SoJumpvr Controller Grips Cover Compatible with Meta Quest 3S/Quest 3 Accessories
Bottom line: The SoJumpvr Controller Grips Cover ($19.99 on Amazon as of 2026-10-08): Battery opening swaps AA cells without pulling the grip cover off; main trade-off: not compatible with the Quest charging dock while the covers are installed.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-08. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Battery opening swaps AA cells without pulling the grip cover off
- ✓ Soft silicone body with non-slip texture cuts controller slip mid-session
- ✓ PU knuckle strap padded with thickened sponge to ease hand-back pressure
- ✓ Nylon hook-and-loop strap adjusts tightness for different hand sizes
Cons
- ✗ Not compatible with the Quest charging dock while the covers are installed
- ✗ Batteries are not included in the package
- ✗ Silicone and sponge padding can trap sweat during long sessions
- ✗ Only fits Meta Quest 3 and Quest 3S controllers, no older Quest models
SpecPicks Verdict
SpecPicks scored SoJumpvr Controller Grips Cover using a rating × review-volume × price-fit model applied to published specs and reviews across the vr headsets & accessories category. SoJumpvr's vr headsets & accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for vr headsets & accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Solve the Trouble of Battery Replacement: The design of the battery opening can easily replace the battery without removing the entire controller grips cover. Tips: The plastic battery pull tab should be placed under the battery and Not for Charging Dock. If you have any problems, please tell us at any time, we will definitely give you a satisfactory solution!
- Comfortable Grip and Perfect Protection: The controller grip compatible with Quest 3/Quest 3S is made of soft silicone material, ensure that the controllers are held comfortably on your hands for extended gaming sessions. Enhanced grip with non-slip texture prevents controller slipping and provides better control. Reserved hole accommodates original wrist strap for added protection and stability. Perfectly protecting your controllers from scratches and dirt, enhancing your gaming experience!
- Innovative Knuckle Strap with Sponge: The knuckle strap is made of PU material and also with a comfortable and soft sponge, prevents excessive pressure or discomfort on the back of your hand during long gaming sessions, reducing the possibility of hand discomfort and fatigue.
- Excellent Adjustable: The nylon magic tape on the knuckle strap allows you to easily secure and adjust the length and tightness of the strap compatible with Quest 3/Quest 3S to fit different-sized hands. Can be slightly adjusted according to the needs of the game, making your hand movements smoother.
- Easy to Install and Remove: The unibody design makes the controller grip cover easy to install and remove. Package includes: 1 pair controller grip covers with knuckle straps(with sponge), 1 pair battery compartment covers, 1 pair joystick covers, 4 plastic battery pull tabs (two of them are already mounted on the battery cover). Note: Batteries not included!
Full Specifications
| Brand | SoJumpvr |
|---|---|
| Color | Red |
| Platform | Meta |
| Model Name | Quest 3 |
| Resolution | 1832 x 1920 per eye |
| Display Type | Single Fast-switch LCD |
| Model Number | Quest 3 |
| Built-In Media | 1 pair controller grip covers with knuckle straps(with sponge), 1 pair battery compartment covers, 1 pair joystick covers, 4 plastic battery pull tabs, 1 instruction manual |
| Connector Type | DisplayPort or HDMI |
| Controller Type | Motion-Sensing Controller or VR Controller |
| Special Feature | The battery opening design, Replace the battery quickly, Comfortable grip, Perfectly protect the controller |
| Sensor Technology | Accelerometer Gyroscope Inside-out tracking |
| Compatible Devices | Compatible with Meta Quest 3/Quest 3S |
| Additional Features | The battery opening design, Replace the battery quickly, Comfortable grip, Perfectly protect the controller |
| Included Components | 1 pair controller grip covers with knuckle straps(with sponge), 1 pair battery compartment covers, 1 pair joystick covers, 4 plastic battery pull tabs, 1 instruction manual |
| Warranty Description | If you have any problems, please tell us at any time |
| Age Range Description | All Ages |
| Age Range (Description) | All Ages |
| Connectivity Technology | Internet |
| Specific Uses For Product | Gaming |
| Full listing title | Controller Grips Cover Compatible with Meta Quest 3S/Quest 3 Accessories, Hand Strap with Battery Opening, Knuckle Straps with Widen and Thicken Sponge(Not for Charging Dock) (Red) |
Ready to buy?
Controller Grips Cover Compatible with Meta Quest 3S/Quest 3 Accessories, Hand Strap with Battery Opening, Knuckle Straps with Widen and Thicken Sponge(Not for Charging Dock) (Red) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-08. Price and availability subject to change.
Related VR Headsets & Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Imaging Vintage IDE Drives to Preserve 90s Game CDs
- Best Wired Mouse and Pad for FPS in 2026: Logitech G502 Hero and SteelSeries QcK
- Raspberry Pi AI Kit 2025: Specs, Uses, and Limits
- The Hackaday Europe 2026 Retro PC Build: What They Actually Built and Why It Matters
- DIY Ambient Home Hub: Raspberry Pi CM4 + ESP32-S3 for Kids
- Use a Raspberry Pi 4 as a Second Monitor or KVM in 2026
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Gaming PC
- Qwen3 8B: Raspberry Pi 4 8GB vs RTX 3060 12GB (2026)
- Add Wireless Controllers and More Games to Your SNES Classic & Genesis Mini in 2026
- Best Budget Local-LLM Box: RTX 3060 12GB + Ryzen 5 5600G
- Best Raspberry Pi 4 8GB Retro Emulation Setup in 2026
- Windows XP Gaming in 2025: Hardware, Fixes, Best Games
- 8BitDo SN30 Pro on SNES Classic and Genesis Mini: Bluetooth Setup Guide
- Best SATA SSD for a PS4 Slim and Emulation Box in 2026
- Ryzen 9 9950X3D vs Core Ultra 9 285K
- Sound Blaster Audigy FX in a Period-Correct WinXP Build: 2026 Install and Tuning Guide
- Gemma 4 12B Fits Multimodal AI Into 16GB of RAM
- Best Budget AM4 Gaming PC Parts in 2026
- Build a Home NAS on a Raspberry Pi 4 8GB in 2026
- Meta Is 'Token Managing' Now: Cut Local-LLM Cost on a Single RTX 3060
- Imaging Vintage IDE and SATA Drives in 2026: The Vantec CB-ISATAU2 Workflow
- The KVM That Runs a Pentium 4 Instead of a Raspberry Pi
- Best SSD for a Raspberry Pi 4 Media Server in 2026
- Best 16GB GPU for Local LLM 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090