1238 Fan 120mm 38mm DC 12V 2Pin High 160 CFM Brushless Dual Ball Bearing 4500RPM
Bottom line: Per its Amazon listing, the 1238 Fan 120mm 38mm DC 12V 2Pin High 160 CFM Brushless Dual Ball: advantage: 60,000 hours at normal temperatures, longer than sleeve bearing fan; one package includes: 1Pcs 120mm X 38mm fan, 2pcs grills, 4pcs screws & nuts.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ One package includes: 1Pcs 120mm X 38mm fan, 2pcs grills, 4pcs screws & nuts.
- ✓ Backed by GUIANDJING's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for 1238 Fan 120mm 38mm DC 12V 2Pin High 160 CFM Brushless Dual Ball…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- High Performance: 12038 exhaust fan; Rated Voltage: DC 12V; Rated Current: 1.5A; Power: 18W; Rated Speed: 4500 RPM; High Air flow: 160 CFM; Noise: 50dBA.
- Dimension: 12cm x 12cm fan or 4.72in (L) x 4.72in (W) x 1.5in (H); the distance between mounting holes is 105mm or 4.13in; connector: XH2.54, 2Pin, red wire is Positive(+) , Black Wire is Negative(-), same length of the two wire is 380mm or 15 inch.
- Advantage: 60,000 hours at normal temperatures, longer than sleeve bearing fan. long lifespan and excellent heat dissipation performance, high speed, low noise.
- One package includes: 1Pcs 120mm X 38mm fan, 2pcs grills, 4pcs screws & nuts.
- Before purchasing, please make sure that this fan is consistent with your needs and meets your application. Main confirmation voltage, current, size, connector type (XH2.54 2pin).
Full Specifications
| Brand | GUIANDJING |
|---|---|
| Model | GAJDH12028B |
| Voltage | 12 volts_of_direct_current |
| Wattage | 18 watts |
| Material | Plastic |
| Advantage | 60,000 hours at normal temperatures, longer than sleeve bearing fan. long lifespan and excellent heat dissipation performance, high speed, low noise. |
| Unit Count | 1 Count |
| Noise Level | 50 sones |
| Part Number | D38B-2pin |
| Material Type | Plastic |
| Cooling Method | Air |
| Number of Packs | 1 |
| High Performance | 12038 exhaust fan; Rated Voltage: DC 12V; Rated Current: 1.5A; Power: 18W; Rated Speed: 4500 RPM; High Air flow: 160 CFM; Noise: 50dBA. |
| Air Flow Capacity | 160 cfm |
| Compatible Devices | Desktop |
| Included Components | fan |
| One package includes | 1Pcs 120mm X 38mm fan, 2pcs grills, 4pcs screws & nuts. |
| Power Connector Type | 2-Pin |
| Maximum Rotational Speed | 4500 rpm |
| Item Dimensions L x W x H | 4.72"L x 1.5"W x 4.72"H |
Benchmark data for other processors
Ready to buy?
1238 Fan 120mm 38mm DC 12V 2Pin High 160 CFM Brushless Dual Ball Bearing 4500RPM is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Best CompactFlash + IDE Adapters for Retro PC Builds in 2026
- Best PC and Emulation Controllers in 2026
- vLLM 0.21 Adds Intel Arc Support: The Local Stack Widens
- Acti Puts AI Agents in Your Keyboard: On-Device vs Local-GPU Inference
- DeepSWE vs SWE-Bench Pro: The Coding-Agent Benchmark Shakeup
- Running DeepSeek Distills Locally on a Ryzen 7 5800X + RTX 3060
- Best Wheel and Controller for Truck and Farm Sims in 2026
- Stable Diffusion WebUI Forge on an RTX 3060 12GB: Setup and Real Throughput
- Noctua NH-U12S vs Cooler Master ML240L RGB for a Ryzen 7 5800X gaming build: which cooler actually holds…
- Asus ROG Harpe II Extreme: 24K-Gold, 65K-Sensor Gaming Mouse
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget 1080p Gaming Build
- Best Gaming Monitor for 2026: 5 Picks from 1440p to 4K
- A Practical Look at the PlayStation Architecture — and Why It Still Matters
- Raspberry Pi AI HAT+ 26 TOPS: Specs, Setup, and Verdict
- Stable Diffusion WebUI Forge in 2026: Faster Inference on the RTX 3060 12GB
- Ryzen AI Max+ 'Gorgon Halo' 192GB vs RTX 3060 12GB for Local LLMs
- RTX 5060 8GB vs RTX 4070 12GB for Qwen3 14B: Does 8GB Fit? (2026)
- Best SATA SSD for Retro PC Upgrades in 2026
- pxpipe Hides Prompts in PNGs to Cut Claude Code Tokens 70% — Or Just Run Local on an RTX 3060
- Logitech G920 vs HORI Racing Wheel: Best Starter Sim Wheel in 2026
- GPU-Accelerated Autorouter Handles Monstrous PCB Designs
- This Retro Switch 2 Dock Looks Exactly Like an N64 — and Holds Six Cards
- Microsoft's SkillOpt Boosts Models With Just a Markdown File — What It Means for Your Local RTX 3060 Rig
- Ryzen 5 5600G vs Ryzen 7 5800X for a Budget 2026 Build
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090