Thermaltake
Thermaltake CT140 EX ARGB Reverse PC Cooling Fan Matcha Green 3-Fan Pack
Bottom line: The Thermaltake CT140 EX ARGB Reverse PC Cooling Fan Matcha Green 3-Fan ($69.99 on Amazon as of 2026-10-07): Reversed blades show ARGB from the intake side, no aesthetic tradeoff; main trade-off: 32.8 dBA at full 1800 RPM is audible in a quiet build.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Reversed blades show ARGB from the intake side, no aesthetic tradeoff
- ✓ 94.95 CFM airflow and 2.54 mm-H2O static pressure at 1800 RPM
- ✓ MagForce 2.0 magnetic pads speed up daisy-chaining the 3-fan pack
- ✓ 9 addressable LEDs sync over standard 5V ARGB motherboard headers
Cons
- ✗ 32.8 dBA at full 1800 RPM is audible in a quiet build
- ✗ Matcha Green frame limits color matching to greener build themes
- ✗ Reverse blades only help cases where airflow runs rear-to-front
- ✗ Needs a free 5V 3-pin ARGB header; 12V RGB boards will not sync
Manufacturer description
CT140 EX Reverse ARGB Sync is a new model of the CT series incorporating the new MagForce 2.0 for a better, quicker magnetic connection among fans. This fan maintains its 1800 RPM fan speed and has broken through its series limit to provide even better cooling performance. The CT140 EX Reverse ARGB Sync can generate 94.95 CFM of airflow and 2.54 mm-H2O static pressure while maintaining a 32.8 dBA noise level, pushing ARGB fans to their limits. Reversed blade fan enables airflow from rear to front while fully showing lighting effects. No more sacrificing aesthetics for your airflow direction…
SpecPicks Verdict
SpecPicks scored Thermaltake CT140 EX ARGB Reverse PC Cooling Fan Matcha Green 3-Fan… using a rating × review-volume × price-fit model applied to published specs and reviews across the cooling & fans category. Thermaltake's cooling & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cooling & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Reversed Blades Design: Ensures RGB lighting is visible from different airflow directions, enhancing aesthetics without sacrificing performance.
- MagForce 2.0 Technology: Provides quick magnetic connections with larger contact pads, improving installation efficiency and reliability.
- High Performance: Offers 94.95 CFM airflow and 2.54 mm-H2O static pressure, while maintaining a low noise level of 32. dBA.
- Comprehensive RGB Control: Features 9 addressable LEDs compatible with major motherboard sync software for extensive customization.
- Robust Construction: Designed with a solid frame and anti-vibration rubber pads to ensure stability and reduce noise.
Full Specifications
| Brand | Thermaltake |
|---|---|
| Model | CT140 EX Matcha Green Reverse |
| Voltage | 12 volts |
| Wattage | 9 watts |
| Material | Rubber |
| Noise Level | 32.8 db |
| Part Number | CL-F199-PL14MG-A |
| Compatibility | PC |
| Material Type | Rubber |
| Cooling Method | Fan |
| Number of Items | 1 |
| High Performance | Offers 94.95 CFM airflow and 2.54 mm-H2O static pressure, while maintaining a low noise level of 32. dBA. |
| Vibration/Rumble | Yes |
| Air Flow Capacity | 94.95 cfm |
| Compatible Devices | Desktop |
| Robust Construction | Designed with a solid frame and anti-vibration rubber pads to ensure stability and reduce noise. |
| Power Connector Type | 4-Pin |
| Warranty Description | 2 year manufacturer |
| Reversed Blades Design | Ensures RGB lighting is visible from different airflow directions, enhancing aesthetics without sacrificing performance. |
| MagForce 2.0 Technology | Provides quick magnetic connections with larger contact pads, improving installation efficiency and reliability. |
| Full listing title | Thermaltake CT140 EX ARGB Reverse PC Cooling Fan Matcha Green 3-Fan Pack, Magnetic Connection, 5V Motherboard Sync, 16.8 Million Colors 9 Addressable LEDs, 140 mm Case/Radiator Fan, CL-F199-PL14MG-A |
Ready to buy?
Thermaltake CT140 EX ARGB Reverse PC Cooling Fan Matcha Green 3-Fan Pack, Magnetic Connection, 5V Motherboard Sync, 16.8 Million Colors 9 Addressable LEDs, 140 mm Case/Radiator Fan, CL-F199-PL14MG-A is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Cooling & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- RTX 3060 vs RTX 5060 Ti — two generations apart
- Best Raspberry Pi Alternatives 2026: 5 SBCs After the Price Hikes
- Build a Retro Emulation Handheld on Raspberry Pi Zero W with RetroPie
- Pi Pico Puts Bluetooth Keyboards on the I2C Bus
- AMD Ryzen AI Max+ PRO 495 192GB: What the PassMark Leak Tells Us
- Active Quake 3 and OpenArena Servers in 2026 — How to Find and Join Them
- How to run Llama 3.1 70B on Apple M4 Max
- Building a 2003-Era LAN Party Rig: Pentium 4, GeForce FX 5900, Audigy 2 ZS
- GLM-5.2 Review: The Most Powerful Open-Weights LLM You Can Self-Host in 2026
- Best SSD to Upgrade a PS4 in 2026
- Best Gaming Webcam and Streaming Setup in 2026
- Can You Game While Ollama Runs? RTX 3060 12GB VRAM Contention
- HiDream-O1 1.5 Lands #3 in Text-to-Image: Can You Run It Locally on a 12GB GPU?
- Best Parts for a Local LLM Box That Also Runs Jellyfin in 2026
- Raspberry Pi 5 IOMMU Support Lands in Mainline Linux: What It Means
- Gemma 4 26B-A4B NVFP4 vs Qwen 3.6 27B Q4_K_M: Single-GPU Local Inference Benchmarked
- The $5M Sega Bet That Saved Nvidia — and Still Shapes GPU Launches
- How to Build a Fully Declarative Homelab Stack
- Building a 1998 Voodoo2 SLI Glide Rig in 2026: CompactFlash Boot and Quake II
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Homelab and Virtualization Box in 2026
- Asus ProArt PA27USD 27-Inch OLED Review: Color Meets Gaming Speed
- CompactFlash to IDE Adapter Won't Boot on Windows 98: Troubleshooting Guide 2026
- Best Raspberry Pi for Klipper in 2026: Pi 4 8GB vs Alternatives
- DeepSeek on the US Entity List: What It Means for Local Inference
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090