Apevia Hydra-WH Hydra Mid Tower Gaming PC Case with 6X 120MM ARGB Fans
Bottom line: Per its Amazon listing, the Apevia Hydra-WH Hydra Mid Tower Gaming PC Case with 6X 120MM ARGB Fans: can fit graphics cards up to 310mm in length and CPU coolers up to 155mm in height; pre-Installed ARGB Cooling System: 6x 120mm ARGB fans pre-installed in case.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Can fit graphics cards up to 310mm in length and CPU coolers up to 155mm in height
- ✓ Pre-Installed ARGB Cooling System: 6x 120mm ARGB fans pre-installed in case
- ✓ Backed by Apevia's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Apevia Hydra-WH Hydra Mid Tower Gaming PC Case with 6X 120MM ARGB Fans, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the pc cases category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for pc cases of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Modern Metal Mid Tower Design: High performance breathable airflow mesh front panel with plenty of room on the back side to hide and route cables. Comes with easy to remove mesh shield for cleaning. Can fit graphics cards up to 310mm in length and CPU coolers up to 155mm in height
- Pre-Installed ARGB Cooling System: 6x 120mm ARGB fans pre-installed in case, comes with 3pin ARGB connector on RGB fans for ARGB motherboard sync (Only compatible with ARGB motherboards). RGB fans has 366 RGB lighting modes via RGB light switch button on top of case (Press down on LED button for 5 seconds to switch to motherboard ARGB sync mode)
- Convenient Top Panel Connectivity: Top panel comes with 1 x USB 3.0, 2 x USB 2.0, and HD Audio jacks. Front panel water cooling options: 240mm. Room for up to 2 x 2.5" hard drives and 2 x 3.5" hard drives
- Magnetic Dust Filter Protection: Magnetic Dust Filter on the top panel for reducing dust falling into case. Easy to remove dust filter to wash and clean
- Optimal Component Compatibility: Supports video cards up to 310mm in length and CPU coolers up to 155mm in height, providing ample space for high-performance gaming components and efficient cable management throughout the chassis
Full Specifications
| Brand | Apevia |
|---|---|
| Color | White |
| Fan Size | 12 centimeters |
| Material | Metal |
| Case Type | Mid Tower |
| Model Name | HYDRA-WH |
| Light Color | rgb |
| Connectivity | USB |
| Model Number | HYDRA-WH |
| Compatibility | PC, Switch |
| Cooling Method | Air |
| Number of Fans | 6 |
| Mfr Part Number | HYDRA-WH |
| Total Usb Ports | 3 |
| Antenna Location | Gaming |
| Compatible Devices | ATX Motherboards, Graphics Cards up to 310mm, CPU Coolers up to 155mm, 240mm Front Panel Water Cooling, 2x 2.5" and 2x 3.5" Hard Drives |
| Enclosure Material | Metal |
| Total USB 2.0 Ports | 2 |
| Total USB 3.0 Ports | 1 |
| Warranty Description | 1 Year Limited Warranty (Visit our website for full details) |
| Full listing title | Apevia Hydra-WH Hydra Mid Tower Gaming PC Case with 6X 120MM ARGB Fans | 366 RGB Light Modes, High Airflow Mesh Front Panel, Tempered Glass Front & Side Panels, 1X USB3.0, 2X USB2.0, Dust Filter |
Ready to buy?
Apevia Hydra-WH Hydra Mid Tower Gaming PC Case with 6X 120MM ARGB Fans | 366 RGB Light Modes, High Airflow Mesh Front Panel, Tempered Glass Front & Side Panels, 1X USB3.0, 2X USB2.0, Dust Filter is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related PC Cases
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Adding USB Storage to a Windows 98 PC With a SATA/IDE Adapter
- AMD Instinct MI300X vs Radeon RX 7600 XT: Datacenter vs Desk
- Logitech G920 vs Thrustmaster: Best Beginner Sim Racing Setup 2026
- GameSir G7 SE vs 8BitDo Pro 2: Best Wired-vs-Wireless PC Controller
- Best CPU Cooler for Intel Core i7/i9 Builds in 2026
- AMD Ryzen 7 9800X3D Bundle: DDR5 + MSI B850 Wi-Fi 7 Guide
- Home Assistant on a Raspberry Pi 4 8GB: Full 2026 Setup
- Raspberry Pi Projects for College Students: 2026 Guide
- GameSir G7 SE vs DualSense for PC Gaming in 2026
- Best Raspberry Pi Heatsink and Cooling Kits for Pi 5 in 2026
- MSI Raider 16 Max HX Review: Elite Gaming and Creator Power
- Ryzen 7 5800X vs Ryzen 5 5600G for 1080p Gaming and Light Local LLM Work
- Tesla P40 vs RTX 3090: Used 24GB GPUs for Local LLMs in 2026
- Qwen 3.6 27B with MTP: 2.5x Throughput on Local Hardware (Real Benchmarks)
- Build a Silent Windows 98 Boot Drive with CompactFlash + IDE
- Best GPU for Local LLMs Under $350: Why the RTX 3060 12GB Still Wins
- Best Plug-and-Play Retro Gaming Consoles in 2026: 5 Picks
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5070
- Should You Overprovision vCPU Per VM in a Homelab?
- Best 4K Monitor Under $300 for RTX 3060 12GB Gaming in 2026
- How Companies Name Their Monitors: Brand-by-Brand Guide
- Best GPU for Local LLMs in 2026: Why the RTX 3060 12GB Still Wins on Value
- Ryzen AI Max 385 Mini PC: Specs and What It's Really For
- Lemonade v10.5.1: an MTP + ROCm 7.13 quick start for Strix Halo
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090