windows 98 Gaming PC in 2026: The Full Parts List
- AMD Ryzen AI Max+ 395: The 128GB Mini PC Running 70B LLMs Locally
- AI-Driven Win98 Voodoo Driver Install: A Repeatable Vision-LLM Playbook for the Sound Blaster Audigy FX
- Stable Diffusion WebUI Forge on an RTX 3060 12GB: Setup and Real Throughput
- Gemma 4 12B Runs Local: Best 12GB GPUs for Google's New Open Model
- Best Budget Streaming Starter Kit for 2026 (Under $200)
- Raspberry Pi 4 8GB vs Ryzen 5 5600G: Which Homelab Box Wins in 2026?
- GeForce 4 Ti 4600 AGP in 2026: Period-Correct Win98 Install Guide
- Open WebUI vs LM Studio: Best Local Chat Front-End for a 12GB GPU
- Local AI Server Build 2026: RAM, VRAM and NVMe for 13B+ Models
- Ryzen 5 5600G vs Core i7-9700K for 1080p Gaming
- Best GPU for 1440p Esports in 2026: RTX 3060 12GB Tested
- Noctua NH-U12S vs DeepCool AK620: Best Air Cooler for AM5 OC
- Building a 1999 GeForce 256 + Pentium III Win98 Rig in 2026
- Best Raspberry Pi Alternative for Klipper (2025 Guide)
- Raspberry Pi AI HAT+ Hits 26 TOPS for On-Device Inference
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090